• 대한기계학회논문집
• /
• 제13권5호
• /
• pp.862-874
• /
• 1989

본 연구에서는 반경법 진원도 측정기의 회전정도와 편심에 의한 영향을 제거 하여 시험편의 형상오차와 측정기 자체의 오차특성을 분리함으로써 진원도 측정의 정도를 향상시킬 수 있는 방법에 대하여 검토하였다. 진원도의 표시법으로는 최근 최소영역법에 의해 규정되는 경우가 많으나 이는 일반적으로 많은 연산시간을 요구 하므로 비경제적인 면이 있다.

• The Korean Journal of Physiology and Pharmacology
• /
• 제16권2호
• /
• pp.97-106
• /
• 2012

The pharmacokinetics/pharmacodynamics analysis software NONMEM$^{(R)}$ output provides model parameter estimates and associated standard errors. However, the standard error of empirical Bayes estimates of inter-subject variability is not available. A simple and direct method for estimating standard error of the empirical Bayes estimates of inter-subject variability using the NONMEM$^{(R)}$ VI internal matrix POSTV is developed and applied to several pharmacokinetic models using intensively or sparsely sampled data for demonstration and to evaluate performance. The computed standard error is in general similar to the results from other post-processing methods and the degree of difference, if any, depends on the employed estimation options.

• 응용통계연구
• /
• 제28권3호
• /
• pp.477-483
• /
• 2015

본 연구에서는 계속조사에서 과거의 조사결과에서 얻은 추정값의 상대표준오차를 이용한 표본크기 결정 문제에 대하여 실제 사업체 조사자료를 활용하여 살펴보았다. 통계청 사업체 조사결과 중 건설업을 모집단으로 이용하여 표본크기를 500에서 3,000까지 500씩 증가시켜가면서 표본을 1,000개씩 단순임의추출 또는 층화추출하여 추출된 각 표본으로부터 상대표준오차들의 사분위수를 계산하였다. 그리고 이들 값들을 토대로 계속조사에서 시점 (t-1)에서의 상대표준오차를 이용한 시점 t에서의 표본크기를 추출법에 따라 구하였다. 그 결과 단순임의추출의 경우는 층화추출의 경우보다 시점 (t-1)에서의 상대표준오차들의 크기에 따라 표본크기가 매우 크게 차이가 나타남을 알 수 있었으며, 층화추출의 경우도 어떻게 층화를 하느냐에 따라 표본크기에 차이가 있을 수 있음을 알 수 있었다. 따라서 계속 조사에서 과거의 조사결과에서 얻은 추정값의 상대표준오차를 이용한 표본크기 식을 활용하는데 있어서 세심한 주의가 필요함을 확인할 수 있었다.

• 한국정밀공학회지
• /
• 제18권7호
• /
• pp.46-52
• /
• 2001

This study describes the precision control of the torque standard machine using a self-tuning fuzzy controller. The torque standard machine should generate the accurate torque for calibrating a torque sensor. In order to reduce the relative expanded uncertainty of the torque standard machine, when a weight is hanged to the end of the torque arm for generating the torque, the sloped torque arm should be accurately controlled to the horizontal level. If the slope of the torque arm is larger from the inaccurate control, the uncertainty of the torque standard machine due to control will be larger. This applies the inaccurate torque to a torque sensor to calibrate, and the measuring error of the torque sensor generate from it. Therefore the torque arm of the torque standard machine is accurately controlled. In this paper, the self-tuning fuzzy controller was designed using a fuzzy theory, and the torque arm of the torque standard machine was accurately controlled. The control gain of the fuzzy controller, that is the membership function size of the error, the membership function size of the error change and the membership function size of the controller were determined from the self-tuning. The control results of the torque standard machine were the overshoot within 0.0076mm, the rise time within 16.70sec and the steady state error within 0.0076mm.

• Korean Journal of Mathematics
• /
• 제22권3호
• /
• pp.429-441
• /
• 2014

In this work we study two a posteriori error estimators of hierarchical type for lowest-order mixed finite element methods. One estimator is computed by solving a global defect problem based on the splitting of the lowest-order Brezzi-Douglas-Marini space, and the other estimator is locally computable by applying the standard localization to the first estimator. We establish the reliability and efficiency of both estimators by comparing them with the standard residual estimator. In addition, it is shown that the error estimator based on the global defect problem is asymptotically exact under suitable conditions.

