• 한국의학물리학회지:의학물리
• /
• 제14권4호
• /
• pp.218-224
• /
• 2003

목 적：조사면 크기 및 차폐선반(tray)의 두께 등의 변화에 따른 차폐선반투과율(tray transmission factor) 변화를 측정함으로써 현재 임상적으로 쓰이고 있는 각 기계의 X-선 에너지마다의 단일한 차폐 선반투과율 값의 타당성에 관해 고찰해 보고자 한다. 또한 임상적으로 쓰이는 조사면 크기들의 분포를 분석하여 흔히 차폐선반투과율 결정시 표준조사면 크기로 사용되는 10${\times}$10 $\textrm{cm}^2$이 타당한지도 살펴보고자 한다. 대상 및 방법：조사면 크기의 변화와 차폐선반두께의 변화에 따른 차폐선반투과율의 변화를 측정해 보기 위해서 각 에너지(6 MV, 10 MV) 별로 0, 6, 8, 10, 12 mm 두께의 아크릴 차폐선반을 사용해서 방사선량을 측정하였는데 각 차폐선반두께 마다 방사선 조사면 크기는 5${\times}$5, 10${\times}$10, 15${\times}$15, 20${\times}$20, 25${\times}$25, 30${\times}$30, 35${\times}$35 $\textrm{cm}^2$ 등 7단계로 변화시키면서 측정해서 각 경우의 차폐선반투과율을 결정하였다. 팬톰 내의 측정깊이는 10 cm로 하였다. 또한 차폐선반투과율의 대표값 측정에 많이 쓰이는 표준조사면 크기 10${\times}$10 $\textrm{cm}^2$이 타당한지 확인해 보기 위해 2002년에 본원에서 치료받은 환자들의 조사면 크기 분포를 분석하였다. 결 과：6 MV에서 기준 조사면 크기인 10${\times}$10 $\textrm{cm}^2$와 최대조사면인 35${\times}$35 $\textrm{cm}^2$ 사이의 차폐선반투과율 증가를 살펴보면 6 mm 두께 차폐선반에서 0.517%, 8 mm 에서 0.836%, 10 mm에서 1.058%, 12 mm에서 1.066%였다. 10 MV에서 조사면 크기 10${\times}$10 $\textrm{cm}^2$와 35${\times}$35 $\textrm{cm}^2$ 사이의 차폐선반투과율 증가를 살펴보면 6 mm에서 0.615%, 8 mm에서 0.724%, 10 mm에서 0.730%, 12 mm에서는 1.158%였다. 각 경우에서 조사면 크기 20${\times}$20 $\textrm{cm}^2$ 이하에서는 차폐선반투과율이 표준 조사면(10${\times}$10 $\textrm{cm}^2$)에서의 값과 큰 차이가 없었으나 20${\times}$20 $\textrm{cm}^2$ 이상에서는 0.5% 이상, 30${\times}$30 $\textrm{cm}^2$ 이상에서는 1.0% 이상의 오차가 날 수 있었다. 한편 임상적으로 쓰이는 유효조사면 크기 중 79.2%가 10${\times}$10 $\textrm{cm}^2$과 20${\times}$20 $\textrm{cm}^2$ 사이에 분포하였다. 결 론：6 MV, 10 MV X선 각각에서 차폐선반투과율은 조사면 크기가 커질수록, 차폐선반두께가 작아질수록 각각 증가하였으며 차폐선반두께가 큰 경우가 작은 경우보다 조사면 크기에 따른 차폐선반투과율의 차이가 더 컸다. 또한, 임상에서 널리 쓰이고 있는 기준 조사면 크기에서의 단일한 차폐선반투과율은 조사면 크기 20${\times}$20 $\textrm{cm}^2$ 이내의 범위에서는 큰 오차가 없지만 30${\times}$30 $\textrm{cm}^2$ 이상 크기의 조사면에서는 1.0% 이상 오차가 날 수 있다. 따라서 각 병원별 큰 조사면에서의 차폐선반투과율의 측정치를 확보해서 필요시에 사용해야 할 것으로 사료된다.

