• 핵의학기술
• /
• 제27권1호
• /
• pp.55-61
• /
• 2023

Purpose In this study, the monthly population distribution was calculated for statistical verification of 10 tests (CA19-9, CA15-3, testosterone, PTH, calcitonin, AFP, CEA, CA72-4, PSA, estradiol) with changed reagents, and the trend of change By comparing and analyzing the results, we want to verify the accuracy of the results and improve the reliability of the test. Materials and Methods From June 2021 to February 2023, for the 10 items in which the reagent was changed, the monthly percentage and standard deviation index before and after the reagent change were compared, respectively. At this time, the reference value was arbitrarily set for the comparison group in consideration of the reference value of the test item, and the groups were subdivided and compared, and the standard deviation index allowed range was -2.0 or more and 2.0 or less. Results For CA19-9, CA15-3, AFP, CEA, and calcitonin 5 test items, the change in monthly ratio in all test sections before and after the reagent change was kept constant. On the other hand, for CA72-4, PSA, testosterone, PTH, and estradiol items, the standard deviation index exceeded the acceptable standard after changing the reagent. CA72-4 test items showed an increasing trend in standard deviation index in the test section exceeding the reference value. In the case of the PSA test item, the maintenance ratio of 0.04 ng/mL was significantly decreased after changing the reagent. The testosterone test item had a standard deviation index of -2.5 in the test section exceeding 10.1 ng/mL after changing the reagent, and the standard deviation index of the PTH test item was out of the acceptable range in all test sections. It was confirmed that the estradiol test item showed an overall increase in the result value. Conclusion Through this study, the continuity and accuracy of the test results could be verified. It is considered that the stability of the test can be secured by analyzing the factors affecting the test result and solving the cause for the test item whose standard deviation index is out of the acceptable standard.

• 한국도로학회논문집
• /
• 제8권1호
• /
• pp.89-98
• /
• 2006

오르막차로 설계에 쓰이는 표준트럭의 중량/마력비는 200 lb/hp로 알려져 있다. 그 값은 일반적으로 다양하기 마련인 지역간 트럭의 분포를 일정하다고 간주하여 트럭의 성능을 한가지로 표준화시킨 값이다. 또한 실제 교통량 중에서 트럭구성비를 측정하기보다는 그동안 전국범위의 트럭 등록대수 기준으로 표준트럭화 시킨 값이다. 따라서 표준트럭의 중량마력비는 지역적 산업적 트럭의 다양성이나 실제 트럭분포와 거리가 있다고 할 수 있다. 이러한 문제를 해결하기 위하여 본 논문에서는 실제 트럭 구성비에 지역특성을 반영한 다양한 표준트럭의 중량마력비에 대해 검토하였다. 본 논문을 위해 전국에 걸쳐 고속도로 요금소에서 측정한 개별트럭의 중량마력비를 사용하였다. 지역적 분석을 위해 전국 8개 지역으로 나누고, 지역별 중량/마력비를 특성화하여 현재 단일기준의 지역별 적용성을 검토하였다. 분석결과 전국의 표준트럭은 208 lb/hp로 현재의 200 lb/hp와 8 lb/hp 차이가 나며, 지역별로 분석한 결과 170 lb/hp $\sim$ 230 lb로 현재 기준과 30 lb/hp 내외의 차이가 나는 것으로 나타났다. 그 결과로 지역별 트럭분포의 격차가 있음을 확인할 수 있었고 전국적인 지역특성을 반영한 세가지의 중력마력비가 제안될 수 있었다. 다양한 표준트럭이 설계에 반영이 되면 두가지 효과가 기대된다. 즉 트럭과 승용차의 오르막차로에서의 속도차 때문에 발생하는 추돌사고를 줄이고 또한 특정지역에서 오르막차로 건설비를 줄이는 것이 가능할 것으로 생각된다.

• 유체기계공업학회:학술대회논문집
• /
• 유체기계공업학회 2002년도 유체기계 연구개발 발표회 논문집
• /
• pp.363-369
• /
• 2002

Orifice meter is the most widely used flowmeter in custody transfer between KOGAS and city gas companies. Absolute pressure value is needed to calculate the gas flow of orifice metering system, but the gauge pressure transmitters are mainly used in the field. In case that the gauge pressure transmitters are used, the fixed value as standard atmospheric pressure(101.325kPa) is applied for the absolute pressure value. The real, local atmospheric pressures of each metering station are different from the standard condition as the altitude and weather conditions. In this study the flow calculation errors were quantitatively analyzed through examining the atmospheric pressures of 50 stations of KOGAS. The data for analysis are such like the time data of supplied gas amount, the altitude of each metering station, the time data of atmospheric pressures and altitudes of each weather observatory. The results showed that the local atmospheric pressures were different from the standard value and the gas flow calculation errors were distributed between $-0.024\%{\~}0.025\%$ based on the supplied gas amount in the year 1999 and 2000.

• Journal of the Korean Data and Information Science Society
• /
• 제21권4호
• /
• pp.803-811
• /
• 2010

This study analyzes the characteristics of preference ratings by dividing estimated values into four groups according to rank correlation coefficient after obtaining preference estimated value to user's ratings by using collaborative filtering algorithm. It is known that the value of standard error of skewness and standard error of kurtosis lower in the group of higher rank correlation coefficient This explains that the preference of higher rank correlation coefficient has lower extreme values and the differences of preference rating values. In addition, top n recommendation lists are made after obtaining rank fitting by using the result ranks of prediction value and the ranks of real rated values, and this top n is applied to the four groups. The value of top n recommendation is calculated higher in the group of higher rank correlation coefficient, and the recommendation accuracy in the group of higher rank correlation coefficient is higher than that in the group of lower rank correlation coefficient Thus, when using standard error of skewness and standard error of kurtosis in recommender system, rank correlation coefficient can be higher, and so the accuracy of recommendation prediction can be increased.

