• Proceedings of the IEEK Conference
• /
• 1999.11a
• /
• pp.372-375
• /
• 1999

This paper proposes a bit allocation algorithm using adaptive bandwidth for ADSL that uses the DMT technology. In certain cases for high attenuation loops the conventional algorithms are unable to assign data bits to the higher frequency tones, due to the power spectrum mask limitation recommended by ANSI Standard, even if the total power budget is not expended. In the proposed bit allocation algorithm, adjacent empty tones that would not be used merge into single tone, then additional bits is assigned to the merged empty tones. Because additional bits is allocated, most of the available power is used. The proposed algorithm show that total bit increase in about 2~9% bits more than about conventional "water-filling" and "bit removal" algorithms and that is able to use about 93% of the available budget Power

• Phonetics and Speech Sciences
• /
• v.6 no.3
• /
• pp.23-32
• /
• 2014

This study presents the prosodic characteristics of 'Motherese' and 'Teacherese (child care teacher and kindergarten teacher)'. 21 mothers and 24 teachers spoke to children in the child care center or kindergarten. Children are in their 4;00-6;11. Speech and articulation rate, number of accentual phrases (APs), number of intonational phrases (IPs), pitch-related factors (f0, pitch range, f0 standard deviation), and intonation slope (mean Absolute, f0, q-tone slope) were measured. 2 groups spoke 2 sentential types (interrogative_ alternative question, declarative_ coordinated sentence) in 2 situations (one accompanied with the children, the other done without children, but pretending as if they were in front of the children). The results indicate that teachers show more noticeable prosodic characteristics than mothers do.

• Proceedings of the Korean Society of Computer Information Conference
• /
• 2014.07a
• /
• pp.41-42
• /
• 2014

본 논문에서는 스마트폰 케이스에 제품디자인에 있어서 패턴 디자인 활용사례를 알아보고 주조색 분석을 통해 패턴디자인 트렌드를 살펴보는데 그 목적이 있다. 주조색 추출에 사용된 스마트폰 케이스는 +D프로젝트에 출시된 자료를 활용해 9명 디자이너 별 대표제품 2개를 분석했으며, 분석은 한국 표준색 색채분석, KSCA (Korea Standard Color Analysis) 프로그램을사용하여 각각의 이미지에서 5%이상 쓰인 주조색을 추출 하였고, Hue&Tone 분포를 통해 스마트폰케이스 패턴디자인에 사용된 색채 트렌드를 알아보고자 한다. 스마트폰케이스에 사용된 전체 주조색들을 살펴보면 색상에 있어서는 붉은색(R) 과 보라색-파랑색(PB) 의 분포가 상대적으로 높게 나타났고, 색조에 있어서는 밝은(B), 옅은(P) 톤이 가장 많이 사용 된 것을 알 수 있다. 향후 연구에서는 색채를 통한 감성분석을 연구해 스마트폰 케이스 제품디자인에 있어서 색채와 감성 간의 상관관계를 알아보고자 한다.

• Journal of Communications and Networks
• /
• v.11 no.3
• /
• pp.229-239
• /
• 2009

Orthogonal frequency division multiplexing (OFDM) has been adopted as a standard for various high data rate wireless communication systems due to the spectral bandwidth efficiency, robustness to frequency selective fading channels, etc. However, implementation of the OFDM system entails several difficulties. One of the major drawbacks is the high peak-to-average power ratio (PAPR), which results in intercarrier interference, high out-of-band radiation, and bit error rate performance degradation, mainly due to the nonlinearity of the high power amplifier. This paper reviews the conventional PAPR reduction schemes and their modifications for achieving the low computational complexity required for practical implementation in wireless communication systems.

• Journal of Satellite, Information and Communications
• /
• v.9 no.3
• /
• pp.27-32
• /
• 2014

A doppler shift is generated by moving a transmitter or receiver operated in communication systems. The doppler frequency shift between a transmitter and a receiver or the frequency offset present in transceivers must be removed to get the wanted system performance. FTS is used for preventing an accident from operating abnormally and for guaranteeing public protection. A launching vehicle's initial velocity is very fast in order to escape the earth and the amount of doppler shift is large. Recently many studies to adopt the next generation FTS are ongoing. To introduce new FTS, the effects of doppler shift on the performance of the new FTS must be studied. In this paper the doppler effect caused by launching vehicle's velocity affecting the performance of FTS receiver is investigated into two cases, one is for EFTS as a digital FTS and the other is for FTS using a tone signal. Noncoherent DPSK and noncoherent CPFSK are considered as the modulation methods of EFTS. In the cases of the doppler frequency shift of 200Hz present in EFTS using noncoherent DPSK and noncoherent CPFSK are simulated. Simulation results show that $E_b/N_o$ of 0.5dB deteriorates in the region of near BER of about $10^{-5}$ in RS coding. And there is no performance variation in $E_b/N_o$ or $E_b/N_o$ is worsened about 0.1dB in the same BER region for the case of using convolutional and BCH coding. Quadrature detector used in FTS using tone signals is not influenced by the doppler frequency shift.

