• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.25 no.6
• /
• pp.757-765
• /
• 2021

To carry out multi-domain operations included in the U.S. Department of Defense's national security strategy in 2018, timely data sharing between C4I systems is critical. Several studies of the Korean military have also raised the problems of interface and standardization between C4I systems, and it is necessary to establish a new plan to solve this problem. In this study, a solution to the problem was derived through case analysis that the U.S. Department of Defense has been pursuing for about 20 years to implement the data strategy after establishing the data strategy in 2003. and by establishing a data strategy suitable for the ROK military C4I system operating environment, developing a data model, selecting a standard for data sharing, and proposing a shared data development procedure, we intend to improve the data sharing capability between ROK military C4I systems.

• Journal of the Korea Institute of Information Security & Cryptology
• /
• v.14 no.4
• /
• pp.3-11
• /
• 2004

The XML has been becoming a basis of the related application and industry standards with proliferation of electronic transactions on the web, and the standardization on XML Signature, which can be applied to the digital contents including XML objects from one or more sources, is in the progress through a joint effort of W3C(World Wide Web Consortium) and IETF(Internet Engineering Task Force). Along with this trend, the development of products implementing XML Signature has been growing, and the XML Signature products are required to implement the relevant standards correctly to guarantee the interoperability among different XML Signature products. In this paper, we propose a conformance testing method for testing the XML Signature products, which includes a testing procedure and test cases. The test cases were obtained through analysis of XML Signature standards. Finally we describe the design and uses of our XML Signature conformance testing tools which implements our testing method.

• Journal of Dental Anesthesia and Pain Medicine
• /
• v.21 no.6
• /
• pp.527-545
• /
• 2021

The aim of this systematic review was to determine the success rate of nitrous oxide-oxygen procedural sedation (NOIS) in dentistry. A systematic digital search was conducted for publications or reports of randomized controlled trials evaluating the clinical performance of NOIS. Abstracts of research papers were screened for suitability, and full-text articles were obtained for those who met the inclusion and exclusion criteria accordingly. The quality of the studies was assessed using the revised Cochrane risk-of-bias tool (RoB 2). A total of 19 articles (eight randomized clinical trials with parallel intervention groups and 11 crossover trials), published between May 1988 and August 2019, were finally selected for this review. The studies followed 1293 patients reporting NOIS success rates, with a cumulative mean value of 94.9% (95% CI: 88.8-98.9%). Thirteen trials were conducted on pediatric populations (1098 patients), and the remaining six were conducted on adults (195 patients), with cumulative efficacy rates of 91.9% (95% CI: 82.5-98.1%) and 99.9% (95% CI: 97.7-100.0%), respectively. The difference was statistically significant (P = 0.002). Completion of treatment and Section IV of the Houpt scale were the most used efficacy criteria. Within the limitations of this systematic review, the present study provides important information on the efficacy rate of NOIS. However, further well-designed and well-documented clinical trials are required and there is a need to develop guidelines for standardization of criteria and definition of success in procedural sedation. Currently, completion of treatment is the most used parameter in clinical practice, though many others also do exist at the same time. To maximize NOIS efficacy, clinicians should strictly consider appropriate indications for the procedure.

