• 대한설비공학회:학술대회논문집
• /
• 대한설비공학회 2009년도 하계학술발표대회 논문집
• /
• pp.827-832
• /
• 2009

Exergy is the amount of reversible work obtainable when some matter is brought to a state of thermodynamic equilibrium with ambient. This exergy is availability or useful work induced from carnot cycle, and this can calculate the irreversible loss work which occurs within any thermal or power cycle. The exergy ratio is the value of exergy divided by enthalpy of ambient reference, where the quality of energy or enthalpy in substances is evaluated by exergy ratio. Exergy is very important in optimal design method of thermal system or each component, and the value of exergy at given state is calculated by equation. Here, designer can easily understand and find the value of enthalpy because enthalpy is graphically drawn in chart, however exergy did not. In this paper, exergy and exergy ratio of air were drawn on temperature-entropy chart, and we wish to this chart is a help to design, analysis and education.

• KIEE International Transactions on Power Engineering
• /
• 제12A권1호
• /
• pp.31-35
• /
• 2002

This paper presents a new operation scheme of UPFC to minimize both generation costs and active power losses in a normal operation state of power system. In a normal operation, cost minimization is a matter of primary concern among operating objectives. This paper considers two kinds of costs, generation costs and transmission losses. The total generation cost of active powers can be minimized by optimal power flow, and active power losses in the transmission system can be also minimized by power flow control of UPFC incorporated with minimization of generation costs. In order to determine amounts of active power reference of each UPFC required for the cost minimization, an iterative optimization algorithm based on the power flow calculation using the decoupled UPFC model is proposed. For verification of the proposed method, intensive studies have been performed on a 3-unit 6-bus system equipped with a UPFC.

• 대한조선학회지
• /
• 제8권1호
• /
• pp.103-118
• /
• 1971

Ferro-cement is a composite material made of portland cement mortar and wire(or chicken wire) reinforcement. In most cases, as a shipbuilding material, reinforcing steel rods and steel pipes are also used. This report will review the technique of ferro-cement boat building and will guide the working details. Beyond these, this report will present some test results of the ferro-cement test pannels and will compare those with the other well known shipbuilding material. As a matter of fact ferro-cement application to the shipbuilding material is quite not a new theory. There were already lots of case studies and actual ship building applications. But the technique to do this is not easily available to the interested persons and amateur shipbuilders. Therefore this report will stress most its "state-of-the-art review" and give kind guidance in using ferro-cement as a shipbuilding material. For the more interested research worker, technical references as much as listable are printed in the bibliography section on this report.

• 세라미스트
• /
• 제10권3호
• /
• pp.91-97
• /
• 2007

Femtosecond laser micro-processing received much attention in the past decade. The nature of ultra-short light-matter interaction permits femtosecond laser to overcome the diffraction limit and realize precise micro-processing. The ultrahigh light intensity of the femtosecond laser allows sapece-selective microscopic modifications to materials based on multiphoton processes. In this paper, we review our recent research development on space-selective precipitation and control of functional crystals in glasses by an infrared femtosecond laser. The technique will open new possibilities in the fabrication of micro-optical components with various optical functions.

• 대한수학회지
• /
• 제31권4호
• /
• pp.569-608
• /
• 1994

The subject matter of this survey has to do with holomorphic maps from a compact Riemann surface to projective space, which are also called algebrac curves; the theory we survey lies at the crossroads of function theory, projective geometry, and commutative algebra (although we should mention that the present survey de-emphasizes the algebraic aspect). Algebraic curves have been vigorously and continuously investigated since the time of Riemann. The reasons for the preoccupation with algebraic curves amongst mathematicians perhaps have to do with-other than the usual usual reason, namely, the herd mentality prompting us to follow the leads of a few great pioneering methematicians in the field-the fact that algebraic curves possess a certain simple unity together with a rich and complex structure. From a differential-topological standpoint algebraic curves are quite simple as they are neatly parameterized by a single discrete invariant, the genus. Even the possible complex structures of a fixed genus curve afford a fairly complete description. Yet there are a multitude of diverse perspectives (algebraic, function theoretic, and geometric) often coalescing to yield a spectacular result.

• Transactions on Electrical and Electronic Materials
• /
• 제13권1호
• /
• pp.2-5
• /
• 2012

We have designed, synthesized, and evaluated the physical properties of some high birefringence (${\Delta}n$) isothiocyanato biphenyl-bistolane liquid crystals. These compounds exhibit ${\Delta}n^-$ 0.4-0.7 at room temperature and wavelength $\lambda$=633 nm. Laterally substituted short alkyl chains and fluorine atom eliminate smectic phase and lower the melting temperature. The moderate melting temperature and very high clearing temperature make those compounds attractive for eutectic mixture formulation. Several mixtures based on those compounds were formulated and its physical properties evaluated.

