• 한국추진공학회지
• /
• 제3권3호
• /
• pp.40-46
• /
• 1999

풍력발전용 회전날개의 공력성능과 시동특성은 정격출력 및 운용방법 등의 전체적인 시스템 성능을 결정짓는 중요한 요소이다. 따라서, 풍력발전용 회전날개를 설계한 경우 공력성능과 풍속 및 깃각에 따른 시동특성은 반드시 검토되어야 한다. 이를 위해 본 연구에서는 수평축 풍력발전용으로 개발된 회전날개의 공력성능을 해석하기 위한 프로그램을 개발하였으며, 타당성 검증을 위해 상용화 되어있는 회전날개의 공력성능해석을 수행한 결과 회사측에서 제시한 실험치와 잘 일치함을 확인하였다. 또한 개발된 공력 해석 프로그램을 바탕으로 시동특성 해석 프로그램을 개발하여 분석한 결과 우리나라와 같이 저풍속에서 운용되는 풍력발전기에는 가변깃각 제어방식이 유리함을 확인하였다.

• 대한전기학회논문지:전력기술부문A
• /
• 제52권10호
• /
• pp.563-570
• /
• 2003

When a fault occurs on railway feeders it is very important to detect the fault to protect trains and facilities. Because a DC railway system has low feeder voltage, The fault current can be smaller than the current of load starting. So it is important to discriminate between the small fault current and the load starting current. The load starting current increases step by step but the fault current increases at one time. So the type of $\Delta$I/ relay(50F) was developed using the different characteristics between the load starting current and the fault current. The load starting current increases step by step so the time constant of each step is much smaller than that of the fault current. First, to detect faults in DC railway systems, an algorithm using the time constant calculated by the method of least squares is presented in this paper. If a fault occurs on DC railway systems it is necessary to find a fault location to repair the faulted system as soon as possible. The second aim of the paper is to calculate the accurate fault location using Kirchhoff's voltage law.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2002년도 추계학술대회 논문집 전기기기 및 에너지변환시스템부문
• /
• pp.73-75
• /
• 2002

Single phase SRM(switched reluctance motor) is very simple in structure and in driving circuit than three phase SRM. But it can't be started by itself. The prototype of salient pole rotor type single phase SRM was fabricated in former research and the starting device was installed in bottom of the rotor for generating start torque. The starting device is composed of permanent magnet and it is placed the rotor at specific position which is generated positive torque when the prototype is started. Therefore the prototype was started by itself but it is also affected the torque and the speed in operation. On this paper, the influence of the starting device on no-load speed of the prototype was confirmed by measurement of no-load speed according to installation of the starting device or not.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2000년도 추계종합학술대회 논문집(2)
• /
• pp.79-82
• /
• 2000

This paper describes a delay locked loop with selective starting point for use in a high-frequency systems. SSRDLL (selective starting point RDLL) has been simulated in a 0.25$\mu\textrm{m}$ standard n-well CMOS process parameter to realize a fast lock-on time. This DLL is shown to be insensitive to variations in PVTL. The simulated lock time of the proposed SSRDLL is within 4 clock cycles at 333㎒ clock input.

• 한국조명전기설비학회:학술대회논문집
• /
• 한국조명전기설비학회 2008년도 춘계학술대회 논문집
• /
• pp.130-132
• /
• 2008

In the gas discharge lamp, starting procedure is composed of several physical discharge phases. The detailed phenomena are different according to lamp characteristics and ballasting method. This paper reviews starting methods in fluorescent lamp, and the starting procedure of HID lamp are investigated based on reviewed various waveforms.

• Management Science and Financial Engineering
• /
• 제14권2호
• /
• pp.89-104
• /
• 2008

Growth curves including Bass, Logistic and Gompertz functions are widely used in forecasting the market demand. Nonlinear least square method is often adopted for estimating the model parameters but it is difficult to set up the starting value for each parameter. If a wrong starting point is selected, the result may lead to erroneous forecasts. This paper proposes a method of selecting starting values for model parameters in estimating some growth curves by nonlinear least square method through grid search and transformation into linear regression model. Resealing the market data using the national economic index makes it possible to figure out the range of parameters and to utilize the grid search method. Application to some real data is also included, where the performance of our method is demonstrated.

• 조명전기설비학회논문지
• /
• 제18권4호
• /
• pp.97-103
• /
• 2004

단상 유도전동기의 기동전류는 정격전류의 3-6배로 전등의 명멸, TV 화면의 산란, 전동기의 절연 열화, 옥내배선의 순간적인 열화 등을 발생시켜 전력손실, 가전제품의 효율저하 및 수명을 단축시키고 있다. 이러한 문제점을 개선하기 위해 본 논문에서는 트라이액과 교류변류기를 사용하여 기동전류를 3.7(%) 감소시키는 방법을 제안하였으며, 또한 반도체 소자를 사용함으로써 수명은 반영구적임을 확인하였다.

• Journal of Electrical Engineering and Technology
• /
• 제13권6호
• /
• pp.2268-2275
• /
• 2018

This paper presents a high-efficiency low-power permanent magnet (PM) generator for the power supply of the generator exciter. In the conventional generator system, the power for the exciter is fed by the generator output power or an emergency battery for the starting. The proposed low-power PM generator can generate the proper power and voltage to excite the exciter field winding. According to the starting of the generator, the designed PM generator can supply the constant voltage to the Automatic Voltage Regulator (AVR), then it can be used to control of exciter field current for the generator. Because of the designed PM generator which is placed inside the conventional generator system, the emergency battery and Potential Transducer(PT) for AVR can be removed. Thus, the total efficiency can be improved. The proposed generator system is tested in the practical system. And the efficiency characteristic is analyzed.

• Journal of Mechanical Science and Technology
• /
• 제18권6호
• /
• pp.895-903
• /
• 2004

In this paper are presented the blade vibration characteristics at the starting conditions of the low pressure multistage axial compressor of heavy-duty 100 MW gas turbine. Vibration data have been collected through strain gauges during aerodynamic tests of the model compressor. The influences of operating modes at the starting conditions are investigated upon the compressor blade vibrations. The exciting mechanisms and features of blade vibrations are investigated at the surge, rotating stall, and buffeting flutter. The influences of operating modes upon blade dynamic stresses are investigated for the first and second stages. It is shown that a high dynamic stress peak of 120 MPa can occur in the first stage blades due to resonances with stall cell excitations or with inlet strut wake excitations at the stalled conditions.

• 전기학회논문지
• /
• 제62권5호
• /
• pp.632-638
• /
• 2013

In this study, we described voltage fluctuation characteristics of distribution line during starting and normal operation condition of the small hydro generators. Based on these theories, we scrutinized the starting and operating characteristics of induction generators installed in two small hydro power plants that is connected to the distribution line and researched necessary factors when selecting the generator type. The type of turbines and capacity of generators are different. One is below 1,000kW and the other is above 1,000kW. Two generators are tested during starting, and it acts as motor not generator at the instant that the machine is connected to the grid. After connecting to the grid, the machine rotates above synchronous speed before converting to the generator mode. Therefore the characteristic of the generator during starting is same as it of motor.