• Spatial Information Research
• /
• 제11권1호
• /
• pp.23-32
• /
• 2003

GIS분야에서 불규칙삼각망은 저수량계산, 지형분석 등에 활용되며 표고, 경사, 방향 정보를 가지고 있기 때문에 처리시간과 용량이 많이 소요된다. 등고선을 활용하여 TIN을 구축하는 과정에서, 선의 단순화를 위해 사용하는 weed tolerance는 등고선상의 샘플 간격에 영향을 미치게 된다. 본 연구에서는 다양한 크기의 weed tolerance에 따른 TIN의 처리시간과 용량을 계산하였으며, 적절한 weed tolerance를 제시하기 위해 TIN으로부터 생성된 수치표고모형의 표준오차를 평가하여 허용오차 범위를 만족하는 weed tolerance를 결정하였다. 평가결과, DEM 표준오차 5m를 만족하는 TIN의 weed tolerance 는 70m였으며, DEM의 해상도는 20m로 나타났다.

• 대한수의학회지
• /
• 제14권2호
• /
• pp.173-177
• /
• 1974

Thirty of healthy non-pregnant Holstein cows being raised in the vicinity of Daejeon, which had been delivered of calves 4 to 6 times since they were imported to Korea, were selected with the purpose of serum chemical analysis. Total protein, albumin, globulin, total cholesterol, urea nitrogen and glucose and A/G ratio were investigated. The results of present investigation were summarized as follows: 1. Ranges and mean values (with standard error) of total protein, albumin and globulin were 6.87~8.58g/100ml, $7.75{\pm}0.60g/100ml$; 2.6~3.5g/100ml(37.1~45.0%), $3.26{\pm}0.27g/100ml$(40.1%); and 3.78~5.48g/100ml(55.1~64.6%), $4.51{\pm}0.43g/100ml$(58.1%), respectively. 2. Range and mean value (with standard error) of A/G ratio were 0.52~0.86 and 0.73~0.093. 3. Range and mean value (with standard error) of glucose were 35~50mg/100ml and $45.2{\pm}9.1mg/100ml$. 4. Range and mean value(with standard error) of total cholesterol were 122~228mg/100ml and $194.6{\pm}11.1mg/100ml$. 5. Serum urea nitrogen showed that the range of 10.5~15.1mg/100ml and the mean value(with standard error) of $12.7{\pm}1.5mg/100ml$.

• Journal of the Korean Statistical Society
• /
• 제25권1호
• /
• pp.1-24
• /
• 1996

In selecting a final tree, Breiman, Friedman, Olshen, and Stone(1984) compare the prediction risks of a pair of tree, where one contains the other, using the standard error of the prediction risk of the larger one. This paper proposes an approach to selection of a final tree by using the standard error of the difference of the prediction risks between a pair of trees rather than the standard error of the larger one. This approach is compared with CART's for simulated data from a simple regression model. Asymptotic results of the approaches are also derived and compared to each other. Both the asymptotic and the simulation results indicate that final trees by CART tend to be smaller than desired.

• 전기학회논문지
• /
• 제56권5호
• /
• pp.926-932
• /
• 2007

A recently developed methods for on-site calibration of the current transformer (CT) comparator system have been reviewed in the paper. The method utilizes several traveling standards, which consist of the CT, non-reactive standard resistors, wide ratio error CT, and shunt resistors. The traveling CT is used for absolute evaluation of a standard CT belonging to industry. The non-reactive standard resistors and a wide ratio error CT are used for the linearity check of errors in the current comparator. The shunt resistors are used for evaluation of CT burden of industry.

• 전기학회논문지
• /
• 제56권7호
• /
• pp.1268-1274
• /
• 2007

A recently developed methods for the on-site calibration of the voltage transformer (VT) comparator system have been reviewed in the paper. The method utilizes the several traveling standards consisting of the VT, the non-reactive standard resistors, the wide ratio error VT, and the decade resistors. The VT is used for the absolute evaluation of a standard VT belonging to the industry. The non-reactive standard resistor and wide ratio error VT are used for the linearity check of errors in the voltage comparator of the industry. The decade resistors are used for evaluation of a VT burden of the industry.