• Journal of Audiology & Otology
• /
• v.24 no.2
• /
• pp.85-90
• /
• 2020

Background and Objectives: The present study aimed to compare thresholds of direct bone-conduction (BC direct) with those of behaviorally measured BC pure-tone audiometry (PTA) and objectively measured BC auditory brainstem response (ABR) to confirm the clinical feasibility of their relationships. Subjects and Methods: Young adults with normal hearing participated in the study to determine the thresholds from three measurements at four testing frequencies. In the BC direct, the vibrator of a bone-anchored hearing aid softband was placed on the right mastoid of each subject. In both PTA and ABR, a B71 bone oscillator was placed on the subject's right mastoid. While the subject's thresholds of BC direct and BC PTA were determined with a clinically routine 5-dB step procedure, BC ABR was conducted to determine the individual's hearing sensitivity by a peak V of the waveform using tone-burst and click stimuli. Results: The BC direct showed a different pattern between low and high frequencies. Precisely, its thresholds were 13.25 and 12.25 dB HL at 0.5 and 1 kHz, respectively, but 19 and 19.75 dB HL at 2 and 4 kHz, respectively. A significant positive correlation existed between BC direct and PTA at 1 kHz, which was also correlated with ABR. Conclusions: Based on the current data, the thresholds of BC direct were similar to BC PTA at low frequencies and BC ABR at high frequencies. The thresholds of BC direct might be predictable at approximately 5 dB higher (or lower) than that in PTA, although a large data set is required for standardization.

• Korean Journal of Audiology
• /
• v.24 no.2
• /
• pp.85-90
• /
• 2020

Background and Objectives: The present study aimed to compare thresholds of direct bone-conduction (BC direct) with those of behaviorally measured BC pure-tone audiometry (PTA) and objectively measured BC auditory brainstem response (ABR) to confirm the clinical feasibility of their relationships. Subjects and Methods: Young adults with normal hearing participated in the study to determine the thresholds from three measurements at four testing frequencies. In the BC direct, the vibrator of a bone-anchored hearing aid softband was placed on the right mastoid of each subject. In both PTA and ABR, a B71 bone oscillator was placed on the subject's right mastoid. While the subject's thresholds of BC direct and BC PTA were determined with a clinically routine 5-dB step procedure, BC ABR was conducted to determine the individual's hearing sensitivity by a peak V of the waveform using tone-burst and click stimuli. Results: The BC direct showed a different pattern between low and high frequencies. Precisely, its thresholds were 13.25 and 12.25 dB HL at 0.5 and 1 kHz, respectively, but 19 and 19.75 dB HL at 2 and 4 kHz, respectively. A significant positive correlation existed between BC direct and PTA at 1 kHz, which was also correlated with ABR. Conclusions: Based on the current data, the thresholds of BC direct were similar to BC PTA at low frequencies and BC ABR at high frequencies. The thresholds of BC direct might be predictable at approximately 5 dB higher (or lower) than that in PTA, although a large data set is required for standardization.

• Restorative Dentistry and Endodontics
• /
• v.36 no.6
• /
• pp.465-476
• /
• 2011

In current endodontic practice, introduction of operating microscope, ultrasonic instruments, and microinstruments has induced a big change in the field of surgical retreatment. In this study, we aimed to offer key steps of endodontic microsurgery procedure compared with traditional root-end surgery, and to evaluate factors influencing success and failure based on published articles. Endodontic microsurgery is a surgical procedure performed with the aid of a microscope, ultrasonic instruments and modern microsurgical instruments. The microscope provides magnification and illumination - essential for identifying minute details of the apical anatomy. Ultrasonic instruments facilitate the precise root-end preparation that is within the anatomical space of the canal. Modern endodontics can therefore be performed with precision and predictability, thus eliminating the disadvantages inherent in traditional periapical surgery such as large osteotomy, beveled apicoectomy, inaccurate root-end preparation and the inability to observe isthmus. Factors influencing the outcomes of endodontic microsurgery may be diverse, but standardization of procedures can minimize its range. Among patient and tooth-related factors, periodontal status and tooth position are known to be prognostic, but there are only few articles concerning this matter. High-evidence randomized clinical trials or prospective cohort studies are needed to confirm these findings.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.49 no.6
• /
• pp.25-34
• /
• 2012

