• Journal of Electrical Engineering and Technology
• /
• 제13권4호
• /
• pp.1474-1482
• /
• 2018

As an essential means of generator voltage regulation, excitation control plays an important role in controlling the stability of the power system. Therefore, the reasonable design of an excitation controller can help improve the system stability. In order to raise the robustness of the generator exciting system under outside interference and parametric perturbation and eliminate chattering in the sliding mode control, this paper presents a generator excitation control based on the quasi-sliding mode pseudo-variable structure control. A mathematical model of the synchronous generator is established by selecting its power, speed and voltage deviation as state variables. Then, according to the existing conditions of the quasi-sliding mode, a quasi-sliding mode pseudo-variable structure controller is designed, and the parameters of the controller are obtained with the method of pole configuration. Simulations show that compared with the existing methods, the proposed method is not only useful for accurate voltage regulation, but also beneficial to improving the robustness of the system at a time when perturbance happens in the system.

• Journal of Power Electronics
• /
• 제11권3호
• /
• pp.369-374
• /
• 2011

Usually, a LPF (low pass filter) is used in the feedback loop of a SRF (synchronous reference frame) - PLL (phase locked loop) system because the measured grid voltage contains harmonic distortions and sensor noises. In this paper, it is shown that the cut-off frequency of the LPF should be designed to suppress the harmonic ripples contained in the measured voltage. Also, a new design method for the loop gain of the PI-type controller in the SRF-PLL is proposed with consideration of the dynamics of the LPF. As a result, a better transient response can be obtained with the proposed design method. The LPF frequency and the PI controller gain are designed in coordination according to the steady state and dynamic performance requirements. Furthermore, in the proposed method, the controller gain and the LPF cut-off frequency are changed from their normal value to a transient value when a voltage disturbance is detected. This paper shows the feasibility and usefulness of the proposed methods through the computer simulations and experimental results.

• 해양환경안전학회지
• /
• 제25권3호
• /
• pp.306-312
• /
• 2019

This paper investigates to design a controller for maritime autonomous surface ship (MASS) by means of adaptive super-twisting algorithm (ASTA). A input-out feedback linearization method is considered for multi-input multi-output (MIMO) system. Sliding Mode Controller (SMC) is suitable for MASS subject to ocean environments due to its robustness against parameter uncertainties and disturbances. However, conventional SMC has inherent disadvantages so-called, chattering phenomenon, which resulted from the high frequency of switching terms. Chattering may cause harmful failure of actuators such as propeller and rudder of ships. The main contribution of this work is to address an appropriate controller for MASS, simultaneously controls surge and yaw motion in severe step inputs. Proposed control mechanism well provides convergence bewildered by external disturbances in the middle of steady-state responses as well as chattering attenuation. Also, the adaptive algorithm is contributed to reducing non-overestimated value of control gains. Control inputs of surge and yaw motion are displayed by smoother curves without excessive control activities of actuators. Finally, no overshoot can be seen in transient responses.

• 한국전자통신학회논문지
• /
• 제17권3호
• /
• pp.399-408
• /
• 2022

본 논문에서는 기본 모드 원리를 침해하는 과도 고장이 존재하는 입력/출력 비동기 순차 회로의 내고장성 교정 제어 시스템을 제안한다. 비동기 순차 회로의 과도 천이 과정에서 발생하는 비-기본 모드 고장을 극복하기 위해서는 고장에 의한 상태 천이가 종료되는 시점을 알아야 하며, 회로를 고장 상태로부터 원래 도달해야 하는 상태와 출력 등가적인 상태로 보내기 위한 교정 동작을 구현해야 한다. 본 논문에서는 이러한 고장 탐지 및 극복을 구현할 수 있는 출력 피드백 교정 제어기의 존재 조건을 규명한다. FPGA 실험을 통해 제안된 제어 시스템의 설계 과정을 제시하고 응용 가능성을 검증한다.

• Journal of Electrical Engineering and Technology
• /
• 제12권1호
• /
• pp.236-248
• /
• 2017

A direct stator flux vector control scheme in discrete-time domain is proposed in this paper for the interior permanent magnet synchronous motor (IPMSM) drive to remove the proportional-integral (PI) controller from the direct torque control (DTC) scheme applied to IPMSM and to obtain faster dynamic response and lower torque ripple output. The output of speed outer loop is used as the desired torque angle instead of the desired torque in the proposed scheme. The desired stator flux vector in dq coordinate is calculated with a given amplitude. The state-space equations in discrete-time for IPMSM are established, the actual stator flux vector is estimated in deadbeat manner by a full-order state observer, and then the closed-loop control is achieved by the pole placement. The stator flux error vector is utilized to calculate the reference stator voltage vector. Extracting the angle position and amplitude from the estimated stator flux vector and estimating the output torque are eliminated for the direct feedback control of the stator flux vector. The proposed scheme is comparatively investigated with a PI-SVM DTC scheme by experiment results. Experimental results show the feasibility and advantages of the proposed control scheme.

