• Journal of the Korean Geotechnical Society
• /
• v.24 no.11
• /
• pp.43-53
• /
• 2008

The rock mass classification systems used in Korea are not standardized. And also the criteria values differ between agencies. So different opinions for rock mass classification can occur among engineers who participate in each design process. In this research, a new rock mass classification system was suggested to correct these problems. For this purpose, the criteria used in the Korean agencies were compared with the criteria used in foreign agencies and standard criteria were selected. Thereafter rational and objective criteria values were suggested quantitatively for the new classification system.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.13 no.1 s.53
• /
• pp.145-151
• /
• 2009

The span deflection among the monitoring items of bridge measurement system in real time is representative behaviour and important index of superstructure condition. the limit of span deflection in Standard Specifications for Highway Bridge in Korea has been applied to the method that is making the management-criteria for span deflection in bridge measurement system. But the limit concern mainly serviceability of divers. So it is difficult to find the safety factor of the limit from the viewpoint of bridge safety. This study estimated the safety factor of the limit of span-deflection in Standard Specifications for Highway Bridge in Korea from the viewpoint of bridge safety by the indoor structural test.

• Proceedings of the Safety Management and Science Conference
• /
• 2013.04a
• /
• pp.19-29
• /
• 2013

Slips and falls are associated with many occupational injuries in Korea. It is also estimated that slipping are major contributors to slip, trip and fall injury burden. So "LOCAL RULE ON OCCUPATIONAL SAFETY AND HEALTH STANDAR D" must be improved, especially article 3(prevention of slip, trip and fall). The primary purpose of the present study is to determine if, and to what extent, the standard could be improved in present environment. In order to fulfill our objective, the another regulation in Korea and foreign countries were investigated and reviewed. Many kind of standard, mandatory documents and guideline were also reviewed. And then, regulations, standard, guideline etc. reviewed were compared with each others. The article 3 was revised as below. 1. The floors of the traffic route in workplace shall have no hole or slope, or be uneven or slippery so as, in each case, to expose employees to slip, trip and fall risk, except if adequate measures have been taken to prevent a employees falling. 2. The employer shall design, install and fix the drain for effective drainage if fluid contaminants were frequently occurred. So far as is reasonably practicable, An employer shall keep the workplace clean, sanitary, and dry so that employees won't have any risk to tripping or slipping at the workplace. 3. To facilitate cleaning, every floor, workplace, and passageway shall be, so far as is reasonably practicable, kept free from protruding objects, splinters, holes, etc. Also, some criteria was developed in this study. Standard and criteria developed in this study will help to prevent slip, trip, and fall injuries.

• Journal of The Korea Institute of Healthcare Architecture
• /
• v.22 no.1
• /
• pp.29-37
• /
• 2016

Purpose: Since the end of the 1990s the question of detecting blind and vision-impaired persons' tactile walking surface indicators have been rasied, the study of detecting tactile walking surface indicators has been started in Japan, German, and Sweden. Through the study, Japan, German, Sweden, and international's standard was revised. The Korean standard of tactile walking surface indicators was revised in 2013, the remarkable point was missed. Therefore, this study suggested deriving a range of types and dimensions of tactile walking surface indicators reasonable, and presenting the design principles for the development of new tactile walking surface indicators though domestic and international literature review. Method: This study was proceeded by comparison analysis of results from various tactile walking surface indicators' literature review from Japan, German, and Sweden, the most suitable range of types and dimensions was abstracted. Then, the range of types and dimensions was compared to the international standards and international reference standard, the ground rules were confirmed to apply new tactile walking surface indicators design. Results: Rationally, the wide and diameter of projecting line and projecting point should be downsized in order to improve detecting blind and vision-impaired persons' tactile walking surface indicators. And with same purpose, the ratio of the wide and diameter of projecting line and projecting point should be decided. The design of the tactile walking surface indicators in addition to the size and spacing of the protrusions should be to reflect the common elements that have been suggested a number of standard criteria. Implication: In this study, the design principles was derived through test results and theoretical studies, and new tactile walking surface indicators would need to be validated in local user.

• Journal of Fisheries and Marine Sciences Education
• /
• v.20 no.1
• /
• pp.68-77
• /
• 2008

The purpose of this study is to examine the organization of the standard liberal arts curriculum in accordance with the academic credit bank system (ACBS). With the growth of the system, the standard curriculum of the ACBS turned out to have many problems which have to be solved for securing and maintaining the quality of the system. In an attempt to improve the standard liberal arts curriculum of the ACBS, the study analyzed the problems of standard liberal arts curriculum of the ACBS according to three criteria: the organization of subjects in the six liberal arts curriculum areas, the completion of liberal arts and the exchange subjects between majors and the liberal arts. Based on the results of the analysis, the study suggests ways to improve standard liberal arts curriculum. In the future, research needs to be conducted to explore ways to implement the proposed standard liberal arts curriculum of the ACBS in real contexts.

