• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.37 no.4 s.112
• /
• pp.38-43
• /
• 2005

Natural Com Starch(NCS) spray system has been widely used In multiply board mill for the better bonding strength between board layers. However the unsuitable NCS spray system could lead to a drop in plybond efficiency of multiply board. It could also result in the accumulation of unretained-starch in the white water system, which could not only rise in BOD and COD level but also reduce the effects of rosin-alum sizing system and other additives. In this study, the simple and rapid method by UV-spectroscopy for measuring the starch contents in the white water was proposed, and the quantitative analysis for dissolved starch content in white water was carried out in two kinds of board production process. It could be confirmed that about 150 ppm of oxidized starch was retained in white water dewatered from undertop ply of multiply board process, and about 470 ppm of natural starch was dissolved in white water originated from unsuitable spraying system in the multiply board production lines for cup base paper.

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.39 no.3
• /
• pp.12-23
• /
• 2007

Frequently spraying of natural starch slurry onto the formed wet web has been adopted to improve properties of paperboards. This conventional starch spraying technique, however, becomes less effective in strength improvement. In this study the effects of various factors including wet web dryness, quantity of starch slurry sprayed, and drying temperature on paperboard properties were investigated. Migration of starch granules into the webs appeared to cause a reduction in plybond strength when the web dryness was lower than this level. Wet webs should contain enough water to swell the starch granules, and at the same time they should be heated to a temperature high enough for complete cooking of the sprayed starches to occur. This suggested that preheating of the wet web can be employed to improve the plybond strength.

• Korean Journal of Food Science and Technology
• /
• v.44 no.5
• /
• pp.577-582
• /
• 2012

The purpose of this study was to investigate the preparation and physicochemical characteristics of n-octenylsuccinylated (OSAn) rice starches with different rice amylose contents. Amylose contents of Jinsumi flour and Milyang 261 flour were 15.42 and 20.31%, respectively. After processing by alkali treatment, amylose contents of Jinsumi rice starch and Milyang 261 rice starch were 34.21% and 39.32%, respectively. After OSAn treatment, the degree of substitution and reaction efficiency of Jinsumi starch were higher than those of Milyang 261. The stability of the modified Jinsumi emulsion was higher than that of the Milyang 261 emulsion. Viscosity of the Jinsumi emulsion was higher than that of the Milyang 261 emulsion. When the emulsions were spray dried, modified Jinsumi rice starch showed excellent coating efficiency compared to that of modified Milyang 261 rice starch. Therefore, Jinsumi was more suitable than Milyang 261 to apply for encapsulation as wall materials.

• Fibers and Polymers
• /
• v.6 no.2
• /
• pp.174-179
• /
• 2005

The present paper studies the effect of chitosan, cationic starch and polyvinyl alcohol (PVA) as sizing agents to enhance surface properties of kenaf paper. The polymers were incorporated into the sheets by spray application. The results clearly showed that the addition of chitosan to a sheet formed from beaten fibers had excellent improvement in surface properties, compared to the effect of other additives. Sizing quality of cationic starch fairly matched with the sizing quality of chitosan, however, it was able to reduce the water absorption potential of paper more than chitosan at a same concentration. In most other properties, particularly the most important property for printing papers, surface smoothness, chitosan-sized papers are superior to the paper sized with cationic starch or PVA.

• Journal of Microbiology and Biotechnology
• /
• v.24 no.2
• /
• pp.177-187
• /
• 2014

Microbial phytases are enzymes with biotechnological interest for the feed industry. In this article, the effect of spray-drying conditions on the stability and activity of extracellular phytase produced by R. microsporus var. microsporus biofilm is described. The phytase was spray-dried in the presence of starch, corn meal (> $150{\mu}m$), soy bean meal (SB), corn meal (< $150{\mu}m$) (CM), and maltodextrin as drying adjuvants. The residual enzyme activity after drying ranged from 10.7% to 60.4%, with SB and CM standing out as stabilizing agents. Water concentration and residual enzyme activity were determined in obtained powders as a function of the drying condition. When exposed to different pH values, the SB and CM products were stable, with residual activity above 50% in the pH range from 4.5 to 8.5 for 60 min. The use of CM as drying adjuvant promoted the best retention of enzymatic activity compared with SB. Spray drying of the R. microsporus var. microsporus phytase using different drying adjuvants showed interesting results, being quite feasible with regards their biotechnological applications, especially for poultry diets.

• Journal of Chitin and Chitosan
• /
• v.22 no.2
• /
• pp.110-117
• /
• 2017

This study was conducted to examine the physicochemical properties and hot air-dried and spray-dried powders process of sweet potato and steamed sweet potato. The moisture and the total starch contents were 1.66~2.19% and 52.65~57.42%, respectively. The total starch contents increased during process steaming. The water absorption index of the spray-dried powders (0.97 and 2.03) was lower than that of the hot air-dried powders (2.12 and 4.71), and the water solubility index of the spray-dried powders (83.83 and 86.95%) was higher than that of the hot air-dried powders (68.40 and 81.21%). The particle size and outer topology of the spray-dried powders were 46.18 and $65.53{\mu}m$, and its shape was generally globular. In the DSC analysis of this study, the $T_o$ of the spray-dried powders (64.40 and $67.80^{\circ}C$), $T_p$ of the spray-dried powders (74.40 and $78.20^{\circ}C$), and $T_c$ of the spray-dried powders (81.10 and $81.60^{\circ}C$) was higher than that of the hot air-dried powders. The solubility contents of the spray-dried powders (68.21 and 80.73%) was lower than that of the hot air-dried powders, and the swelling power contents of the spray-dried powders (14.79 and 15.35%) was higher than that of the hot air-dried powders. The amylose contents of spray-dried powders (11.67 and 12.51%) was lower than that of the hot air-dried powders. The soluble dietary fiber contents of spray-dried powders (1.34 and 2.02%) was higher than that of the hot air-dried powders.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.34 no.7
• /
• pp.1035-1040
• /
• 2005

