• 한국식품영양과학회지
• /
• 제28권2호
• /
• pp.423-428
• /
• 1999

Potato starches were hydroxypropylated with 2.5, 5.0, 7.5, and 10.0% propylene oxide(PO) to improve mechanical properties of starch polyethylene film. Starch polyethylene cast films were prepared that contained 5% or 10% of the hydroxypropylated potato starch. Mechanical properties of these films were measured and compared to those of the films containing native potato starch. DS(degree of substitution) increased proportionally as propylene oxide concentration increased. Relative crystallinity in X ray diffraction patterns was decreased and starch granule observed by scanning electron micro scopy was destroyed by severe hydroxypropylation. In color properties of films, b value was not significantly different in the films but 5% starch polyethylene films with 2.5 PO starch showed the lowest L and a value. Tensile strength and strain energy of the films except the film containing 10.0 PO starch were higher than those of the containing native starch.

• 한국식품과학회지
• /
• 제32권6호
• /
• pp.1298-1305
• /
• 2000

0.1, 0.5, 1.0, 2.0% epichlorohydrin으로 가교결합시킨 감자 전분을 각각 5% 첨가한 polyethylene cast 필름을 제조하여 이들의 기계적 성질 및 열분해 특성, 생분해 특성을 분석하였다. Instron으로 측정한 필름의 기계적 성질에서는 가교결합 감자 전분으로 제조한 필름이 무처리 감자 전분으로 제조한 필름보다 인장강도, 신장율, 인장에너지 모두가 더 높게 나타나 필름의 기계적 강도가 향상되었음을 알 수 있었다. FT-IR과 Instron으로 측정한 필름의 열분해 특성에서는 가교결합 감자 전분으로 제조한 필름이 무처리 감자 전분으로 제조한 필름보다 빠르게 열분해됨이 확인되었다. 또한 필름의 생분해 특성에서도 가교결합 감자 전분으로 제조한 필름이 무처리 감자 전분으로 제조한 필름보다 생분해 정도가 더 뛰어난 것으로 나타났다.

• Preventive Nutrition and Food Science
• /
• 제6권2호
• /
• pp.112-116
• /
• 2001

Oxidized potato starch/polyethylene (PE) cast films were prepared with different percentages of linear low density PE (LLDPE), oxidized potato starch and prooxidant. For the determination of biodegradability of the films, lignocellulose-degrading Streptomyces viridosporus T7A (ATCC 39115) was used. Films were chemically disinfected and incubated with S. viridosporus by shaking at 100 rpm at 37$^{\circ}C$ for eight weeks. Hydroxyl indices of the films by Fourier-Transform Infrared Spectroscopy, mechanical Properties of the films by Instron and film morphology by scanning electron microscope (SEM) were measured. The hydroxyl index of the film containing the oxidized potato starch incubated with S. viridosporus T7A was higher than that of the corresponding control. All the films containing 5% and 10% oxidized starch showed a decrease of tensile strength on the films after incubation when the corresponding uninoculated film was compared. In the oxidized starch/PE film incubated with S. viridosporus T7A, partial destruction of starch and PE was examined by SEM.

• 산업식품공학
• /
• 제15권1호
• /
• pp.70-74
• /
• 2011

전분필름의 물성에 미치는 고압균질 처리의 영향을 검토한 결과, 고압균질처리 옥수수전분필름은 산화전분필름과 유사한 투명도를 가지며, 용해도와 산소투과억제력의 증가와 함께 인장강도가 다소 높아지는 것을 확인하였다. 이러한 고압균질처리 옥수수전분필름의 물성변화는 고압균질기의 고압과 전단력에 의해 호화전분입자가 완전히 소실되고 전분의 용해도 증가와 보다 균일한 분산상이 형성되기 때문으로 판단되었다. 일반적인 호화과정을 통해 형성되는 전분필름의 구조는 연속상의 아밀로오스에 팽윤된 접분입자가 분산되어 있는 network 형태에서 형성된다. 반면 고압균질처리의 경우, 호화전분입자의 붕괴로 아밀로펙틴이 연속상을 이루고 여기에 아밀로오스가 분산상으로 존재하는 새로운 분산계(dispersed system)가 형성되어, 기존 호화 방법으로 제조한 필름과 다른 물성을 나타내는 것으로 판단되었다.

• 공업화학
• /
• 제10권7호
• /
• pp.1008-1013
• /
• 1999

펙틴/전분 블렌드의 열가소성과 펙틴/전분 비와 가소제 함량이 블렌드의 기계적 물성과 형태에 미치는 영향을 조사하였다. 블렌드는 이축 압출기로 제조하였으며 시험용 필름은 슬릿 다이가 부착된 일축 압출기로 제조하였다. 대부분의 블렌드는 열가소성 성질을 가지고 있었으나, 펙틴/전분비가 아주 높은 블렌드는 열가소성 성질이 매우 약하였다. 필름의 인장 물성은 가소제인 글리세롤의 함량에는 크게 변화였으나 펙틴/전분 비의 변화에 대하여는 상대적으로 적게 변화하였다. 습조성 블렌드의 DSC 곡선은 $125^{\circ}C$에서 유리전이온도와 유사한 전이온도를 포함하고 있었다. 파단면의 전자현미경사진은 펙틴과 전분의 계면에서는 접착 현상이 좋다는 것을 보여주었다.

