• 대한핵의학회지
• /
• 제15권1호
• /
• pp.13-20
• /
• 1981

Using stannous chloride, optimum conditions for $^{99m}Tc$ labelling of some scanning agents such as phytic acid (P A), dimercaptosuccinic acid (DMSA), and calcium diethylenetriaminepentaacetate (Ca-DPTA) were established. Methods of separation and identification of the labelled compounds were practiced by a paper- or thin layer- chromatography. Biodynamic studies of the compounds were also carried out. The results indicate that the molar ratios of the chelating agent and stannous chloride varies only with the concentrations of the chelating agents, and thus the amounts of the stannous chloride per labelling tube were nearly constant $(500\sim600{\mu}g)$ regardless the variation of the molar ratios. It suggests that the given experimental conditions require about $500{\mu}g$ of stannous chloride regardless of the chelating agents. Under alkaline pH, the labelling yields were drastically decreased due to the probable formation of colloidal tin compounds. Biodynamic data showed characteristic patterns with each compound indicating that they are all suitable for the relevant scanning applications.

• 대한소아치과학회지
• /
• 제23권2호
• /
• pp.477-488
• /
• 1996

The purposes of this study were to measure the solubility of the stannous fluoride experimentally, to find a method for improving the solubility of the stannous fluoride, and to observe the effect of longterm storage on the variation of the concentration of fluoride in the stannous fluoride solutions. By adding such materials as antiseptics, dye, flavor, and tastes to solution, the variation of the fluoride concentration was also observed. Ten groups of 0.4% stannous fluoride solutions to which glycerine, sodium chloride, chlorhexidine, dye, flavor, xylitol, and sorbitol were added were prepared. The measurements were carried out by direct calibration. The obtained results were as follows. 1. Effect of adding glycerine as solvent. : The solubility of stannous fluoride increased in the case of adding glycerine. By increasing the glycerine concentration, the fluoride level in stannous fluoride solution also increased. 2. Effect of adding sodium chloride and chlorhexidine. : Comparing to the case of pure water, low fluoride level was measured in case of adding sodium chloride and high fluoride level was measured in case of adding chlorhexidine. 3. Effect of adding erythrosin as dye and banna essence as flavor. : Adding erythrosin and banna essence didn't affect fluoride level. 4. Effect of adding xylitol and sorbitol. : The effects of xylitol and sorbitol were nearly the same as the effect of adding erythrosin and banna essence.

• 대한핵의학회지
• /
• 제26권1호
• /
• pp.140-146
• /
• 1992

$^{99m}Tc-Methionine$ complexes from enantiomeric and racemic methionines were prepared controlling reaction parameters such as pH and the concentration of stannous chloride. Some radiochromato-graphic systems were also examined to determine the labelling yields of $^{99m}Tc$ complexes. The best resolutions of $^{99m}Tc$ complexes were obtained at ITLC-SA developed with acetone and paper chromatography with n-butanol saturated with 0.3N HCI. In the former system, $HR-{99m}Tc$ and $^{99m}Tc-methionine$ complex remained at origin, while $^{99m}TcO_4^-$ moved with Rf value of 1.0. In latter process, $HR-^{99m}Tc$ stayed at the origin, while $^{99m}TcO_4^-\;and\;^{99m}Tc-methionine$ complexes moved with Rf value of 0.5. By combining of two chromatographic systems, the contents of three $^{99m}Tc$ species were calculated easily. $^{99m}Tc$ Labelling from enantiomeric and racemic methionines had little differences and the optimal condition was found at pH 9.00 and the molar ratio of methionine to stannous chloride of 24:1. The yields of $^{99m}Tc$ complexes from D-, L-, and DL-methionines were 87.6%, 94.1%, and 97.9%, respectively. The results indicated that methionine containing relatively hydrophobic methylthio group $(-SCH_3)$ would be labelled with $^{99m}Tc$ by stannous chloride method.

• 대한가정학회지
• /
• 제25권3호
• /
• pp.1-13
• /
• 1987

In this study, I have tested the effects of the agents and dyeing conditions on the Brazil-wood dyestuff as one plant dyestuffs. According to the tests, I have fount that color differenciation depending opon the agents and procedual condtitions. As the agents, Alm induced redness and light yellowness by Aluminum Acetate, dark greenness or blueness by Ferrous chloride, dark redness by Stannous Chloride, dark grenness or blueness by Copperous Chloride, light yellowness or greenness by Calcium Dihydroxide. On the other hand, color-fastness differed from various mordant agents. The color-fastnes was solid using multiple agents than sole agent.

