• Wind and Structures
• /
• 제21권5호
• /
• pp.461-487
• /
• 2015

In recent years, the Graphics Processing Unit (GPU) has become a competitive computing technology in comparison with the standard Central Processing Unit (CPU) technology due to reduced unit cost, energy and computing time. This paper describes the derivation and implementation of GPU-based algorithms for the analysis of wind loading uncertainty on high-rise systems, in line with the research field of probability-based wind engineering. The study begins by presenting an application of the GPU technology to basic linear algebra problems to demonstrate advantages and limitations. Subsequently, Monte-Carlo integration and synthetic generation of wind turbulence are examined. Finally, the GPU architecture is used for the dynamic analysis of three high-rise structural systems under uncertain wind loads. In the first example the fragility analysis of a single degree-of-freedom structure is illustrated. Since fragility analysis employs sampling-based Monte Carlo simulation, it is feasible to distribute the evaluation of different random parameters among different GPU threads and to compute the results in parallel. In the second case the fragility analysis is carried out on a continuum structure, i.e., a tall building, in which double integration is required to evaluate the generalized turbulent wind load and the dynamic response in the frequency domain. The third example examines the computation of the generalized coupled wind load and response on a tall building in both along-wind and cross-wind directions. It is concluded that the GPU can perform computational tasks on average 10 times faster than the CPU.

• 대한건축학회논문집:계획계
• /
• 제35권11호
• /
• pp.53-60
• /
• 2019

Multi-unit house, multi-household house, row house and apartments with less than 500 households were included in the list of anti-crime for buildings following the revision of the "notice of crime prevention building standards" on July 31, 2019. Strengthening the performance of crime prevention buildings is inevitable to increase the cost of building construction, including installation of preventive facilities and use of facilities that have secured performance. Thus an economic analysis on the costs and expected benefits of implementing the standards is required for social consensus. Economic analysis is divided into cost analysis and benefit analysis. This study aims to perform an economic analysis on the installation of crime prevention facilities in the buildings subject to expanded crime prevention obligations. Cost analysis is calculated as the sum of the cost of installation and the price of the crime prevention facilities installed for each target residential building. Benefit analysis is calculated as the social cost of targeted crimes that are expected to decrease due to the installation of crime prevention facilities. Economic analysis shows that the total cost of installing crime prevention facilities in residential buildings is estimated at 107.31 billion won per year, while the total benefit from enhanced crime prevention performance is estimated at 9.38 billion won per year. Considering inflation, benefits are expected to outpace costs in the 28th year since the system was implemented.

• 한국건설관리학회논문집
• /
• 제12권6호
• /
• pp.42-53
• /
• 2011

2004년 예정가격 산정방법으로 실적공사비 적산제도가 본격적으로 시행되면서 상대적으로 표준품셈 적산제도의 적용이 하락하였다. 그러나 2010년 하반기 예정가격 산정시 표준품셈 적산제도의 적용비중은 45%이며, 여전히 높은 적용비중을 유지하고 있다. 현행 표준품셈은 예정가격의 산정에 과도한 시간이 소요되고, 시공계획과 자원분배에 적용하기 어려운 단점이 있다. 이와 같은 단점을 개선하기 위하여 본 연구에서는 국내외 품셈의 형식을 고찰하여 이를 국내 도로분야 대표공종에 적용하여 기존 품셈을 일단위 작업조 기반 생산성 정보로 산출하여 유사한 조건하에서 일본 미국의 생산성 정보 및 현장자문을 통한 정보와 비교하였다. 본 연구를 통해 적용된 작업조기반 생산성 정보 산출 방법과 산출 정보의 효용성을 확인하고자한다. 이러한 과정을 통하여 표준품셈을 통한 작업조기반 생산성 정보 산정 방법'과 일단위 작업조 기반 생산성 정보를 제시하고자 한다.