• Preventive Nutrition and Food Science
• /
• 제3권1호
• /
• pp.27-35
• /
• 1998

Starch-polyethylene films containing high molecular weight(NW) oxidized-polyethylene and prooxidant were prepared , and thermal -and bio-degradability of the films were determined. Increased levels of starch resulted in a corresponding reduction in mechanical strength of the films. However, the addition of high MW oxidized-polyethylene did not significantly reduce the percent elongation of the films. Thefilms containing high MW oxidized-polyethylene andproosicant were degreaded faster than those containing no aadditive during the heat treatment. The films lost their measureable mechanical properties when their weight-average MW(Mw) fell below 50,000. Biodegradability of the films was determined by a pure culture assay with either Streptomyces badius 252.S. setonii 75Vi2 or S. viridosporous T7A, and by an extracellulr enzyme assay using S. setonii 75vi2. The results from pure culture assay indicated that biomass accumulation on the film surface inhibited chemical and biological degradation of the films. The extracellular enzyme assay demonstrated decrease of percent elongation and increase of carbonyl index of the films. Therefore, extracellular enzyme assay could be used as a good method to evaluate biodegradability of the films.

• 한국환경과학회지
• /
• 제14권3호
• /
• pp.359-366
• /
• 2005

Starch was crosslinked with epichlorohydrin. Crosslinked starch-filled waterborne acrylate (CSWAC) films were prepared by blending this crosslinked starch with waterborne acrylate. The thermal and mechanical properties of these films were investigated by thermogravimetric analysis (TGA), tensile strength and elongation test. The biodegradability was also studied by determination of reduced sugar products after enzymatic hydrolysis and the surface morphology was investigated by scanning electron microscopy (SEM). The CSW AC film showed significantly higher tensile strength and elongation than those of starch-filled waterbonre acrylate (SWAC). The biodegradability of this film was higher than that of native starch-filled acrylate film, and was increased by the addition of crosslinked starch to the acrylate film.

• 한국환경과학회지
• /
• 제13권12호
• /
• pp.1131-1138
• /
• 2004

The starch-filled waterborne acrylate (SWAC) films were prepared. The structures and properties of SWAC films were investigated by infrared spectroscopy, thermogravimetric analysis, and strength test. The biode­gradability of SWAC film was also studied by determination of reduced sugar products after enzymatic hydrolysis. The surface morphology of the SWAC film was investigated by scanning electron microscopy (SEM). The results showed that the tensile strength and elongation of SWAC film decreased with the increase of starch content. The SWAC film showed significantly higher water absorbed content than waterbonre acrylate film. The biodegradability of SWAC film increased as the content of starch increased. The biodegradation of starch in SWAC film by ${\alpha}-amylase\;was\;about\;77{\%}$ of that of pure starch.

• Journal of Industrial and Engineering Chemistry
• /
• 제68권
• /
• pp.57-68
• /
• 2018

The main objective of this study is to prepare the bionanocomposite films using mungbean starch (MBS), PVA, ZnS, and plasticizers, and to evaluate the physical properties, thermal stability, and photocatalytic activity. The bionanocomposite films were cross-linked by heat-curing process. The ZnS and bionanocomposite films were characterized by FT-IR, XRD, and SEM. The results indicated that the mechanical properties and water resistance enhanced up to 1.2-1.5 times by the addition of nano-ZnS particles, and the thermal stability was improved by the addition of nano-ZnS particles. The photocatalytic activity of the bionanocomposite films added nano-ZnS particles was examined using bisphenol A (BPA) and methyl orange (MO). In addition, the photodegradation efficiency of BPA and MO was evaluated using the pseudo-first order kinetic model (PFOK).

• Food Science and Biotechnology
• /
• 제14권1호
• /
• pp.68-72
• /
• 2005

Moisture sorption characteristics of edible composite films were determined and compared against moisture barrier properties. Edible composite films were Z1 (zein film with polyethylene glycol(PEG) and glycerol), Z2 (zein film with oleic acid), ZA1 (zein-coated high amylose corn starch film with PEG and glycerol), and ZA2 (zein-coated high amylose corn starch film with oleic acid). Z2 film showed the lowest equilibrium moisture content (EMC), monolayer value ($W_m$), water vapor permeability (WVP), and water solubility (WS). Surface structure of Z2 was relatively denser and finer than that of other edible films. GAB $W_m$ and C values decreased, while K values increased with increasing temperature. Correlation coefficients of WS:EMC and WVP:EMC at Aw 0.75 were higher than those of WS: $W_m$ and WVP: $W_m$, respectively. EMC values at Aw 0.75 appeared useful for evaluating or predicting moisture barrier properties of edible films.