• 대한방사선기술학회지:방사선기술과학
• /
• 제30권3호
• /
• pp.259-263
• /
• 2007

본 연구는 $^{99m}Tc$과 방사성 의약품인 적혈구(Erythrocyte)의 표지를 이용하여 신속한 핵의학적 검사를 시행해야 하는 환자들에게 표지효율 저하를 방지하여 영상의 정보를 더욱 정확하게 분석할 수 있도록 하기 위해 변형 체외 표지법을 이용한 방법에서 Stannous chloride($SnCl_2$) 양, 표지시간, 적혈구 농도, 헤모글로빈(Hb) 수치에 따른 변화를 비교하여 분석하였다. 간혈관종 검사와 위장관출혈 검사를 시행한 전체 55명의 환자 중 정상으로 판명된 15명은 정상군, 이상소견으로 판명된 40명은 환자군으로 분리한 후, 환자군 중 적혈구 농도가 정상보다 낮은 환자와 헤모글로빈이 낮은 환자들의 표지시간 변화에 따른 표지효율을 측정하였다. 그 결과 정상인의 경우 Tin의 양이나 표지시간이 표지효율에 미치는 영향은 거의 없는 것으로 나타났으나 환자의 경우에는 표지시간(Incubation time)이 30분보다 60분이 표지효율이 높게 측정되었다. 따라서 적혈구 농도, 헤모글로빈수치, 헤마토크리트 수치가 낮은 환자를 검사할 때 표지시간을 30분보다는 60분에서 시행하여 표지효율을 높여 보다 정확하고 좋은 영상정보를 얻을 수 있을 것이다.

• Nuclear Engineering and Technology
• /
• 제12권1호
• /
• pp.19-28
• /
• 1980

파이로포스페이트의 $^{99m}$ Tc즉석표지 방법에 관하여 연구하였다. pH 3.5-5.5에서 냉동건조 상태의 파이로포스 페이트와 SnCl$_2$ 혼합물에 $Na^{99m}$ TcO$_4$ 용액을 가하여 녹임으로써 대략 90%의 표지수율을 얻었다. 표지생성물의 순도와 수율은 85% 메탄올과 0.85% NaCl 용액을 전개용매로하는 2차원 종이 크로마토그래피로 검토하는 한편 생쥐를 실험동물로 하여 생성착물의 생체내 분포 실험도 실시 하였다. 일반적으로 $^{99m}$ Tc (VII)의 환원제인 SnCl$_2$를 적은량 쓸수록 표지 수율이 좋았으며 파이로포스페이트와 SnCl$_2$의몰 비율은 10 : 1~50 : 1로 충분하였다. 환원된 미결합 $^{99m}$ Tc의 양이 많은 생성물을 생쥐체내에투여 할수록 간에 집적되는 방사능 양치 증가하는 것으로 보아 골격조영술에서 잘못된 영상을 얻게되는 원인은 환원된 미결합 $^{99m}$ Tc가 콜로이드 상태의 산화된 Sn 생성물에 흡착되어 일어 나는 것으로 생각되었다. 생성착물의 뼈와 간에 대한 분포비율은 투여후 60분 정도에서 최고 35 : 1이었으며, 파이로젠 시험결과도 양호함으로 생성착물은 골격질환의 연구나 진단목적에 적합함을 알수 있었다.

• 대한핵의학회지
• /
• 제28권2호
• /
• pp.167-171
• /
• 1994

Ethylcystein dimer (ECD) was synthesized by dimerizatlon of L-thiazolidine-4-carboxylic acid in liquid ammania with sodium metal and successive esterification in ethanolic solution of hydrogen chlorde. The purified product was labeled with $^{99m}Tc$ in the presence of sodium glucarate(pH= 5.6) and stannous chloride. Best result was obtained from the preparation con sisting of 0.1mg ECD, $40{\mu}l$ of 0.4M sodium glucarate (pH=5.6), and $20{\mu}g$ of stannous chloride. The labeling efficiency was 90% with previous condition. The labeled $^{99m}Tc$-ECD was stable at least for 3 hours in PBS(pH=7.4) at room temperature. About 10mCi of $^{99m}Tc$-ECD was injected to normal volunteer, and SPECT image of brain was obtained by triple head camera 10 minutes after inection. The image showed similar distribution of radioactivity in brain with that of HMPAO image.

