• Transactions of the Korean Society of Automotive Engineers
• /
• v.15 no.6
• /
• pp.94-101
• /
• 2007

This paper, we analyzed that the measured data of the radiated power spectrum of electromagnetic waves and the standing wave ratio(SWR) of the spark plug cable and spark plug. The measured data are the power strength of the electromagnetic waves radiated from the spark ignition system, the measured frequency ranges are 110 to 610MHz. The results show that the strength of radiated power spectrum and bandwidth have relation to the SWR of the the spark plug cable and spark plug, and the SWR of them is different because of the characteristics of resistor at the spark plug is different with the manufacturers. From the analyzed results, it can be concluded that the less SWR is little, the less maximum level of power spectrum is weak and bandwidth above the reference level is small.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.18 no.4
• /
• pp.43-49
• /
• 2014

This experimental study has been conducted to scrutinize the effects of an ultrasonic standing wave (USW) on the propagating velocity and structure of methane/air premixed flame. Propagating flame was caught by high-speed Schlieren photography, and the variation of flame-behavior was analyzed in detail. It is revealed that horizontal splitting in burnt zone is resulted by the USW, and the flame propagation velocity is augmented due to the strengthened chemical reaction. Evolutionary feature of the flame perturbed by USW, maintaining a pseudo-symmetry of top and bottom flame-front about the propagation axis tends to be free from buoyancy effect.

• Korean Chemical Engineering Research
• /
• v.43 no.3
• /
• pp.360-365
• /
• 2005

SMB (simulated moving bed) is a continuous chromatographic process by shifting periodically port position. Binary of mixture, Blue dextran and Orange G, was separated by SMB. These components have unique color individually, that is, Blue dextran is blue and Orange G is orange. It is easy to understand SMB process by observing the shift of color changes in SMB. These components was not adsorbed to stationary phase and isolated by difference of size exclusion factor. Mass transfer coefficient was determined by single pulse test under several flow rate conditions. Operation condition was obtained by standing wave theory and optimized for high purities in extract and raffinate streams. Experiment was performed in open loop 4 zone (2-2-2-2) SMB. There are several advantages in open loop SMB, where extract is product for high purity. It is also easy to control flow rate and monitor experimental state during operation. Experimental, extract and raffinate history is well fitted with simulation results, however, column concentration profile is a little different from simulation results. Purities were 99.5％ for extract and 98.9％ for raffinate and extract and raffinate yields were obtained as 98.9％ and 99.4％ respectively.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.13 no.4
• /
• pp.280-285
• /
• 2000

The conventional ultrasonic linear motors developed so far utilize a standing wave and are of a pi-type or a hybrid transducer type structure. Traveling wave type bi-direction linear motors have not been developed yet. This paper describes design of a new bi-directional ultrasonic linear motor working by means of a traveling wave. With the finite element method we design and verify validity of the new structure. And we determine its optimal structure size of design variables material and boundary conditions for proper generation of the traveling wave.

• Journal of Magnetics
• /
• v.5 no.3
• /
• pp.76-80
• /
• 2000

Soft x-ray standing waves produced by a multilayer interference substrate add depth-sensitivity to magnetic circular dichroism to resolve changes in Co magnetism across a 10${\AA}$ distance from the Co center to the Co-Pd interface of a Pd/Co/Pd trilayer having in-plane magnetization. Large enhancements of in-plane orbital and spin magnetic moments, as well as the number of d holes, are strongly localized in a thin interface layer. These results provide new insight into the phenomenon of magnetic anisotropy at buried interfaces, and suggest a broad applicability of such standing wave measurements to interface magnetism studies.

• Journal of Integrative Natural Science
• /
• v.7 no.4
• /
• pp.221-226
• /
• 2014

Optically encoded porous silicon smart particles were successfully fabricated from the free-standing porous silicon thin films using ultrasono-method. DBR PSi was prepared by an electrochemical etch of heavily doped $p^{{+}{+}}$-type silicon wafer. DBR PSi was prepared by using a periodic pseudo-square wave current. The surface-modified DBR PSi was prepared by either thermal oxidation or thermal hydrosilylation. Free-standing DBR PSi films were generated by lift-off from the silicon wafer substrate using an electropolishing current. Free-standing DBR PSi films were ultrasonicated to create DBR-structured porous smart particles. Optical characteristics of porous smart particles were measured by FT-IR spectroscopy. The surface morphology of porous smart particles was determined by FE-SEM.

• Proceedings of the Korean Magnestics Society Conference
• /
• 2000.09a
• /
• pp.207-216
• /
• 2000

Soft x-ray standing waves produced by a multilayer interference substrate add depth-sensitivity to magnetic circular dichroism to resolve changes in Co magnetism across a 10 ${\AA}$ distance from the Co center to the Co-Pd interface of a Pd/Co/Pd trilayer having in-plane magnetization. Large enhancements of in-plane orbital and spin magnetic moments, as well as the number of d holes, are strongly localized in thin interface layer. These results provide new insight into the phenomenon of magnetic anisotropy at buried interfaces, and suggest a broad applicability of such standing wave measurements to interface magnetism studies.

• Journal of Integrative Natural Science
• /
• v.4 no.1
• /
• pp.11-14
• /
• 2011

Free-standing multilayer distributed Bragg reflectors (DBR) porous silicon dielectric mirrors, prepared by electrochemical etching of crystalline silicon using square wave currents are treated with polymethylmethacrylate (PMMA) to produce flexible, stable composite materials in which the porous silicon matrix is covered with caffeine-impregnated PMMA. Optically encoded free-standing DBR PSi dielectric mirrors retain the optical reflectivity. Optical characteristics of free-standing DBR PSi dielectric mirrors are stable and robust for 24 hrs in a pH 12 aqueous buffer solution. The appearance of caffeine and change of DBR peak were simultaneously measured by UV-vis spectrometer and Ocean optics 2000 spectrometer, respectively.

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.17 no.4
• /
• pp.213-220
• /
• 2005

An approach to calculate expected sliding distance of wave dissipating caisson breakwater is proposed. Time history of dynamic wave pressure for the calculation of sliding distance is made by extending conventional static wave pressure developed for the wave dissipating caisson breakwater. Construction of impact wave and standing wave was done by using duration time and maximum wave pressures of themselves. In the numerical analysis, the sliding distance for an attack of single wave and expected sliding distance for 50 years of wave dissipating breakwater by proposed method were compared with those by conventional method for uplift caisson breakwater. It was found that the sliding distance of wave dissipating breakwater by the proposed method is smaller than by conventional method.

• Journal of the Korean Institute of Navigation
• /
• v.25 no.4
• /
• pp.423-433
• /
• 2001

As a part of the development program of Ulsan Port, construction of detached breakwater is planned. In Ulsan Port, several oil-buoys exist. If the detached breakwaters have been constructed, these oil-buoys will be located within 1 km from the planned breakwaters. Construction of the breakwaters gives rise to changes of wave conditions on the sea areas, especially in front of the breakwater and it affects mooring of tankers, which supply oil to the oil-buoy In this study, in order to calculate standing wave distribution after construction of a breakwater, numerical model is proposed based on unsteady mild slope equation. Calculation is performed by testing different wave heights, directions and reflection coefficients of breakwater. In addition, the influence to working condition of tanker moored at the oil-buoy is evaluated by using measured wave conditions and calculated results.