• 플랜트 저널
• /
• 제11권2호
• /
• pp.45-51
• /
• 2015

손실비용을 고려하여 발전소 효율에 큰 영향을 미치는 복수기의 운전 관리 방안을 연구하였다. 2013년 S발전소의 해수온도는 복수기 압력과 뚜렷한 상관관계를 보였으며, 해수온도가 변화함에 따라 복수기 압력은 설계 압력 38.1 mmHg 보다 -1.7~+20 mmHg의 차이로 운전되었다. 제작사에서 제시한 열소비율 보정곡선을 통해 복수기 압력 1 mmHg 증가시 1,2호기 0.0201%, 3,4호기 0.0155%의 효율 손실과 1,2호기 12,830 원/h, 3,4호기 9,832 원/h의 시간당 손실비용이 발생함을 알 수 있었다. 또한 계절별 대응운전, 설비 노후화, 예방정비 시점에 따른 손실비용의 차이를 확인하고 월별 관리범위를 설정하였다. 이를 통해 운전 관리범위 준수, 손실비용을 고려한 정비 계획 수립으로 최소 2.5억원/년(1호기, 40일 정비)의 관리적 손실을 줄일 수 있을 것으로 판단된다.

• 한국건축시공학회지
• /
• 제20권4호
• /
• pp.375-382
• /
• 2020

국내 국경 지역의 주요 도로에 낙석 장애물을 설치, 운영하여 적군의 이동을 방지하고 차단하고 있다. 그러나 접경지역의 개발로 인한 교통량 증가는 낙석으로 인한 도로 교통 혼잡, 교통 안전, 도시 미관 저하 등 많은 문제를 야기하고 있다. 따라서 본 연구는 단위별로 다르게 적용되는 낙석장해물 철거 및 교체 시설 설치 지침을 제공하고, 운영에 필요한 낙석 장해물 유지비에 대한 국방부의 정책 방향을 제시하고자 하였다. 본 연구에서는 낙석 장해물 제거 및 대체시설 설치에 관한 지침 연구의 일환으로 필수 낙하 장해물에 대한 표준 단가를 제시하여 암석 제거 여부를 판단 할때 판단 자료로 활용하고자 하였다.

• Journal of Information Processing Systems
• /
• 제17권3호
• /
• pp.473-488
• /
• 2021

The enterprise resource planning (ERP) system is a standardized and advanced business process that many companies are implementing now-a-days through customization. However, it affects the efficiency of operations as these customizations are based on uniqueness. In this study, we analyzed the impact of customized modules and processing time on customer service request (CSR), by utilizing the stacked CSR data during the construction and operation of ERP, focusing on small and medium-sized enterprises (SMEs). As a result, a positive correlation was found between unit companies and the length of ERP implementation; ERP modules and the length of ERP implementation; ERP modules and unit companies; and the type of ERP implementation and ERP module. In terms of CSR, a comparison of CSR processing time of CBO (customized business object) module and STD (standard) module revealed that while the five modules did not display statistically significant differences, one module demonstrated a statistically very significant difference. In sum, the analysis indicates that the CBO-type CSR and its processing cost are higher than those of STD-type CSR. These results indicate that companies planning to implement an ERP system should consider the ERP module and their customization ratio and level. It not only gives the theoretical validity that should be considered as an indicator for decision making when ERP is constructed, but also its implications on the impact of processing time suggesting that the maintenance costs and project scheduling of ERP software must also be considered. This study is the first to present the degree of impact on the operation and maintenance of customized modules based on actual data and can provide a theoretical basis for applying SW change ratio in the cost estimation of ERP system maintenance.

• 대한설비공학회:학술대회논문집
• /
• 대한설비공학회 2005년도 동계학술발표대회 논문집
• /
• pp.148-154
• /
• 2005

Ground-source (Geothermal) heat pump (GSHP) systems can achieve a higher coefficient of performance than conventional air-source heat pump (ASHP) systems. However, GSHP systems are not widespread in Japan because of their expensive boring costs. The authors have developed a GSHP system that employs the cast-in-place concrete pile foundations of a building as heat exchangers in order to reduce the initial boring cost. In this system, eight U-tubes are arranged around the surface of a cast-in-place concrete pile foundation. The heat exchange capability of this system, subterranean temperature changes and heat pump performance were investigated in a foil-scale experiment. As a result, the average values for heat rejection were 186${\sim}$201 W/m (for pile, 25 W/m per Pair of tubes) while cooling. The average COP of this system was 4.6 while cooling; rendering this system more effective in energy saving terms than the typical ASHP systems. The initial cost of construction per unit for heat extraction and rejection is ${\yen}$72/W for this system, whereas it is f300/W for existing standard borehole systems.

