• Horticultural Science & Technology
• /
• v.18 no.3
• /
• pp.334-341
• /
• 2000

To develop a nutrient solution for a closed hydroponic system in potato (Solanum tuberosum L.) 'Atlantic' and 'Superior' potatoes were grown with the nutrient solutions whose strengths were 0.25, 0.5, 1.0, and 1.5 of the concentration of the nutrient solution developed by the National Horticultural Experiment Station in Japan. The best results in potato growth and yield were obtained with 0.5 and 1.0 strength nutrient solutions, and nutrient compositions for potato were determined based on the 1.0 strength nutrient solution; $14.4me{\cdot}L^{-1}\;N,\;4.2me{\cdot}L^{-1}\;P,\;7.5me{\cdot}L^{-1}\;K,\;5.5me{\cdot}L^{-1}\;Ca$, and $3.5me{\cdot}L^{-1}\;Mg$ for stolon growth stage and $14.8me{\cdot}L^{-1}\;N,\;4.0me{\cdot}L^{-1}\;P,\;8.5me{\cdot}L^{-1}\;K,\;6.5me{\cdot}L^{-1}\;Ca$, and $3.0me{\cdot}L^{-1}\;Mg$ for tuber growth stage. To examine the suitability of the nutrient solutions developed for potato, the strengths of 1.0 (PS 1.0S), 0.75 (PS 0.75S), or 0.5 (PS 0.5S) were compared with half-strength of Japanese Horticultural Experiment Station' solution (JH 0.5S). Changes in pH, EC, and mineral concentrations in nutrient solutions depended more on solution strength and growth stage than on the type of nutrient solution. However, most elements in solution remained constant with plant age in PS 0.75S solution during stolon growth stage, and in PS 0.5S solution during tuber growth stage. The greatest growth and tuber yield was obtained in the standard strength solution (PS 1.0S), and potato solution developed in this experiment was recommended for hydroponic culture of potato in a closed system.

• Journal of the Korean Society of Radiology
• /
• v.6 no.6
• /
• pp.447-454
• /
• 2012

To examine the performance of a diagnostic X-ray system, we tested a linearity, reproducibility, and Half Value Layer(HVL). The linearity was examined 4 times of irradiation with a given condition, and we recorded a level of radiation. We then calculated the mR/mAs. And the measured value should not be more than 0.1. If the measured value was more than 0.1, we could know that the linearity was decreased. The reproducibility was analyzed 10 times of irradiations at 80kVp, 200mA, 20mAs and 120kVp, 300mA, 8mAs. The values from these analyses were integrated into CV equation, and we could get outputs. The reproducibility was good if the output was lower than 0.05. HVL was measured 3 times of irradiation without a filter, and we inserted additional HLV filters with 0, 1, 2, 4 mm of thickness. We tested the values until we get the measured value less than a half of the value measured without additional filter. We tested the linearity, the reproducibility, and HVL of 5 diagnostic X-ray generators in this facilities. The linearity of No. 1 and No. 5 generator didn't satisfy the standard for radiation safety around 300mA~400mA and 100mA~200mA, respectively. HVL of No.1 generator was not satisfied at 80kVp. The outputs were higher in the three-phase equipment than the single-phase equipment. The old generators need to maintain and exchange of components based on the these results. Then, we could contribute to getting more exact diagnosis increasing a quality of the image and decreasing an expose dose of radiation.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.27 no.3
• /
• pp.311-321
• /
• 2009

