• 대한수의학회지
• /
• 제27권2호
• /
• pp.321-330
• /
• 1987

In the endemic area of bovine piroplasmosis in Chonbuk Province, total of 486 heads of Holstein cow selected from 14 farms randomly were examined the infection status of piroplasma and their blood values. The results obtained were summarized as follows: 1. The etiological agent was only Theileria sergenti and none of the Babesia sp. infection. 2. All of the 486 heads of examined cow were infected with Theileria sergenti (100%). 3. In the initial examination of 11 farms in early summer, the means of blood values were as follows; RBC:$526{\pm}84(10^4/mm^3$), Ht:$27.9{\pm}2.8%$, SP:$7.5{\pm}0.6g/dl$, WBC: $11586{\pm}354/mm^3$, and Fibrinogen: $578.5{\pm}164.1mg/dl$. 4. In the second examinations in slimmer season, the blood values of examined cows had little varieties. But in the winter season, cows housed in the barn, the blood values were greatly increased; RBC: $601{\pm}77(10^4/mm^3)$, (F-value: 37.186**), Ht: $30.5{\pm}1.3%$(F-value: 15.626**) Hb: $12.2{\pm}1.3g/dl$(F-value: 5.899**), SP: $7.4{\pm}0.6g/dl$(F-value: 5.05**). 5. To determine the piroplasma infection in the many herds of cow, the measurement of Ht, Hb, and SP values etc. were more effective and helpful to find the weak cow because the examined process are not only to be easily carry out many samples but also to be done very simple and rapidly. 6. The indications of therapeutic standard values were stablished as follows; the less than 20% in the Ht value, below the 10g/dl in the Hb value, and less than 6g/dl in SP value. When the one among the therapeutic standard values, Ht, Hb, and SP was below the therapeutic standard value, the cow was treated with nutriments. When more than two among them were below the therapeutic standard, the cow was treated with Berenil, at once. In this way, there was no one head which represented clinical signs of piroplasmosis among 486 heads of cow at 14 farms during the year of 1986. 7. In a Korean native cattle infected with Thieleria sergenti seriously, the recovery of blood values was very prolonged by the treatment of Berenil only. But by the transfusion of 300ml blood collected from normal cow, the blood values were recovered rapidly.

• 동굴
• /
• 제14권15호
• /
• pp.42-90
• /
• 1987

제주화산도의 암석학에 대한 암석기재 및 총화학 조성의 63종은 이문원에 의해 보고되고 있다. 총화학조성 데-타는 FORTRAN77의 프로그램에 의해 해석을 하였다. 해석에는 우선 최소자집법에 의해 환산식과 산분도를 검토했다. 다음에 통계적 데-타는 평균치, 최대치, 최소치, 범위, 표준편차, 분산, 표준오차 및 변동계수를 구했다. 표준편차의 큰 단위 물질은 SiO$_2$, MgO 및 FeO이고 작은 단위 물질은 MnO와 P$_2$O$_{5}$이다. 표준오차와 분산은 표준편차와 매우 유사한 조항이 있다. 그렇지만 변동계수는 표준편차와 다르다. 여기에서 큰 단위 변동계수는 $H_2O$$^{-}$ 및 $H_2O$$^{+}$이고, 작은 단위 변동계수는 $Al_2$O$_3$ 및 SiO$_2$ 이다. 상관계수의 계산은 정과 부의 상관성을 SiO$_2$, $Al_2$O$_3$ 및 TiO$_2$에 대해서 다른 조성과의 관계를 계산적으로 구할수 있다.

• 대한본초학회지
• /
• 제32권1호
• /
• pp.55-62
• /
• 2017

Objectives : Crataegi Fructus has been used as traditional medicines for more digestion action, amenorrhea due to blood stasis, and hyperlipemia. The aim of this study was to compare of Crataegi Fructus in South Korea collected during three years according to the standards in monographs of the Korean Pharmacopoeia Eleventh edition (KP 11). Methods : Crataegi Fructus was carried out identification test (Qualitative reaction, Thin layer chromatography), heavy metal test, and total ash registered at KP. Add to we tested loss on dry, contents of ethanol-soluble extracts, and HPLC profiling. Results : Identification test (TLC) was on comparing with ursolic acid standard solution in $R_f$ value, all samples showed red purple spot ($R_f$ value 0.9). Ursolic acid spot in $R_f$ value 0.35 showed by changing mobile phase condition. Heavy metals showed contents for Pb, Cd, As, and Hg range of 0.0 ~ 0.5 ppm, 0.0 ~ 0.2 ppm, 0.0 ~ 0.3 ppm, and 0.0 ~ 0.1 ppm. Loss on drying was ranged from 5.5 to 11.9 %, total ash was between the range 2.7 ~ 4.0 %. Contents of ethanol-soluble extracts was ranged from 17.8 to 44.9 %. The content of chlorogenic acid was ranged from 0.0 to 0.1 % based on the chlorogenic acid standard curve. Conclusion : We have verified the current specification standard of Crataegi Fructus and standard that is not set. We hope that it will help the standardization of Crataegi Fructus.