• Journal of Digital Convergence
• /
• v.14 no.4
• /
• pp.363-370
• /
• 2016

Noise is unwanted sound that is the reason of the stress and hearing loss. The current study attempted to estimate whether the noise of dental laboratory affected stress and pure tone audiometry (PTA) of dental laboratory technicians (DLTs) using heart rate variability, air and bone conduction audiometry. The age, heights, and weights of DLTs were resembled control. Standard deviation of normal to normal interval such as stress resistance and normalized HF of DLTs were significantly decreased, but heart rates, normalized LF, and LF/HF ratio of DLTs were significantly increased compared with control. In air conduction audiometry of DLTs, significant increments of thresholds encountered in 125, 250, 500, 1000, 2000, 3000, 4000, and 6000 Hz in the right ears and 125, 250, 500, 1000, and 2000 Hz in the left ears. Thresholds of bone conduction audiometry in both ears were significantly increased in 250, 500, 1000, 2000, and 4000 Hz. The findings in this study provide that stress and hearing loss observed in noise-exposed DLTs at dental laboratory. Therefore, proper safety precautions should be carried out at dental laboratory.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.53 no.3
• /
• pp.114-123
• /
• 2016

The effective feature extraction method for unmanned aerial vehicle (UAV) detection is proposed and verified in this paper. The UAV engine sound is harmonic complex tone whose frequency ratio is integer and its variation is continuous in time. Using these characteristic, we propose the feature vector composed of a mean and standard deviation of difference value between fundamental frequency with 1st overtone as well as mean variation of their frequency. It was revealed by simulation that the suggested feature vector has excellent discrimination in target signal identification from various interfering signals including frequency variation with time. By comparing Fisher scores, three features based on frequency show outstanding discrimination of measured UAV signals with low signal to noise ratio (SNR). Detection performance with simulated interference signal is compared by MFCC by using ELM classifier and the suggested feature vector shows 37.6% of performance improvement As the SNR increases with time, the proposed feature can detect the target signal ahead of MFCC that needs 4.5 dB higher signal power to detect the target.

• Proceedings of the KIEE Conference
• /
• 1993.07a
• /
• pp.504-506
• /
• 1993

The Joint Photographic Experts Group (JPEG) standard was proposed by the International Standardization Organization (ISO/SC 29/WG 10) and the CCITT SG VIII as an international standard for digital continuous-tone still image compression. The JPEG standard has been widely accepted in electronic imaging, computer graphics, and multi-media applications, however, due to the lossy character of the JPEG compression its application in the field of medical imaging has been limited. In this paper, the JPEG standard was applied to a series of head sections of magnetic resonance (MR) images (256 gray levels, $256{\times}256$ size) and its performance was investigated. For this purpose, DCT-based sequential mode of the JPEG standard was implemented using the CL550 compression chip and progressive and lossless coding was implemented by software without additional hardware. From the experiment, it appears that the compression ratio of about 10 to 20 was obtained for the MR images without noticeable distortion. It is also noted that the error signal between the reconstructed image by the JPEG and the original image was nearly random noise without causing any special-pattern-related artifact. Although the coding efficiency of the progressive and hierarchical coding is identical to that of the sequential coding in compression ratio and SNR, it has useful features In fast search of patient Image from huge image data base and in remote diagnosis through slow public communication channel.

• The Journal of Korean Philosophical History
• /
• no.56
• /
• pp.119-149
• /
• 2018

Le 樂 is important in Politics of the Kings. It is the same in Nothern Song period(北宋). There was an argument about Le 樂 and Lu 律 in Nothern Song Period. Those who argued were Fan-Jin(范鎭) and Sima-Guang(司馬光). They argued for 30 years. Fan-Jin insists that a standard of weights and measures is Lu and a standard of Lu is the fundamental tone of twelvenotes scale, Hwang-Jong 黃鍾. On the other hand, Sima-Guang insists that a standard of Lu is weights and measures and a standard of Le is Equilibrium and Harmony, Zonghe 中和. Fan-Jin thinks it is possible to restore a Sage King's music through the right standard of Lu. But Sima-Guang thinks it is impossible. Sima-Guang believes that the only way to restore a Sage King's music is to complete Zonghe. And Fan-Jin thinks Zonghe is the work of the king whereas Sima-Guang thinks Zonghe is the order of man and everything. The key point in the argument is Lu and Zonghe. Fan-Jin regards Lu as the basis of music, whereas Sima-Guang regards Zonghe as the basis of music. Lu is a tangible law and Zonghe is a intangible law. Although the argument between the two ended in a stalemate, the argument shows the difference between the scholars at the time.

• Journal of the Korean Graphic Arts Communication Society
• /
• v.31 no.1
• /
• pp.1-14
• /
• 2013

Screen printing is a printing method with flexible plate surface characteristics. In addition, since the appearance of electronics industry the screen printing has been demanding high quality and definition. However, Screen printing is a method for taking ink through mesh opening because screen mesh tends to restrict quality of screen printing. In particular, the biggest problem compared with other printing type is halftone reproduction characteristics. Halftone reproduction characteristics for screen printing depend on screen mesh and opening. Dot losses or dot gains are observed through various types of screen mesh because thread of screen mesh interfere with the movement of the ink. Excessive dot losses or gains can affect the tonal range. Furthermore, this problem can result in other problem such as bad contrast and gray balance. Therefore, it is an important factor to use proper screen mesh for halftone screen printing. However, domestic screen printing industry relies on worker's experience in field rather than depending on objective data although standardized specifications and optimal printing conditions are required for screen printing. For this reason, it is important to stipulate standard condition for domestic screen printing industry. Therefore, it was examined to find tonal range by mesh opening in halftone prints process of screen printing used domestic paper and ink in this study. In addition, TVI(Tone Value Increase) characteristic was observed by comparing to the manuscripts and prints of the dot area ratio. Furthermore, contrast value and gray balance were confirmed for each condition of the printout. Conditions for the proper selection of screen mesh screen for the quality of the prints were also examined, compared with the international standard of screen printing, ISO 12647-5.