• 한국ITS학회 논문지
• /
• 제5권1호
• /
• pp.31-43
• /
• 2006

실시간 교통정보 수집과 센터 온라인 신호제어를 기본기능으로 하는 경찰청 교통신호제어기 표준규격서가 개발되어 2005년 3월부터 발효되었다. 발표된 규격은 가로구간의 교통상황을 수집하고, 이를 관제센터에 전송하며, 적절한 교통상황별 신호시간을 부여받아 신호등을 제어하는 지능적인 교통신호기의 표준 사양과 기능을 주요 골자로 하고 있다. 과거의 교통신호기들은 부품이 호환되지 않고 제어기능과 통신방법이 상이하여 도시별로 호환되지 않았으며 유지관리의 시간적 경제적 비용을 증가시켰다. 또한 모순검지방법 등 일부 교통안전에 중요한 기능이 비합리적으로 사용되고 있었다. 본 규격에서는 이런 단점을 극복하기 위해 먼저 하드웨어 호환성을 확보하였다. 그리고 모순검지방법을 보완하였으며, 관제센터와의 통신규약을 규격에 포함하여 모든 도시의 센터에 호환되도록 하였다. 개발된 규격은 시제품 제작과 시험과정을 거쳐 결정되었다. 본 규격으로 제조자에 비 의존적인 유지보수체계가 가능해지며 저렴하고 빠른 고장 대응이 가능하다. 또한 일관된 정보처리 및 제어알고리즘이 적용되어 센터설치 업체의 지역선점효과가 점차 사라질 것이며, 지역별 교차로의 교통통제방법이 일원화되어 표준적이고 안전한 교통제어를 할 수 있을 것으로 기대된다.

• 보건행정학회지
• /
• 제25권2호
• /
• pp.107-117
• /
• 2015

Background: The purpose of this study is to analyze the cost for the denture treatment in accordance with the government's plan to expand the National Health Insurance coverage for dental prothesis from July 1, 2012. Methods: We developed the draft of classification of the treatment activities based on the existing researches and expert's review and finalized the standard procedures through confirming by Korean Dental Association. We also made the list of input at each stage of treatments. We conducted survey of 100 dental clinics via post from April 4 to May 20 in 2011 and 37 clinics took part in the survey. The unit of cost calculation is the process from the first visit for denture treatment to setting of denture and adjustment. The manufacturing process performed by dental technician was not included in the cost analysis. Results: The process for the complete denture treatment was classified with 10 stages. The partial denture treatment was classified with 8 stages. The treatment time per each denture is about 5.6 hours for complete dentures and about 6.6 hours for partial dentures. The treatment cost were from 591,108 won to 643,913 won for complete denture and from 670,219 won to 738,840 won for partial denture in 2011, depending on the location, type of the clinics and the types of physician's income. Conclusion: This study shows the example of cost analysis for the treatment to set the fee schedule. Measures to get representative and accurate information need to be made.

• 교육시설
• /
• 제9권3호
• /
• pp.5-12
• /
• 2002

This study attempts to suggest a standard for maintenance and repair cost per each unit area, by analyzing the causes and cost of various maintenance and repair work in the university facilities. The result of my study on the data of maintenance and repair work for 12 years between 1990 and 2001 in the two campuses of the university that I selected for my case study is the following. (1) The yearly average for maintenance and repair cost in the facilities of the university with 67 old and new buildings for the past 12 years was $W4,422/m^2$. In addition, the repair cost based on the calculation of the degree of decrepitude of the buildings was $W10,291/m^2$. (2) The number of causes of maintenance and repair work increase steadily every year, due to the development of universities and changes in the educational environment. A special case like a university merger also appears, which also demands maintenance and repair work of university facilities. (3) It is important that a budget for interior maintenance is increased or added to an extent, in order to minimize the maintenance and repair cost of the university facilities, and to cope with changing educational environments flexibly. (4) The publication of a white paper that includes the planning of a building, construction process, and changes in design, seems to be required for the sake of users' convenience and efficient maintenance and repair work.