• 대한화학회지
• /
• 제4권1호
• /
• pp.51-57
• /
• 1957

Hydroquinone-formaldehyde resin prepared from hydroquinone, formaldehyde and hydrochloric acid as a catalyst was shown to be oxidized with ferric chloride solution and regenerated by stannous chloride solution. The influence of various conditions of preparation on the capacity of oxidation was studied. Results show that the concentration of a solution of hydroquinone has not any effects below 14 parts of water to 1 part of hydroquinone, by the after-heat-treatment for 5-6 hours at 100-120 deg. C. the capacity of oxidation is exhibited a maximum, and decreased as the mole ratio of hydroquinone to formaldehyde increase. The optimum conditions for the preparation of this resin are as follows: hydroquinone 1 part to distilled water 10 parts, mole ratio of formaldehyde 1.2 to hydroquinone 1, and 5 hours of after-heat-treatment at 120 deg. C. The maximum capacity under the above conditions is 13.99 meq/g-ersin.

• 한국잠사곤충학회지
• /
• 제39권1호
• /
• pp.56-61
• /
• 1997

The silk fibroin solution was prepared and applied to the surface of fabrics for the purpose of weighting as well as a surface modification. The water-soluble fibroin solution can be obtained by dissolving the cocoon fibroin in a boiling solution of 50% calcium chloride for 60 minutes. For the fixation of a water soluble fibroin onto the fabric surface, the various methods were investigated. The fixation can be achieved on a silk fabric by the after treatment with ethanol, stannous choride and methacrylamide. On the other hand, the epichlorhydrin compound is the most promising fixation agent for a cotton fabric. As a result of the examination of property changes, the softness and crease recovery were lessened for a silk crepe fabric by treating with 1-2% fibroin solution, while those properties were improved for a silk knit fabric.

• 대한화학회지
• /
• 제8권3호
• /
• pp.113-120
• /
• 1964

첫째로 微量燐酸鹽의 定量法으로서 燐몰르브덴酸의 醋酸부틸抽出一鹽化第一주석還元法에 依한 몰리브덴靑法을 더욱 檢討하여 2~8 ${\mu}g$의 燐을 몰리브덴酸 암모늄 및 過鹽素酸濃度 0.5∼1.1%, 0.5~1.1N에서 縮合시켜 溶媒 10ml로 抽出하여 이것을 1.3%鹽化第一주석의 1N鹽酸溶液 5.0ml로 還元시키면 吸光度로서 標準假差 2 ${\times}\;10^{-3}$의 精密度로써 安定한 皇色을 얻을 수 있다. 試料量을 많이 取하면 0.1p.p.m. 以下의 燐酸鹽-燐도 相對誤差 5% 以內에서 容易하게 定量할 수 있다. 다음에 極微量의 燐酸鹽 定量法으로서 몰리부덴(V)-티오시안酸錯鹽發色法을 利用하여 0.3∼1.2${\mu}g$의 燐을 위의 方法에 따라 抽出하여 燐몰리브덴酸 內의 몰리브덴을 溶媒內에서 바로 4.3∼6.3 N 鹽酸 또는 9.0 ∼ 13.0 N 硫酸에서 銅 및 過鹽素酸濃度 0.5~1.5 mM, 0.1∼0.9 N 共存下에서 鹽化第一주석濃度 4∼10% 되도록 하여 1分間加熱還元시켜 6.0M 티오시안酸암모늄을 加해 0.4∼0.9M 되도록 하면 直時 銳敏하고 大端히 安定한 皇色을 얻을 수 있어 1cm셀로써도 天然水中의 燐酸鹽 같은 極微量도 容易하게 定量할 수 있다. 本法의 精密度는 吸光度로서 標準偏差가 1.6 ${\times}\;10^{-2}$며 試料量을 많이 取하면 0.02p.p.m. 以下 0001p.p.m. 까지의 燐酸鹽-燐도 5%以內의 相對誤差로써 選擇的으로 定量할 수 있다.