• MALSORI
• /
• no.27_28
• /
• pp.89-109
• /
• 1994

This thesis compares the duration aspect of the Daegu tongue with that of standard Korean. In the former study on the rhythm of standard Korean, one of the purposes of the study was to compare it with dialects. This thesis is the first attempt to do that. For this purpose, this thesis proceeds as follows. After Introduction, Chapter 2 surveys the former study. Chapter 3 deals with the materials, method and results of the experiment. Chapter 4 analyzes and interprets the results of the experiment, In Conclusion, the most Prominent fact is that the results of the experiment fall short of Daegu tongue speakers' expectations. The Daegu tongue is generally considered as a 'tone language.' And as Daegu tongue speakers sensitively recognize pitch, they think that they quickly say the syllables between the Pitch stressed syllables, whereas standard Korean speakers say those syllables relatively slowly, But in this experiment, which deals with only duration ignoring Pitch, their assumption is proved to be false.

• Proceedings of the KSPS conference
• /
• 1996.10a
• /
• pp.379-383
• /
• 1996

This paper compares the duration aspect of Daegu tongue with that of standard Korean. In the former study on the rhythm of standard Korean, one of the purposes of the study was to compare it with dialects. This paper is the first attempt to do that. For this purpose, this paper proceeds as follows. After Introduction, Chapter 2 surveys the former study. Chapter 3 deals with the materials, method and results of the experiment. Chapter 4 analyzes and interprets the results of the experiment. In Conclusion, the most prominent fact is that the results of the experiment fall short of Daegu tongue speakers' expectations. Daegu tongue is generally considered as "tone language." And as Daegu tongue speakers sensitively recognize pitch, they think that they quitckly say the syllables between the pitch stressed syllables, whereas standard Korean speakers say those syllables relatively slowly. But in this experiment, which deals with only duration ignoring pitch, their assumption is proved to be false.

• International Journal of Oral Biology
• /
• v.46 no.2
• /
• pp.94-97
• /
• 2021

The purpose of this study was to introduce a new in vitro method for evaluating the antimicrobial activity of toothpaste, reflecting the actual toothbrushing time and the dilution of toothpaste by salivation. We designed three experimental groups and one negative control group. The experimental groups were (1) 90 μL of toothpaste + 10 μL 1X phosphate-buffered saline (PBS, 9/10 dilution group), (2) 50 μL of toothpaste + 40 μL 1X PBS (1/2 dilution group), and (3) 25 μL of toothpaste + 65 μL 1X PBS (1/4 dilution group). During toothbrushing, saliva is continuously secreted into the oral cavity and the toothpaste concentration is diluted over time during toothbrushing. Therefore, the 1/2 and 1/4 dilution experimental groups were added. The negative control group was toothpaste diluted 20,000-fold with 1X PBS. Miracle Fresh Doctor toothpaste and Streptococcus mitis KCOM 1350, Prevotella intermedia KCOM 1107, Fusobacterium nucleatum subsp. polymorphum KCOM 1322, and Aggregatibacter actinomycetemcomitans KCOM 1306 were used as the toothpaste and target bacterial strains, respectively. The number of bacterial cells plated on agar plates in the negative control group was 1,000 CFU. If the number of colonies on the experimental group plate was less than one, the treatment was considered to have > 99.9% bactericidal activity. These results suggest that this new in vitro method for antimicrobial evaluation could be used as the standard method for testing the antimicrobial activity of toothpaste.

• Journal of Welding and Joining
• /
• v.18 no.3
• /
• pp.68-75
• /
• 2000

The incomplete penetration(IP) discontinuity in butt joint weld, which is detected during safety analysis of the steel bridge by nondestructive evaluation(NDE) method, is classified as unacceptable defect according to the NDE codes and standards. In fact, there are a little allowance in butt joint weld in the view point of design criterion, and also detected IP discontinuity should be classified and evaluated for the fatigue strength and residual life estimation. In this study, we performed fatigue test to evaluate the fatigue strength of high strength steel(SWS490A) containing IP discontinuities in various size, the results compared and classified according to the bridge construction standard specification which published by korea administration of construction and traffic. Experimental results could be used to evaluate and estimate the IP discontinuities considering different stress range in butt joint bridge weld during periodic safety inspection.