• 한국보육지원학회지
• /
• 제13권1호
• /
• pp.19-41
• /
• 2017

Objective: This study aimed to provide policy implications by studying the class size of early childhood education institutes. Methods: By looking through researches, the educational influence of class size was examined. By using the latest statistical data, class size standard and status were compared. After class size perception in the field was considered and the main results of advanced researches were summarized and analyzed, the actual condition of class size was diagnosed. Furthermore, the national research trend was analyzed. Results: First, class size was an influencing factor on young children and teachers and its importance was reconfirmed. Second, as for standard in relation to class size in Korea, the maximum class size and teacher-child ratio were not presented together. In respect of overseas standards, infancy has similar standards, but early childhood has a little higher ratio. In the educational fields, there was growing awareness that class size should be modified. Third, there were not enough domestic researches on class size and they tended to be biased in terms of the method, targets, and contents. Conclusion/Implications: It is suggested that it is necessary to establish a class size policy for future early childhood education institutes, to implement a system, and to perform follow-up studies.

• 산업경영시스템학회지
• /
• 제10권16호
• /
• pp.27-38
• /
• 1987

This paper develops a standard time table using STD(Standard Tine Data) Technique in multi-product and one-unit production systems. STD leads to greater consistency between similar jobs. The constant-time and special elements will always be the same even though they pertain to different part numbers. Actually, the standards will very based on the size of the variable elements that are in control of the time. A real-field example is presented.

• 한국지반환경공학회 논문집
• /
• 제12권9호
• /
• pp.47-54
• /
• 2011

본 연구에서는 NATM으로 시공되는 산악터널의 시공과정에서 실측된 여굴, 숏크리트의 리바운드 및 투입율에 대한 분석을 실시하였다. 터널굴착 직후 굴착단면에 대한 여굴 크기를 조사한 결과 평균 여굴의 크기는 약 28.5cm 이며, 허용 여굴의 약 260%의 값을 보였다. 숏크리트의 리바운드는 평균 약 7.2% 정도로 측정되었는데 이는 일반적인 설계규정인 15% 보다 작은 값이다. 여굴 및 숏크리트 타설 중에 발생한 리바운드로 인하여 터널공사에 실제로 투입된 숏크리트 물량은 설계대비 약 116.5%의 값을 보였다. 자료분석에 의하면 숏크리트의 설계대비 실제투입율은 RMR(Rock Mass Rating)이나 터널 표준지보패턴과는 어느 정도 상관관계가 있는 것으로 나타났으나, 이에 비해 여굴은 RMR 값이나 표준지보패턴과는 상관성이 낮은 것으로 분석되었다. 따라서 표준지보패턴만에 의해 허용 여굴의 크기를 규정하는 현행 터널설계기준에 대한 재검토가 필요할 것으로 판단된다. 본 연구 결과를 통하여 분석된 여굴 및 숏크리트 투입량에 대한 고찰결과를 보고하고자 한다.

• 한국작물학회지
• /
• 제47권
• /
• pp.135-139
• /
• 2002

The standard of quality was required to promote the consumption of potato and produce the high quality processing products. It will contribute the stability for processing products and the marketability of potato. The quality was determined based on size of tuber and content of dry matter. Even though the criteria of potato quality was involved many characters of tubers, the most important things were grading and packing of potato to create the consumption. For processing of raw materials, the standard of tubers had create between producer and processor according to size of tuber and content of dry matter. The evaluation of quality was performed over the standard to enhance the control of quality. In addition, the seed potato should be taken the evaluation to disease in the field during the period of cultivation and managed under the strict regulation in storage before release to farmer. Then, the producer of seed potato will make a good relationship to farmer with high quality tubers.

• 한국디지털정책학회:학술대회논문집
• /
• 한국디지털정책학회 2007년도 춘계학술대회
• /
• pp.127-143
• /
• 2007

As the informationized society develops, for companies to be industrially competitive in global competition, innovation of business administration through informationization is a nation-wide task that must be driven. Small-to-mid size companies also tend to recognize the need for informationization and build the information systems, improving their informationization levels. To reduce errors in bringing in and running the information systems and increase efficiency In using them, the need for the standard and guide for informationization in small-to-mid size companies has increased. Accordingly, the national office of small and medium business administration has developed the informationized management system (IMS) certification standard in order to provide a national motive to secure the means for management innovation of small-to-mid size companies and have them recognize informationization as a business strategy. Now, there arises the need for the IMS certification standard, which was developed in early 2000, due to changes in environments of small-and-medium businesses and problems that have been revealed in field applications. In this research, we have examined the current situations of informationization in small-and-medium businesses that were revealed by the 2005 survey on the levels of informationization in small and medium business, have drawn the problems that have occurred in the process of applying the IMS in many small-to-mid size companies, have devised the measures against those problems, and have proposed a new IMS certification standard that reflects those measures. This research has proposed only the direction for development of the IMS certification standard. Future researches should deal with detailed items and criteria for evaluation and continuous improvement of them.