• 진공이야기
• /
• 제1권2호
• /
• pp.4-8
• /
• 2014

On this earth, we usually encounter three states of matter: solid, liquid, and gas. Those are the states we experience directly and most often in everyday life. However, if we consider the whole universe, more than 99.99 percent of our visible universe is in plasma state. The earth is in very unusual situation in the universe, and it is great virtue to whole creatures on this planet. In the beginning of the universe, however, there was only plasma. The other stuff came later after then. The Big Bang, beginning of our universe, was dominated by high-temperature plasma. It is where we all came from, and it continues to play a major role not only in our universe but also in various industrial applications of human being.

• 한국산학기술학회논문지
• /
• 제19권5호
• /
• pp.64-71
• /
• 2018

본 논문은 호기성 생분해도를 통하여 유가공 폐수의 기질특성을 파악하기 위하여 수행되었다. 유기물 중 빨리 분해되는 물질(Ss)은 SCODcr 기준을 84.2 %로 조사되었는데, 이는 수산물 가공폐수의 75.8~77.9 %, 돈사폐수의 58.2 % 보다 높은 것으로 조사되었다. 생물학적 분해 불가능한 용존성 유기물(SI)의 비율은 5.6~6.4 %로, 미생물 신진대사에 의해 발생 되는 inert 물질 비율(SIi)은 3.6~3.7 %로 조사되었다. 생물학적 분해 불가능한 용존성 유기물 성분의 함유 계수(YI) 0.092~0.099로, 미생물 신진대사로 생성되는 inert 물질의 생성계수(Yp)는 0.039~0.040으로 산정되었다. 유기물 성분 계수 분석결과, 유가공 폐수의 용존성 유기물 약 91.0 %가 생물학적으로 분해 가능한 물질이고, 이중 약 92.5 %가 빨리 분해되는 Ss 성분으로 조사되었다. 또한 총유기물(TCODcr) 중에 생물학적 분해 가능한 유기물의 비율은 89.3 %로 조사되었다. 생물학적 분해 불가능한 용존성 유기물(SI) 성분은 3.0 %, 생물학적 분해 불가능한 부유성 물질(XI) 성분은 7.7 %로 비교 대상 폐수보다 낮게 조사되었는데, 이는 유가공 폐수가 호기성 생분해도가 크다는 것을 의미한다.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2003년도 하계학술대회 논문집 Vol.4 No.2
• /
• pp.938-941
• /
• 2003

It is well known that the state of existence of molecules on the surface of water changes during compression of the molecules. Electric methods, such as measurement of the surface potential or displacement current are also useful for investigating dynamic changes of molecular state on the water surface during compression and Transformation of molecular film occurs only usually in air-water interface, 2 dimensions domain's growth and crash are achieved. Organic thin film that consist of growth of domain can understand correct special quality of accumulation film supplying information about fine structure and properties of matter of device observing information and so on that is surface forward player and optic enemy using AFM one of SPM application by nano electronics. In this paper Langmuir (L) that is one of basis technology to manufacture of organic matter device using biology material PBDG that is kind of polypeptide that have biology adaptedness. The Experiment method used ${\pi}-A$ isotherm and BAM(Brewster Angle Microscopy), using the BAM, we can to the molecular orientation of monolayer on the water surface and directly see the morphology of the films on water subphase as well as that of the films.

• Asian-Australasian Journal of Animal Sciences
• /
• 제25권10호
• /
• pp.1430-1438
• /
• 2012

The present experiment was conducted to determine the digestible energy (DE), metabolizable energy (ME) content, and the apparent total tract digestibility (ATTD) of energy in growing pigs fed diets containing one of ten cottonseed meals (CSM) collected from different provinces of China and to develop in vitro prediction equations for DE and ME content from chemical composition of the CSM samples. Twelve growing barrows with an initial body weight of $35.2{\pm}1.7$ kg were allotted to two $6{\times}6$ Latin square designs, with six barrows and six periods and six diets for each. A corn-dehulled soybean meal diet was used as the basal diet, and the other ten diets were formulated with corn, dehulled soybean meal and 19.20% CSM. The DE, ME and ATTD of gross energy among different CSM sources varied largely and ranged from 1,856 to 2,730 kcal/kg dry matter (DM), 1,778 to 2,534 kcal/kg DM, and 42.08 to 60.47%, respectively. Several chemical parameters were identified to predict the DE and ME values of CSM, and the accuracy of prediction models were also tested. The best fit equations were: DE, kcal/kg DM = 670.14+31.12 CP+659.15 EE with $R^2$ = 0.82, RSD = 172.02, p<0.05; and ME, kcal/kg DM = 843.98+25.03 CP+673.97 EE with $R^2$ = 0.84, RSD = 144.79, p<0.05. These results indicate that DE, ME values and ATTD of gross energy varied substantially among different CSM sources, and that some prediction equations can be applied to predict DE and ME in CSM with an acceptable accuracy.