• Computers and Concrete
• /
• v.14 no.2
• /
• pp.145-161
• /
• 2014

The article presents the statistical method of grouping the results of the compressive strength of concrete in continuous production. It describes the method of dividing the series of compressive strength results into batches of statistically stable strength parameters at specific time intervals, based on the standardized concept of "concrete family". The article presents the examples of calculations made for two series of concrete strength results, from which sets of decreased strength parameters were separated. When assessing the quality of concrete elements and concrete road surfaces, the principal issue is the control of the compressive strength parameters of concrete. Large quantities of concrete mix manufactured in a continuous way should be subject to continuous control. Standardized approach to assessing the concrete strength proves to be insufficient because it does not allow for the detection of subsets of the decreased strength results, which in turn makes it impossible to make adjustments to the concrete manufacturing process and to identify particular product or area on site with decreased concrete strength. In this article two independent methods of grouping the test results of concrete with statistically stable strength parameters were proposed, involving verification of statistical hypothesis based on statistical tests: Student's t-test and Mann - Whitney - U test.

• Journal of the Korean Society for Advanced Composite Structures
• /
• v.6 no.2
• /
• pp.77-84
• /
• 2015

The purpose of this study was the analytical safety evaluation on the super-structure of precast modular bridge using standardized modular members and robotic construction during the transportation routing and lifting conditions. In order to evaluate the safety performance of the bridge system, 3-D full scale Finite Element (FE) of 40 m standardized modular block was developed in ABAQUS, followed by the analytical study to classify the structural system according to steel girder structures: 1) modular bridge block lifting method including the steel girder system; 2) modular bridge block lifting method without the steel girder system. The results from the analytical study revealed that the maximum stress of each modular member was within the maximum allowable stresses during lifting condition. However, the stress concentration at the connected area was more critical in comparison to the behavior of 40 m combined modular blocks during lifting time

• Journal of the Korean Society of Safety
• /
• v.31 no.2
• /
• pp.41-48
• /
• 2016

Recently, the frequency and intensity of localized heavy rain and typhoon due to the abnormal climate has increased, and especially the damage by an avalanche of earth and rocks similar to the landslide of Umyeon Mountain has become a social issue. However, the standardized damage investigation method doesn't yet exist, so the systematic analysis of the data has not been carried out. In this regard, this study developed assessment items to conduct standardized damage investigation of debris flow. To achieve this, preliminary assessment items were derived from analysis of literature review and the Delphi technique of 12 experts who are engaged in research facility, academia and industry was conducted. As a result, 29 assessment items which can be classified into 6 groups were determined. Surveying the relevant hand-on workers, details assessment items in each group were determined by exploratory factor analysis and reliability analysis.

• Journal of Aerospace System Engineering
• /
• v.9 no.2
• /
• pp.51-56
• /
• 2015

In the vibration test, Most of the test specifications is standardized methods of sinusoidal excitation. However, in accordance with the ability of the test equipment progress and developments of electronic technology, methods of random vibration test is standardized in the MIL standard. Therefore, in this study, we tried to analyze Missile Guidance Structure using a finite element analysis with ABAQUS 6.13 that is commercial program. First, Random response analysis is analyzed. Following analyzing the results, we wanted to find the model that is lightweight and resonance does not occur.

• Journal of Korean Public Health Nursing
• /
• v.27 no.1
• /
• pp.40-49
• /
• 2013

Purpose: To describe nursing students' perceptions of their experiences on the home visiting simulation in community health nursing practicum. Methods: Descriptive survey method was used to evaluate students' experiences from the home visiting simulation. Results: The simulation was divided into three sections: orientation, facilitating the scenario and debriefing. The orientation was held for fifteen minutes, and four sessions of the simulation were implemented for 180 minutes. Sixty-one nursing students participated (91.8% female) and the mean age was $21.4{\pm}2.4$ years. No one had prior simulation experiences. Participants experienced reflective thinking during the scenario implementation and debriefing session. They perceived the home visiting simulation as an active learning and realistic training environment. However, participants expressed difficulties in focusing on the simulation when their peers played a patient role. In addition, peer patient role-players expressed the role burden. Conclusion: The home visiting simulation is a feasible and effective method for attaining goals a community health nursing clinical course for students. It can be used as a part of an orientation before the clinical rotation or as an evaluation after the clinical rotation. To provide a realism, we recommend using standardized patients. And further research on the effects of using standardized patients is recommended.