New calibration method for the near-field scanning (NFS) system is presented. The proposed calibration method consisted of a new near-field antenna (NFP) and newly devised patterns as circular patch patterns (CPPs) and meander patterns (MPs). The proposed patterns were used for improving spatial resolutions and simplifying a calibration procedure of the NFP compared to the conventional method defined in the IEC61967-3 and 6. Also, the effect of the length of NFPs on attenuation characteristics was investigated with length of 8mm and 30mm. For them, we designed and fabricated CPPs of diameter (D) = 20, 40, 60, and 100mm and MPs of various widths and spaces. We found the reverse relations between spatial resolutions and heights of measuring points by using simplified calibration procedure. The testing result shows that the spatial resolution of $120{\mu}m$ at height of $200{\mu}m$ was verified without complex correlation algorithms under 8GHz. For manufacturing cost all patterns and the NFP were realized with low-cost fabrication using PCB (FR-4) not by a conventional LTCC process. For verification of chip-level EMC from the results, near-field scanning system (NFSS) having step resolution of Sub-micron scale was produced and by using the proposed NFSS and proposed NFP measurement of chip shows accurately the shape of the resolution of $200{\mu}m$ patterns for securing a high level of chip-level EMC verification.

• Tunnel and Underground Space
• /
• v.33 no.5
• /
• pp.348-372
• /
• 2023

In relation to the high-level radioactive waste disposal project in deep fractured rock aquifer environments, it is essential to evaluate hydrogeological characteristics for evaluating the suitability of the site and operational stability. Such subsurface hydrogeological data is obtained through in-situ tests using boreholes excavated at the target site. The accuracy and reliability of the investigation results are directly related to the selection of appropriate test methods, the performance of the investigation system, standardization of the investigation procedure. In this report, we introduce the detailed procedures for the representative test method, the constant pressure injection test (CPIT), which is used to determine the key hydrogeological parameters of the subsurface fractured rock aquifer, namely hydraulic conductivity and storativity. This report further refines the standard test method suggested by the KSRM in 2022 and includes practical field application case conducted in volcanic rock aquifers where this investigation procedure has been applied.

• Journal of Food Hygiene and Safety
• /
• v.39 no.2
• /
• pp.72-82
• /
• 2024

This study aimed to develop a scientifically and systematically standardized xylooligosaccharide analytical method that can be applied to products with various formulations. The analysis method was conducted using HPLC with Cadenza C₁₈ column, involving pre-column derivatization with 1-phenyl-3-methyl-5-pyrazoline (PMP) and UV detection at 254 nm. The xylooligosaccharide content was analyzed by converting xylooligosaccharide into xylose through acid hydrolysis. The pre-treated methods were compared and evaluated by varying sonication time, acid hydrolysis time, and concentration. Optimal equipment conditions were achieved with a mobile phase consisting of 20 mM potassium phosphate buffer (pH 6)-acetonitrile (78:22, v/v) through isocratic elution at a flow rate of 0.5 mL/min (254 nm). Furthermore, we validated the advanced standardized analysis method to support the suitability of the proposed analytical procedure such as specificity, linearity, detection limits (LOD), quantitative limits (LOQ), accuracy, and precision. The standardized analysis method is now in use for monitoring relevant health-functional food products available in the market. Our results have demonstrated that the standardized analysis method is expected to enhance the reliability of quality control for healthy functional foods containing xylooligosaccharide.

• Journal of KIISE:Information Networking
• /
• v.35 no.5
• /
• pp.437-452
• /
• 2008

IEEE 802.16j MR networks introduce RSs (Relay Stations) within the IEEE 802.16 system in order to enhance the data throughput and extend the coverage. However, the current standardization defines that the BS (Base Station) controls MS's (Mobile Station's) handover, not only it induces the large signaling overhead but also handover latency could increase. In this paper, we propose a handover protocol in the MR networks where the high capability RSs that can process the MS's control functions are deployed. First, we classify the handover scenarios for the MR networks with the high capability RSs. Then, we define the MAC handover procedure, corresponding MAC management messages and the transmission routes for the proposed messages so that an 802.16e MS can perform seamless handover without noticing it is attached to an MR network. The simulation results show that the proposed handover protocol not only reduces the MAC management message overhead transferred through the wireless links compared to IEEE 802.16j/D1, which is the current standard for MR networks, but also performs the rapider and more secure MS handover than IEEE 802.16e and IEEE 802.16j/D1.