The Nation Geodetic Reference System which presents a consistent location standard used in creating a map or developing national land is defined and managed by the law in a nation. Each nation had used its own geodetic system created by astronomical surveying until recently, when Geodetic Reference System(World Geodetic Reference System) has been developed and used to progress in space and satellite geodetic technologies. Korea also amended its geodetic law in December 2001, converting its national geodetic system whose reference an oval figure is Bessel ellipsoid into the World Geodetic Reference System which uses GRS80 ellipsoid as reference ellipsoid. Accordingly, the National Geography Information Institute improved law and systems related to the change for the effective conversion from its national geodetic system into the World Geodetic Reference System. In addition National geographic information institute of the results of various studies is drawn to the World Geodetic Reference System for switching technology-met some of the institutional foundation Despite of accordance with formalities, National geographic information institute, Ministry of Land, Transport and Maritime Affairs and some local government of the World Geodetic Reference System, and local government has or has not spread in public institutions. Therefore, in order to promote the switch to the World Geodetic Reference System, it is required to analyze current technical and institutional problems and obstacles of the switch to the World Geodetic Reference System and to present the resolutions and to establish policy to achieve them. Accordingly, for the promotion of the switch to the World Geodetic Reference System, this study analyzed the results of previous studies, the current state of the switch to the World Geodetic Reference System and the problems of the switch, and then offered technological and institutional supplements. Furthermore, it standardized the subject and type of the conversion, defined the scope of the tasks of the National Geographic Information Institute and its related organizations, and presented the policy direction for the overall use of the World Geodetic Reference System by 2010.

• Journal of Nuclear Fuel Cycle and Waste Technology(JNFCWT)
• /
• v.18 no.1
• /
• pp.51-62
• /
• 2020

This study was conducted to develop a method for depth assessment of embedded sources using gamma-spectrum ratio and for the evaluation of field applicability. To this end, Peak to Compton and Peak to valley ratio changes were evaluated according to ¹³⁷Cs, ⁶⁰Co, ¹⁵²Eu point source depth using HPGe detector and MCNP simulation. The effects of measurement distance of PTV and PTC methods were evaluated. Using the results, the source depth assessment equation using the PTC and PTV methods was derived based on the detection distance of 50 cm. In addition, the sensitivity of detection distance changes was assessed when using PTV and PTC methods, and error increased by 3 to 4 cm when detection distance decreased by 20 cm based on 50 cm. However, it was confirmed that if the detection distance was increased to 100 cm, the effects of detection distance were small. And PTV and PTC methods were compared with the two distance measurement method which evaluates the depth of source by the change of net peak counting rate according to the detection distance. As a result of source depth assessment, the PTV and PTC showed a maximum error of 1.87 cm and the two distance measurement method showed maximum error of 2.69 cm. The results of the experiment confirmed that the accuracy of the PTV and PTC methods was higher than two distance measurement. In addition, Sensitivity evaluation by horizontal position error of source has maximum error of less than 25.59 cm for the two distance measurement method. On the other hand, PTV and PTC method showed high accuracy with maximum error of less than 8.04 cm. In addition, the PTC method has lowest standard deviation for the same time measurement, which is expected to enable rapid measurement.

• Economic and Environmental Geology
• /
• v.50 no.6
• /
• pp.537-544
• /
• 2017

Stable carbon isotope ratio of carbon dioxide (${\delta}^{13}C_{CO2}$) is used as an important indicator in the researches for global climate change and carbon capture and sequestration technology. The ${\delta}^{13}C$ value has been usually analyzed with Isotope Ratio Mass Spectrometer (IRMS). Recently, the use of Laser Absorption Spectrometry (LAS) is increasing because of the cost efficiency and field applicability. The purpose of this study was to suggest practical procedures to prepare laboratory reference gases for ${\delta}^{13}C_{CO2}$ analysis using LAS. $CO_2$ gas was adjusted to have the concentrations within the analytical range. Then, the concentration of $CO_2$ was assessed in a lab approved by the Korea Laboratory Accreditation Scheme and the ${\delta}^{13}C_{CO2}$ value was measured by IRMS. When the instrument ran over 12 hours, the ${\delta}^{13}C$ values were drifted up to ${\pm}10$‰ if the concentration of $CO_2$ was shifted up to 1.0% of relative standard deviation. Therefore, periodical investigation of analytical suitability and correction should be conducted. Because ${\delta}^{13}C_{CO2}$ showed the dependency on $CO_2$ concentration, we suggested the equation for calibrating the concentration effect. After calibration, ${\delta}^{13}C_{CO2}$ was well matched with the result of IRMS within ${\pm}0.52$‰.