• 한국항공우주학회지
• /
• 제37권12호
• /
• pp.1232-1237
• /
• 2009

국제민간항공기구 및 미 연방항공청에서는 항공기 이 착륙에 적용될 수 있는 지역위성항법보강시스템 (GBAS)에 대한 연구 개발을 수행하고 있다. 항공기 이 착륙에 위성항법시스템이 사용되는 만큼 시스템에 대한 무결성 확보가 최우선시 되어야 한다. 이를 위해 GBAS에서는 발생 가능성이 있는 오차 모델을 통해 위치 오차 예측값을 계산하고 이를 허용 한계치를 초과 하는 지 확인하고, 만약 초과하였을 경우 항공기는 GBAS 시스템 활용을 중단하고 다른 항법수단을 강구하게 된다. 하지만 높은 위치 오차 예측값은 시스템의 무결성 확보에는 도움이 되겠지만, 가용성 확보에 어려움이 있다. 본 논문에서는 제주도 국제공항에 설치되어 있는 항공우주연구원 GBAS 기준국의 실제 데이터를 사용하여, 위치 오차 예측값 계산에 사용될 수 있는 B-Value 기반의 지상국 오차 표준편차 모델 제시하였다. 또한 제시된 오차 표준편차 모델에 시그마 인플레이션을 적용하여 GBAS의 가용성 향상을 검증하였다.

• 대한치과기공학회지
• /
• 제35권4호
• /
• pp.415-424
• /
• 2013

Purpose: This study is to present a standard value for clinical crown angulation and inclination required in laboratory process and see if the value can be used for actual laboratory process. Methods: In order to find out a standard value for clinical crown angulation and inclination, this study made a study model of normal occlusion of 21 females in twenties. The clinical crown angulation and inclination of both six-maxillary and six-mandibular anterior teeth are measured by Set-up Model Checker. From the measured value above, the mean and standard deviation of the twelve teeth are obtained, and then the mean of the teeth between right and left side is calculated. Results: Each clinical crown angulation of maxillary central incisor, lateral incisor, and canine is like this; $1.0^{\circ}{\pm}1.3^{\circ}$, $3.0^{\circ}{\pm}1.3^{\circ}$, and $5.0^{\circ}{\pm}1.4^{\circ}$. In case of mandibular, each degree is like this; $0.6^{\circ}{\pm}1.1^{\circ}$, $1.5^{\circ}{\pm}1.1^{\circ}$, and $4.1^{\circ}{\pm}1.1^{\circ}$. Each clinical crown inclination of maxillary central incisor, lateral incisor, and canine is like this; $6.1^{\circ}{\pm}1.8^{\circ}$, $4.5^{\circ}{\pm}1.9^{\circ}$, and $-6.2^{\circ}{\pm}1.4^{\circ}$. In case of mandibular, each degree is like this; $0.3^{\circ}{\pm}1.5^{\circ}$, $0.3^{\circ}{\pm}1.8^{\circ}$, and $-7.5^{\circ}{\pm}1.8^{\circ}$. Conclusion: As the result, the mean value for clinical crown angulation and inclination can be referred to actual laboratory process. However, the mean value is different from those of the precedent study and an unsatisfied one for adopting the standard value.

• 한국방재학회:학술대회논문집
• /
• 한국방재학회 2007년도 정기총회 및 학술발표대회
• /
• pp.33-36
• /
• 2007

This study shows the basic data for setting up a response modification factor of unreinforcement masonry structure by considering and analyzing the experiment results of the domestic walls. If the result of this study compare with the value R of KBC-2005, 1.5, the average value, 1.2, is the low value. However, the maximum value, 2.57, is more than 70% bigger than the standard value. The standard value of overstrength factor, 2.5 is judged to have relatively bigger value than this study.

• 한국연초학회지
• /
• 제1권1호
• /
• pp.71-77
• /
• 1979

제조담배의 중량을 엽배합 표준과 잎담배의 팽숭성, 제품제제 그리고 외관품질을 인자로 계산하였다. 계산에 의해 새로이 정한 제품의 중량은 tobacco rod가 60mm인 제품이 760mg으로서 현재의 표준중량 790mg∼830mg보다 5.1 %∼6.8%가 적었으며, 64mm 제품은 820mg으로서 870mg∼900mg보다 5.9%∼9.1%를 줄일 수 있고 56mm 제품은 720mg으로서 770mg∼ 780mg에 비하여 6.9%∼8.6%가적은 값으로서 지금의 제품담배의 중략보다 5∼ 9%를 줄일 수 있음을 보여 주고 있다.

• 대한기계학회논문집
• /
• 제13권1호
• /
• pp.67-76
• /
• 1989

본 논문에서는 표면거칠기 측정에 있어 70% 이상을 차지하는 촉침식을 이용하여 필터의 cut-off치와 위상특성에 따른 표면거칠기 값의 변화와 필터의 선택에 따른 장점 및 문제점에 대하여 알아보고자 한다.

• 품질경영학회지
• /
• 제25권1호
• /
• pp.182-192
• /
• 1997

The well-known standard normal distribution has been used within the limit of standard variable value of u=3.59. However, the probability values above the limit are not given in the literature. In this study, a probability computation program for standard normal distribution to u=5.99 with the proportional normal distribution a, pp.oximation suggested by Abramowitz and Stegun, Hastings is developed. The new standard normal distribution table developed by the program is presented and will be of help to estimate of probability values for testing and estimation of process mean value, lot acceptable probability, defective percentage of PPM unit of an out-of specification limit, process capability, test power of control charts, probability and statistics.