This study was conducted to investigate the surface spraying effect of materials on the rheological properties of frozen starch with microwave heating. Microwave helps reduce cooking time by high temperature, but swiftly snatches moisture from foods such as frozen starches (buns and noodles etc) and makes surface of foods harder. Four types of maltodextrin materials have been prepared for different concentration solutions and sprayed on surface doughs of sheet type. Sprayed dough samples were Quickly frozen at $-70^{\circ}C$ and wrapped with polypropylene film. All the treated samples were kept at 0, -20 and $-50^{\circ}C$, and then taken out periodically for measurement of the quality during storage. The quality attributes evaluated after heating with microwave energy include sensory quality retrogradation, texture, surface color and microstructure. The quality of frozen starches deteriorated with long term storage even at low temperatures of -20 and $-50^{\circ}C$, and the spray materials were found to improve the textural and physical properties of frozen starches in the microwave heating. Particularly, maltodextrin with D.E value of $9\~12$ had the most desirable effects of quality improvement.

• Korean Journal of Food Science and Technology
• /
• v.41 no.1
• /
• pp.27-31
• /
• 2009

Top spray-drying method is frequently utilized for flavor encapsulation, but the top spray-dried products frequently suffer from high losses of volatile flavor as the result of a high processing temperature (150-$300^{\circ}C$). In an effort to solve these problems, a low-temperature fluidized-bed granulating method was utilized to encapsulate the flavor. For the encapsulation of sesame oil, oil-in-water emulsions of sesame oil and a mixture of maltodextrin, modified starch, gum arabic, and gellan gum were bottom-sprayed at milder temperatures (70-$100^{\circ}C$) using a fluidized-bed granulator. Sesame oil extracts from microcapsules were obtained via a simultaneous distillation/extraction technique, and the retention of volatile flavor compounds was analyzed via a gas chromatography-mass spectrometry. The retention of volatile flavors of sesame oil per se, spray-dried and fluidized-bed granulated microcapsules after 3-day-storage at $37^{\circ}C$ were 0.8%, 37.2%, and 42.0%, respectively. In addition, the low-temperature fluidized-bed granulation showed higher encapsulation yield and sensory preferences for the application of commercial products (beef rice porridge), as compared to spray drying.

• Food Science and Preservation
• /
• v.22 no.3
• /
• pp.392-398
• /
• 2015

The physicochemical properties of spray-dried rice flour with Lactobacillus plantarum CGKW3 were investigated. Amylose and damaged starch contents of spray-dried rice flour (S10, S20, S30, and S50) with L. plantarum CGKW3 were 14.18~17.75% and 24.65~34.08%, respectively. The particle size of spray-dried rice flour was $82.28{\sim}131.17{\mu}m$. The rice flour with L. plantarum CGKW3 showed a good powder flowability. The water absorption and water solubility of spray-dried rice flour were 1.96~2.13 and 9.91~21.95%, respectively. Thermal properties measured by differential scanning calorimeter revealed that the enthalpy (${\Delta}H$) for starch gelatinization were highest in the rice flour (S50) with L. plantarum CGKW3. When compared, the viable cell number of spray-dried rice flour were found to be in the following order: S10 (5.78 log CFU/g) < S20 (6.38 log CFU/g) < S30 (6.69 log CFU/g) < S50 (7.11 log CFU/g). The survaival rate of L. plantarum CGKW3 was 60.02-73.85%, which reflected the improvement in the quality of rice flour with an increase in treatment concentration. Based on our results, spray-dried rice flour with L. plantarum CGKW3 could be used in various types of rice foods.

• Journal of Sericultural and Entomological Science
• /
• v.39 no.1
• /
• pp.1-11
• /
• 1997

In relations to cold acclimation, experiment was carried out to understand the seasonal changes in reserve substances of the mulberry. The shoot barks and leaves of three mulberry varieties(Kaeryangppong, Shinilppong and Yongcheonppong) were sampled, after that their reserve substances were analyzed. The cold hardiness of mulberry was investigated by DTA(Differential Thermal Analysis) method. To increase cold hardiness, gibberellin(100 ppm), kinetin(100 ppm) and Jambi 8 were sprayed on the mulberry leaves. After spraying, falling of the leaves of Yongcheonppong occured earier than the other varities. After the first frost, all of treatments except gibberellin were entirely fallen. Growth regulator extended the leaves fallen. After spraying, water of the shoot barks was not showed difference in the content among the treatments, but amino acid, carbohydrate and soluble protein increased from September to October. Starch content of the shoot barks and leaves was maximum in October, but thereafter decreased during wintering stage. In Shinilppong, Jambi 8 spray increased cold hardiness by 1-2$^{\circ}C$ more than no spray. It was concluded that the cold hardiness of the mulberry in midwinter is closely related to the reserve substances with spraying Jambi 8 on the mulberry leaves.