• Journal of Physiology & Pathology in Korean Medicine
• /
• v.32 no.1
• /
• pp.51-61
• /
• 2018

This study aims to evaluate the student's satisfaction of clinical performance examination(CPX) and self-assessment in Korean medical curriculum. A questionnaire was given to clinical clerkship students of Pusan National University School of Korean medicine in this study. The items in this questionnaire covered overall evaluation of guidelines, module & learning environment, standardized patients, and self-assessment in CPX. Most of all students recognized CPX as a more effective learning method than any other method. Most students were satisfied with the module & learning environment, standardized patients, and self-assessment except the satisfaction for guidelines relationally. The results of this study demonstrated that the students had a high level of satisfaction in CPX. This study shows that CPX has been implemented into the Korean medical curriculum.

• Textile Coloration and Finishing
• /
• v.20 no.1
• /
• pp.1-7
• /
• 2008

The study has attempted to introduce a new coating than the conventional standardized method of spray, padding and roll coating. The study has focused on finding condition for separating water and organic layer in marble bath and surface effects according to kind of raw hide. It was found that dyestuff-free was to be used in water layer and the input amount of initial insoluble pigment to be added in marble bath should be adjusted following the change of surface area of the marble bath in order to get efficient marble effect while preventing coagulation of water and organic layers. Eventually, amorphous high value-added leather could be obtained treated in process other than the conventional standardized method. Even raw hides of low grades($C{\sim}E$ grades) could be processed into amorphous marble effect that could conceal or shield surface scratches by the colorant, which eventually eliminated necessity of using excessive amount of chemicals in the coating process leading to achieving high quality marble leather of natural look.

• International journal of advanced smart convergence
• /
• v.7 no.3
• /
• pp.73-78
• /
• 2018

This study focuses on presenting the IT program module provided by BKLS measure in order to solve the problem of capital cost due to information asymmetry of external investors and corporate executives. Barron at al(1998) set up a BKLS measure to guide the market by intermediate analysts. The BKLS measure was measured by using the changes in the analyst forecast dispersion and analyst mean forecast error squared. This study suggests a model of the algorithm that the BKLS measure can be provided to all investors immediately by IT program in order to deliver the meaningful value in the domestic capital market as measured. This is a method of generating and analyzing real-time or non-real-time prediction models by transferring the predicted estimates delivered to the Big Data Log Analysis System through the statistical DB to the statistical forecasting engine. Because BKLS measure is not carried out in a concrete method, it is practically very difficult to estimate the BKLS measure. It is expected that the BKLS measure of Barron at al(1998) introduced in this study and the model of IT module provided in real time will be the starting point for the follow-up study for the introduction and realization of IT technology in the future.

• Journal of Convergence for Information Technology
• /
• v.7 no.5
• /
• pp.111-116
• /
• 2017

In this paper, we propose a method to measure the complexity of assets when a software component is constructed as a basic asset, a standardized design model is acquired, and a reusable extended asset is designed based on the standardized design model. However, each asset of our proposed asset management system consists of composite assets that combine assets of two domains. So this method can not make accurate measurements. Therefore, the complexity of the overall asset can be measured by reflecting the property value of the basic asset stored under the architecture. In conclusion, it is possible to measure the composite-complexity of a composed asset that is inversely proportional to cohesion and proportional to the cumulative sum of the associated values of each asset in the asset-related design.

• Journal of the Architectural Institute of Korea Planning & Design
• /
• v.35 no.5
• /
• pp.21-30
• /
• 2019

The purpose of this study is to present the direction of the new space plan by reflecting the opinions of the user (student) in the existing standardized elementary school space planning. The purpose of this study is to investigate the activities of elementary school students by using socio - spatial network analysis method and to propose the direction of new elementary school space planning through the results. We analyzed the results of each centrality by using the analysis of closeness analysis, betweeness analysis, girvan-newman clustering, and concor analysis. The results of this study are as follows. First, it should be planned to use the classroom and the special room as one area by utilizing the corridor. Second, it should be planned that the outdoor space and the indoor space are closely related to each other by utilizing the hall, the lobby and the classroom. Third, the school should create a small space where physical activity is possible in an indoor space of the school. In order to improve the standardized elementary school space, this study proposes a method to reflect the opinions of the users in the school planning stage.