• Analytical Science and Technology
• /
• v.27 no.5
• /
• pp.234-242
• /
• 2014

Imicyafos which is a nematicide for controlling root-knot nematodes has been registered in the Republic of Korea in 2012, and the maximum residue limits of imicyafos are set to watermelon and korean melon as each 0.05 mg/kg. Extremely reliable and sensitive analytical method is required for ensuring food safety on imicyafos residues in agricultural commodities. Imicyafos residues in samples were extracted with acetone, partitioned with hexane and dichloromethane, and then purified with florisil. The purified samples were analyzed by HPLC-UVD and confirmed with LC-MS. Linear range was between 0.1~5 mg/kg with the correlation coefficient ($r^2$) 0.99997. Average recoveries of imicyafos ranged from 77.0 to 115.4% at the spiked levels of 0.02 and 0.05 mg/kg with the relative standard deviations of 2.2~9.6%. Limit of detection and quantification were 0.005 and 0.02 mg/kg, respectively. An inter-laboratory study was conducted to validate the determination method in depth, and the results were satisfactory. All of the validation results revealed that the developed analytical method in this study is relevant for imicyafos determination in agricultural commodities and will be used as an official analytical method.

• Applied Chemistry for Engineering
• /
• v.7 no.6
• /
• pp.1034-1042
• /
• 1996

Various $TiO_2-SiO_2$ composite powders were prepared by the modified sol-gel method using 1-dodecanol as DCCA (Dryng Control Chemical Additive ). Their characterizations were carried out and their photocatalytic catalysis was examined on the evolution reaction of hydrogen. The weight losses at $500^{\circ}C$ of only $TiO_2$ and $SiO_2$ powders were 33. 0wt% and 42.5wt%, respectively, and those of the $TiO_2/SiO_2$ powders ($TiO_2/SiO_2=25/75$, 50/50 and 75/25) were about $70.0{\pm}3.0wt%$. The released substances from the powders were almost organic matters. The as-prepared powders except only $TiO_2$ powder were amorphous. Transformation of anatase to rutil was hindered by $SiO_2$ component and the crystallinity of anatase was decreased with increasing $SiO_2$ contents. The as-prepared powders were bulky states. By heating at $600^{\circ}C$ for 1 hr $TiO_2-SiO_2$ powders ($TiO_2=100%$, $TiO_2/SiO_2=75/25,\;50/50$) showed agglomerates consisted of particles in submicron, but those of $TiO_2/SiO_2=25/75$ and $SiO_2=100%$ were still bulky states. Specific surface area of the powders heat-treated at $600^{\circ}C$ for 1hr was increased with $SiO_2$ concents and their pore sizes were also depended on $SiO_2$ contents. The photocatalytic activity of $TiO_2/SiO_2=75/25$ heat-treated at $600^{\circ}C$ for 1hr was 0.240mo1/h.g-cat as $H_2$ evolution rate. This value was about 2.0 times that of P-25(Degussa P-25) as a standard photocatalyst.

• Archives of design research
• /
• v.12 no.1
• /
• pp.145-154
• /
• 1999

With the introduction of digital technology since the late 1970s, we have been shifting from the industrial era into the information age. New communication systems have changed our concept of reality. Korea has a wealthy communication heritage with its own language and alphabet. However, Korean typography today has struggled to keep its originality, and does not hold up well to international standards. Korean contemporary typography is not efficient for communicating. It is not orderly, organised and simple. It has currently become complicated and decorative. Moreover, many young designers are attracted by imitations of western trends. It is now time for Korea to reveal its own identity. How can it develop a new typographic language that is more sympathetic to Korean tradition\ulcorner How will Korean information design produce a contemporary style with international relevance that contributes to world culture\ulcorner This thesis will be developed a new Korean typographic language that relies more on Korean traditions. Simultaneously, in this thesis will be examined Swiss typography as a relevant style for a new Korean typography to incorporate. Swiss typography maintained a similar philosophy to Korean tradition with its emphasis on clarity and simplicity. This study will be explored the potential of creating a contemporary Korean typographic solution which combines the traditions of Korea with the clarity of Swiss typography. The first attitude of the new typographic language should focus on legibility. The second condition of the new typographic philosophy based on the ability of designers is interpretation of context. The third concept of the new language is founded on an objective, rational design attitude. The final mental attitude of the new typographic language should feel a deep obligation to traditions. It is crucial time for Korean alphabet to establish a relevant standard rather than goes uncritically with the international current. Korea has had worthy traditions. It is suggested that the answers to 'good design' lie in the study of Korea's own history. Simultaneously, the research of Swiss design which is a