• Journal of information and communication convergence engineering
• /
• 제9권6호
• /
• pp.758-762
• /
• 2011

In this paper an efficient algorithm is proposed to remove additive white Gaussian noise(AWGN) with edge preservation. A function is used to separate the filtering mask to two sets according to the direction information. Then, we calculate the mean and standard deviation of the pixels in each set. In order to preserve the details, we also compare standard deviations between the two sets to find out smaller one. Corrupted pixel is replaced by the mean of the filtering window's median value and the smaller set's mean value that the rate of change is faster than the other one. Experiment results show that the proposed algorithm outperforms with significant improvement in image quality than the conventional algorithms. The proposed method removes the Gaussian noise very effectively.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2005년도 추계 학술발표회 제17권2호
• /
• pp.515-518
• /
• 2005

In recent years, many research works have been carried out in order to obtain a more controlled durability and long-term performance of concrete structures exposed to chloride environments. In particular, the development of new procedures for probability-based durability analysis and design has been proved to be very valuable. To carry out the procedures described above, the statistical properties of design valuables such as diffusion coefficient of chloride ion, surface chloride concentration, and chloride threshold value etc. should be known. For this purpose, this paper presents the statistical properties of the diffusion coefficient of chloride ion such as mean value and standard deviation with water-cement(w/c) ratio and curing conditions, respectively. It was observed from the test that the standard deviation for the diffusion coefficient of chloride ion was found to be small with decrease in the w/c ratio irrespective of curing conditions and that of standard curing was found to be smaller than that of field curing.

• 한국건설관리학회:학술대회논문집
• /
• 한국건설관리학회 2006년도 정기학술발표대회 논문집
• /
• pp.659-662
• /
• 2006

플랜트 산업은 2004년도 기준 해외 건설 수주액의 70%를 차지하는 매우 중요한 산업이다. 플랜트 산업의 기술력은 일부 시설관련 상세설계와 시공부문의 경쟁력을 확보한 상태이다. 그러나 플랜트 산업 가운데 고부가가치 창출이 가능한 기획, 기본설계 기술이 미흡하여 기술력 향상이 필요하다. 따라서 고부가가치 창출이 가능한 기획, 기본설계 기술 경쟁력을 향상시키기 위하여 플랜트 설계를 위한 표준코드의 문제점 및 개선방향을 제시하고자 한다.

• Journal of the Korean Statistical Society
• /
• 제33권3호
• /
• pp.323-337
• /
• 2004

This article coined a general class of estimators for various measures in normal population when some' a priori' or guessed value of standard deviation a is available in addition to sample information. The class of estimators is primarily defined for a function of standard deviation. An unbiased estimator and the minimum mean squared error estimator are worked out and the suggested class of estimators is compared with these classical estimators. Numerical computations in terms of percent relative efficiency and absolute relative bias established the merits of the proposed class of estimators especially for small samples. Simulation study confirms the excellence of the proposed class of estimators. The beauty of this article lies in estimation of various measures like standard deviation, variance, Fisher information, precision of sample mean, process capability index $C_{p}$, fourth moment about mean, mean deviation about mean etc. as particular cases of the proposed class of estimators.

• 설비공학논문집
• /
• 제22권10호
• /
• pp.719-726
• /
• 2010

In this paper, the appropriate thermal storage time of an air-conditioning system with slab thermal storage was considered by use of summer measurement values. Two standards of heat extraction rate and criterion function were established as the standard that evaluates appropriateness. When heat extraction rate was a standard, zero hour and seven hours were obtained as appropriate thermal storage time, in the case of evaluation by energy consumption and running cost individually. Also, when criterion function was a standard, the difference between energy consumption and running cost was small, it was because the weight function to room air temperature deviation was much bigger than heat extraction rate.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제17권5호
• /
• pp.1356-1376
• /
• 2023

Software effort estimation is one of the most difficult tasks in software development whereas predictability is also of equal importance for strategic management. Accurate prediction of the actual cost that will be incurred in software development can be very beneficial for the strategic management. This study discusses the latest trends in software estimation focusing on analogy-based techniques to show how they have improved the accuracy for software effort estimation. It applies the standard deviation technique to the expected value of analogy-based estimates to improve accuracy. In more than 60 percent cases the applied technique of this study helped in improving the accuracy of software estimation by reducing the Magnitude of Relative Error (MRE). The technique is simple and it calculates the expected value of cost or time and then uses different confidence levels which help in making more accurate commitments to the customers.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2003년도 봄 학술발표회 논문집
• /
• pp.457-462
• /
• 2003

It studies the non-structural crack factors that are produced in Steel Box Girder Bridge concrete floor plate using analytical method. It mainly studies humidity and design standard of concrete strength. It used MIDAS CIVIL Ver 5.4.0, a general structure analysis program that applies drying shrinkage rate of domestic road bridge design standard and standard value of creep coefficient, CEF-FIP standard equation and ACI standard equation from the aspect of creep, drying shrinkage and hydration heat to see the effect of the two factors on concrete crack and found the following result. The analytical results of this study showed that the initial stress, which was obtained by ACI standard, exceeds the allowable tensile stress between 5 to 18 days. This result means that even if a bridge is designed and constructed according to design standard, the bridge can have cracks due to various variables such as drying shrinkage, hydration heat and creep that produce stress in slab.