• 한국농공학회:학술대회논문집
• /
• 한국농공학회 2001년도 학술발표회 발표논문집
• /
• pp.228-235
• /
• 2001

For standard size of farmland in Korea is small, we have to consume huge labor for cultivation and efficiency of machine is low. We practice the project, which make size of farmland enlarge. For many factors have to consider in design process in case of large-scale farmland, there are difficulties for comparing alternatives if we design it manually. So we need to techniques for establishing various alternatives and choosing the optimum design by the computer. In this study, fixing the boundary of project using the RGIS (Rural Geographical Information System) which standard electronic map in Korea. In the boundary, we analysis the many characteristics of farm land, optimize the adjustment process of field unit of farmland. In this process, we develop automatic farmland division techniques. The results of adapting the developed system show the usefulness to enlarge the size of farmland about 200%.

• 대한기계학회논문집B
• /
• 제23권3호
• /
• pp.398-407
• /
• 1999

In the present image processing technique, the concept of the gradient indicator(GI) has been introduced to find out the depth-of-field in sizing large particles ranging from $30{\mu}m$ to $30{\mu}m$ where using of the concept of the normalized contrast value(VC) is not appropriate. The gradient indicator is defined as the ratio of the local value to the maximum possible value of the gray-level gradient in an image frame. The gradient indicator decreases with the increases of the particle size and the distance from the exact focal plane. A particle is considered to be in focus when the value of the gradient indicator at its image boundary stays above a critical value. This critical gradient indicator($GI_{critical}$) is defined as the maximum gradient indicator($GI_{max}$) subtracted by a constant ${\Delta}GI$ which is to account for the particle-size effect. In the present ca.so, the value of ${\Delta}GI$ was set to 0.28 to keep the standard deviation of the measured particles mostly within 0.1. It was also confirmed that, to find the depth-of-field for small particles(${\leq}30{\mu}m$) with the same measurement accuracy, tho concept of the critical normalized contrast($VC_{critical}$) is applicable with 85% of the maximum normalized contrast value($VC_{max}$). Finally, the depth-of-field was checked for the size range between $10{\mu}m$ and $300{\mu}m$ when the both in-focus criteria ($GI_{critical}$ and $VC_{critical}$) were adopted. The change of the depth-of-field with the particle size shows good linearity in both the VC-applicable and the GI-applicable ranges with a reasonable accuracy.

• 대한방사선치료학회지
• /
• 제12권1호
• /
• pp.91-104
• /
• 2000

Recently linear accelerator in radiation therapy in asymmetric field has been easily used since the improvement and capability of asymmetrical field adjustment attached to the machine. It has been thought there have been some significant errors in dose calculation when asymmetrical radiation fields have been utilized in practice of radiation treatments if the fundamental data for dose calculation have been measured in symmetrical standard fields. This study investigated how much the measured data of dose distributions and their isodose curves are different between in asymmetrical and symmetrical standard fields, and how much there difference affect the error in dose calculation in conventional method measured in symmetrical standard field. The distributions of radiation dose were measured by photon diode detector in the water phantom (RFA-300P, Scanditronix, Sweden) as tissue equivalent material on utilization of 6 MV linear accelerator with source surface distance (SSD) 1000 mm. The photon diode detector has the velocity of 1 mm per second from water surface to 250 mm depth in the field size of $40mm{\times}40mm\;to\;250mm{\times}250mm\;symmetric\;field\;and\;40mm{\times}20mm\;to\;250mm{\times}125mm$ asymmetrical fields. The measurements of percent depth dose (PDD) and subsequent plotting of their isodose curves were performed from water surface to 250mm dmm from Y-center axis in $100mm{\times}50mm$ field in order to absence the variability of depth dose according to increasing field sizes and their affects to plotted isodose curves. The difference of PDD between symmetric and asymmetric field was maximum $4.1\%\;decrease\;in\;40mm{\times}20mm\;field,\;maximum\;6.6\%\;decrease\;in\;100mm{\times}50mm\;and\;maximum\;10.2\%\;decrease\;200mm{\times}100mm$, the larger decrease difference of PDD as the greater field size and as greater the depth, The difference of PDD between asymmetrical field and equivalent square field showed maximum $2.4\%\;decrease\;in\;60mm{\times}30mm\;field,\;maximum\;4.8\%\;decrease\;in\;150mm{\times}75mm\;and\;maximum\;6.1\%\;decrease\;in\;250mm{\times}125mm$, and the larger decreased differenced PDD as the greater field size and as greater the depth, these differences of PDD were out of $5\%$ of dose calculation as defined by international Commission on radiation unit and Measurements(ICRU). In the dose distribution of asymmetrical field (half beam) the plotted isodose curves were observed to have deviations by decreased PDD as greater as the blocking of the beam moved closer to the central axis, and as the asymmetrical field increased by moving the block 10 mm keeping away from the central axis, the PDD increased and plotted isodose curves were gradually more flattened, due to reduced amount of the primary beam and the fraction of low energy soft radiations by passing thougepth in asymmetrical field by moving independent jaw each 10 h beam flattening filter. As asymmetrical radiation field as half beam radiation technique is used, the radiation dosimetry calculated in utilizing the fundamental data which measured in standard symmetrical field should be converted on bases of nearly measured data in asymmetrical field, measured beam data flies of various asymmetrical field in various energy and be necessary in each institution.