• Journal of Dental Rehabilitation and Applied Science
• /
• v.28 no.2
• /
• pp.119-126
• /
• 2012

State of problem: Cement-retained implant-supported prostheses are routinely used in dentistry. The use of high strength cements has become more popular with the increasing confidence in the stability of the implant-abutment screw connection and the high survival rates of osseointegrated implants. No clinical data on retention of metal copings using CAD/CAM. To evaluate retention of metal copings using CAD/CAM system bonded to short titanium abutment with four different cements and compare retentive strength of metal copings with sandblasting or without sandblasting before cementation. Forty titanium abutment blocks were fabricated and divided into 4 groups of 10 samples each. Forty metal copings with occlusal hole to allow for retention testing were fabricated using CAD/CAM technology. The four cements were Fujicem(Fuji, Japan), Maxcem Elite(Kerr, USA), Panavia F2.0(Kurarary, Japan) and Superbond C&B(Sunmedical, Japan). The copings were cemented on the titanium abutment according to manufacture's recommendation. All samples were stored for 24h at 37oC in 100% humidity and tested for retention using universal testing machine(Instron) at a crosshead speed of 1.0mm/min. Force at retentive failure was recorded in Newton. The mode of failure was also recorded. Means and standard deviations of loads at failure were analyzed using ANOVA and Paired t-test. Statistical significance was set at P<0.05. Panavia F2.0 provided significantly higher retentive strength than Fujicem, Maxcem Elite(P<0.05). Sandblasting significantly increased bond strength(P<0.05). The mode of failure was cement remaining principally on metal copings. Within the limitation of this study, Panavia F2.0 showed significantly stronger retentive strength than Fujicem, Maxcem Elite(p<0.05). The Ranking order of the cements to retain the copings was Panavia F2.0, Fujicem = Maxcem Elite. Sandblasting significantly increased bond strength(P<0.05). The retentive strength of metal copings on implant abutment were influenced by surface roughness and type of cements.

• The Korean Journal of Air & Space Law and Policy
• /
• v.28 no.1
• /
• pp.3-54
• /
• 2013

Nowadays, major advanced countries in aviation technology are putting their effort to develop commercial and civil Unmanned Aircraft System(UAS) due to its highly promising market demand in the future. The market scale of commercial and civil UAS is expected to increase up to approximately 8.8 billon U.S. dollars by the year 2020. The usage of commercial and civil UAS covers various areas such as remote sensing, relaying communications, pollution monitoring, fire detection, aerial reconnaissance and photography, coastline monitoring, traffic monitoring and control, disaster control, search and rescue, etc. With the introduction of UAS, changes need to be made on current Air Traffic Management Systems which are focused mainly manned aircrafts to support the operation of UAS. Accordingly, the legislation for the UAS operation should be followed. Currently, ICAO's Unmanned Aircraft System Study Group(UASSG) is leading the standardization process of legislation for UAS operation internationally. However, some advanced countries such as United States, United Kingdom, Australia have adopted its own legislation. Among these countries, United States is most forth going with President Obama signing a bill to integrate UAS into U.S. national airspace by 2015. In case of Korea, legislation for the unmanned aircraft system is just in the beginning stage. There are no regulations regarding the operation of unmanned aircraft in Korea's domestic aviation law except some clauses regarding definition and permission of the unmanned aircraft flight. However, the unmanned aircrafts are currently being used in military and under development for commercial use. In addition, the Ministry of Land, Infrastructure and Transport has a ambitious plan to develop commercial and civil UAS as Korea's most competitive area in aircraft production and export. Thus, Korea is in need of the legislation for the UAS operation domestically. In this regards, I personally think that Korea's domestic legislation for UAS operation will be enacted focusing on following 12 areas : (1)use of airspace, (2)licenses of personnel, (3)certification of airworthiness, (4)definition, (5)classification, (6)equipments and documents, (7)communication, (8)rules of air, (9)training, (10)security, (11)insurance, (12)others. Im parallel with enacting domestic legislation, korea should contribute to the development of international standards for UAS operation by actively participating ICAO's UASSG.