• Proceedings of the Korea Concrete Institute Conference
• /
• 2006.05b
• /
• pp.613-616
• /
• 2006

Development of construction technology and various condition is realized by high-rise buildings and so concrete placing by pressure pump has been developed in with the trend of large-size and high-rise building. So, it is judged that reservation of the basic data for standard of quality control standard Code by the prediction and this to a quality change exact here is urgent. In this study it is going to carry out experimental research for a physical-properties change searching examination of the concrete by the after pressure change factor which does not become hard by the pumping method of construction.

• Korean Management Science Review
• /
• v.24 no.2
• /
• pp.73-80
• /
• 2007

Robust Design(RD) is a cost-effective methodology to determine the optimal settings of control factors that make a product performance insensitive to the influence of noise factors. To better facilitate the robust design optimization, a dual response surface approach, which models both the process mean and standard deviation as separate response surfaces, has been successfully accepted by researchers and practitioners. However, the construction of response surface approximations has been limited to problems with only a few variables, mainly due to an excessive number of experimental runs necessary to fit sufficiently accurate models. In this regard, an innovative response surface approach has been proposed to investigate robust design optimization problems with larger number of variables. Response surfaces for process mean and standard deviation are partitioned and estimated based on the multi-level approximation method, which may reduce the number of experimental runs necessary for fitting response surface models to a great extent. The applicability and usefulness of proposed approach have been demonstrated through an illustrative example.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.57 no.3
• /
• pp.344-353
• /
• 2008

To apply the appropriate new grounding system to domestic power system, safety has to be guaranteed under the given circumstances. It is not possible to decide the safety of grounding systems by the experimental test because safety experiments directly relate to the human life and the installed electric machines. Therefore, the computer simulation program to decide the safety of grounding systems based on the IEC standard systems, has to be developed. This paper proposes the computer simulation based method to decide the safety of grounding system with the concepts of touch voltage, step voltage, human resistivity, and applied electric current according to the several conditions of human body located in the corresponding grounding systems. The proposed method is implemented by Matlab/Simulink and Visual C++ programming tools for its visualization.

• Proceedings of the Korea Concrete Institute Conference
• /
• 2000.10a
• /
• pp.167-172
• /
• 2000

There are a variety of factors affecting measured compressive strength of hardened concrete. One of them is the end surface condition of concrete specimen. So, many capping methods have been developed for the specimen to meet the end condition requirement of ASTM C 39. A series of experimental strength comparison study was carried out using several representative capping methods, including pad capping method which is one of unbonded elastomeric capping system and was newly adopted in the ASTM standard. A comparison was also focused on their economy, convenience, harmfulness, etc.

• Proceedings of the IEEK Conference
• /
• 2000.11d
• /
• pp.65-68
• /
• 2000

This paper describes an approach for extracting invariant features using a view-based representation and recognizing an object with a high speed search method in FLIR. In this paper, we use a reformulated eigenspace technique based on robust estimation for extracting features which are robust for outlier such as noise and clutter. After extracting feature, we recognize an object using a partial distance search method for calculating Euclidean distance. The experimental results show that the proposed method achieves the improvement of recognition rate compared with standard PCA.

• The Transactions of the Korean Institute of Electrical Engineers
• /
• v.43 no.5
• /
• pp.770-778
• /
• 1994

In this paper, the photovoltaic inverter system with instantaneous sinusoidal current tracking control is proposed to improve the utilization factor of photovoltaic power system which would be connected utility interactive system. The proposed inverter is designed to track maximum power point by two-state value control method and utility interactive operation, and to decrease output harmonics component. Optimal operating region is described by state space averaging method, and present tracking condition of standard guide line. The experimental result shows the effectiveness of inverter system using the instantaneous control method.