• 제어로봇시스템학회논문지
• /
• 제22권11호
• /
• pp.912-918
• /
• 2016

This paper presents various strategies for humanoid vehicle driving and egress tasks. For driving, a tele-operating system that controls a robot based on a human operator's commands is built. In addition, an autonomous assistant module is developed for the operator. Normal position control can result in severe damage to robots when they egress from vehicles. To prevent this problem, another approach that mixes various joint control techniques is adopted in this study. Additionally, a footplate is newly designed and attached to the vehicle floor for the ground landing phase of the egress task. The attached plate enables the robot to step down onto the ground in a safe manner. For stable locomotion, a balance controller is designed for the humanoid. For the design of the controller, the robot is modeled using an inverted pendulum that consists of a spring and a damper. Then, a state feedback controller (with pole placement and a state observer) is built based on the simplified model. Many approaches that are presented in this paper were successfully applied to a full-sized humanoid, DRC-HUBO+, in the DARPA Robotics Challenge Finals, which were held in the United States in 2015.

• 전력전자학회논문지
• /
• 제4권4호
• /
• pp.349-356
• /
• 1999

본 논문에서는 철도차량용 보조전원장치에 순시전압제어기법을 적용할 때 발생하는 문제들의 해결방안을 제시한다. 비선형부하나 과도상태에서 빠른 응답특성을 얻기 위해 순시전압제어기법을 사용할 때 LC 필터의 공진문제와 존재하는 정상상태 오차가 더욱 심각해진다. 인버터 출력측 LC 필터에 기인하는 공진현상을 억제하기 위해 전압전달함수의 제동비를 증가시키기 위한 방안으로 필터 커패시터 궤환제어기가 고려되었다. 그리고 교류전압 순시제어시 존재하는 정상상태 오차를 제거하기 위하여 고이득 전달함수를 기존의 PI 제어기에 첨가하였다. 이론적인 분석이 시뮬레이션 결과와 함께 잘 설명되어져 있다. 제안된 기법의 타당성을 5kVA급 시제품에 대한 시뮬레이션과 실험을 통하여 입증하였다.

• 전력전자학회논문지
• /
• 제3권3호
• /
• pp.214-221
• /
• 1998

직접 구동용 브러시 없는 직류전동기(BRUSHLESS direct drive motor : BLDD motor)의 강인한 위치제어를 위해 신경망을 사용하여 접근하는 새로운 제어방식이 소개된다. 전향 신경망이 추가된 선형 2차 제어기는 AC서보의 객체지향 방법을 사용함으로서 대략적으로 선형화 되어지는 강인한 BLDD 모터 시스템을 얻기 위해 사용된다. 구동 상태의 온-라인 위상에서 학습되는 이 신경망은 전향신호와 오차 역 전파법(Back-Propagation Method)에 의해 구성된다. 총 노드의 수가 8개이기 때문에 이 시스템은 일반적인 마이크로 프로세서에 의해 쉽게 실현될 수 있다. 일반적인 작동중, 입출력 응답은 표본화되어지고 가중치는 매개변수 또는 부하 토크의 능한 변이를 적용하기 위해 각 표본주기에서 오차 역 전파법에 의해 학습된다. 그리고, 상태공간에서 시스템 분석은 상태 궤환 이득을 얻기 위해 체계적으로 실행했다. 또한, 강인성은 전반적인 시스템응답에 영향력을 주지 않고 얻어진다.

• KIEE International Transaction on Electrical Machinery and Energy Conversion Systems
• /
• 제3B권1호
• /
• pp.1-9
• /
• 2003

This paper deals with the nodal admittance approach steady-state frequency domain analysis of the three-phase self-excited induction generator (SEIG) driven by the variable speed prime mover as the wind turbine. The steady-state performance analysis of this power conditioner designed for the renewable energy is based on the principle of equating the input mechanical power of the three-phase SEIG to the output mechanical power of the variable speed prime mover mentioned above. Us-ing the approximate frequency domain based equivalent circuit of the three-phase SEIG. The main features of the present algorithm of the steady-state performance analysis of the three-phase SEIG treated here are that the variable speed prime mover characteristics are included in the approximate equivalent circuit of the three-phase SEIG under the condition of the speed changes of the prime mover without complex computations processes. Furthermore, a feedback closed-loop voltage regulation of the three-phase SEIG as a power conditioner which is driven by variable speed prime movers such as the wind turbine(WT) employing the static VAR compensator(SVC) circuit composed of the thyristor phase controlled reactor(TCR) and the thyristor switched capacitor(TSC) controlled by the PI controller is designed and considered for wind-turbine driving power conditioner.

• 조명전기설비학회논문지
• /
• 제19권7호
• /
• pp.113-121
• /
• 2005

본 논문에서는 오존발생장치의 전원측 파형에 포함되는 고주파수의 노이즈를 제거하고, 디지털 궤환 제어에 의해 오존 출력을 제어하기 위하여 전원장치의 출력측 LC 필터와 방전관 용량으로부터 커패시터 전압과 전류를 검출하여 2중의 제어루프를 설계하였다. 디지털 제어기의 연산지연시간을 보상하기 위하여 연산지연시간을 전원장치 플랜트의 고유한 파라미터로 가정하고, 플랜트 모델에 포함시켜 모델링 하였다. 오존발생장치의 부하변동에 따르는 과도상태 응답특성을 개선하고, 파라미터 변동에 강인한 특성을 얻기 위하여 내부 전류 모델 제어기를 제안하였다. 또한 오존발생장치용 전원장치에서 영 오차의 정상 상태를 얻기 위하여 외부 전압 제어루프를 구성하여 비례 제어기와 공진 제어기를 병렬로 연결한 비례-공진 전압제어기를 제안하였다.