• 대한방사선치료학회지
• /
• 제14권1호
• /
• pp.175-186
• /
• 2002

The purpose of this study is directly measure and evaluate about absorbed dose change according to nominal energy and electron cone or medical accelerator on isodose curve, percentage depth dose, contaminated X-ray, inhomogeneous tissue, oblique surface and irradiation on intracavitary that electron beam with high energy distributed in tissue, and it settled standard data of hish energy electron beam treatment, and offer to exactly data for new dote distribution modeling study based on experimental resuls and theory. Electron beam with hish energy of $6{\sim}20$ MeV is used that generated from medical linear accelerator (Clinac 2100C/D, Varian) for the experiment, andwater phantom and Farmer chamber md Markus chamber und for absorbe d dose measurement of electron beam, and standard absorbed dose is calculated by standard measurements of International Atomic Energy Agency(IAEA) TRS 277. Dose analyzer (700i dose distribution analyzer, Wellhofer), film (X-OmatV, Kodak), external cone, intracavitary cone, cork, animal compact bone and air were used for don distribution measurement. As the results of absorbed dose ratio increased while irradiation field was increased, it appeared maximum at some irradiation field size and decreased though irradiation field size was more increased, and it decreased greatly while energy of electron beam was increased, and scattered dose on wall of electron cone was the cause. In percentage depth dose curve of electron beam, Effective depth dose(R80) for nominal energy of 6, 9, 12, 16 and 20 MeV are 1.85, 2.93, 4.07, 5.37 and 6.53 cm respectively, which seems to be one third of electron beam energy (MeV). Contaminated X-ray was generated from interaction between electron beam with high energy and material, and it was about $0.3{\sim}2.3\%$ of maximum dose and increased with increasing energy. Change of depth dose ratio of electron beam was compared with theory by Monte Carlo simulation, and calculation and measured value by Pencil beam model reciprocally, and percentage depth dose and measured value by Pencil beam were agreed almost, however, there were a little lack on build up area and error increased in pendulum and multi treatment since there was no contaminated X-ray part. Percentage depth dose calculated by Monte Carlo simulation appeared to be less from all part except maximum dose area from the curve. The change of percentage depth dose by inhomogeneous tissue, maximum range after penetration the 1 cm bone was moved 1 cm toward to surface then polystyrene phantom. In case of 1 cm and 2 cm cork, it was moved 0.5 cm and 1 cm toward to depth, respectively. In case of air, practical range was extended toward depth without energy loss. Irradiation on intracavitary is using straight and beveled type cones of 2.5, 3.0, 3.5 $cm{\phi}$, and maximum and effective $80\%$ dose depth increases while electron beam energy and size of electron cone increase. In case of contaminated X-ray, as the energy increase, straight type cones were more highly appeared then beveled type. The output factor of intracavitary small field electron cone was $15{\sim}86\%$ of standard external electron cone($15{\times}15cm^2$) and straight type was slightly higher then beveled type.