• Journal of the Korean Society of Systems Engineering
• /
• v.12 no.1
• /
• pp.7-23
• /
• 2016

Plant engineering industry is considered as a key industry which will drive the future of Korea. However, Korean plant engineering companies have recently made huge losses in overseas businesses and the lack of engineering capability is pointed out as a main cause of this situation. Unlike Korean plant engineering companies, world leading engineering companies such as Flour and Bechtel have their own systems Engineering Standards/Guides ensuring successful fulfillments of the concept and basic design processes. An engineering standard for an organization is an essential means to shorten the time for engineering design, to maintain the engineering quality and to secure the engineering efficiency in the development of the complex system. Korean plant engineering companies'lack of engineering capability comes from the absence of the engineering standard. In the paper, we have developed a steel-making plant engineering standard based on a systems engineering standard. We chose both ISO/IEC/IEEE 15288 and NASA SE Handbook as main reference standards. First, we have introduced a life-cycle definition and a physical hierarchy of a general steel-making plant. Then we have introduced detailed engineering processes of each life-cycle stage. The full scope of the study was from the feasibility study to the basic design but in the paper, we have only introduced detailed engineering processes and exit criteria for the feasibility study and the concept design.

• Health Policy and Management
• /
• v.20 no.2
• /
• pp.1-16
• /
• 2010

Background : Clinical practice guidelines are an increasingly familiar part of clinical practice. Moreover, rigorously developed evidence based guidelines has been widely used. However, in Korea, some of published documents as clinical practice guidelines have shown considerable disparity in structure, contents and quality. This is mainly because there is no consensus on the definition and quality standard of clinical practice guidelines. The purpose of this study was to draw consensus on the definition and the quality standard about clinical practice guidelines. Method : We developed a questionnaire about the definition of clinical practice guidelines with inclusion criteria(23 items) and the quality standard(30 items). We selected 9 experts who had prior experience in developing and implementing guidelines. Rating methods for appropriateness of items were adopted from the RAND method. Consensus was drawn in three rounds. Results : Of the 47 items agreed, 40 items were determined to be appropriate. Clinical practice guidelines were defined as "scientifically and systematically developed statements to assist practitioners and patients on making decisions about appropriate health care for specific clinical circumstances." Narrative reviews, systematic reviews or health technology assessment without recommendations, translation of foreign guidelines, guidelines for patients only and training manuals were not considered as clinical practice guidelines. For the quality standard of clinical practice guidelines, 27 items were deemed necessary. Conclusions : The consensus on the definition with inclusion criteria and the quality standard of clinical practice guidelines carries an important meaning as the first attempt to draw a general agreement in our society. The unique achievement of the consensus reflects the current status of clinical practice guidelines that there has been a high tendency to adapt foreign guidelines. We hope efforts of this kind will continue to bring improvement in clinical practice guidelines.

• Journal of Korean Academy of Nursing Administration
• /
• v.9 no.1
• /
• pp.89-101
• /
• 2003

Purpose : this study was to examine the effect of using a nursing standards for the quality of nursing care in musculo-skeletal patients. Method : The approach to nursing quality assurance evaluation was selected process-outcome framework. The subjects ware 100 case of musculo-skeletal patients in orthopedic surgery nursing care unit of E. university hospital in seoul. The data of a control group were collected from 23 December 2001 to 20 March 2002 and an experimental group were collected from 1 June to 25 August 2002. The instruments used for this study were a nursing care standards in musculo-skeletal disorder patients developed by the investigator and an evaluation tool for the quality of nursing care in orthopedic surgery patients developed by soon-ook Choi in 1995. It's reliability is Cronbach alpha=.8628. The data were analyzed by means of $x^1$-test, t-test, ANOVA with SPSS program. Results : This study are as fellows : 1. Scores of the quality of nursing care in standard 1 in the experimental group were higher than those of the control group with no significant difference(t=-8.793, p=.000), scores of the quality of nursing care in standard 2 in the experimental group were higher than those of the control group with significant difference(t=-8.793, p=.000) and standard 3 in the experimental group were higher than those of the control group with significant difference(t=-10.550, p=.000). scores of the quality of nursing care in standard 4 in the experimental group were higher than those of the control group with significant difference(t=-8.793, p=.000). scores of the quality of nursing care in standard 4 in the experimental group were higher than those of the control group with no significant difference(t=-1.833, p=.070). 2. Scores of the quality of nursing care in criteria 28 of 33 criteria in the experimental group were higher than those of the control group with significant difference in 12 criteria(p<.05 ). 3. Scores of the quality of nursing care in standard 1 to standard 4(process evaluation); the experimental group were higher than those of the control group with significant difference(t=-10.704, p=.000). scores of the quality of nursing care in standard 5(outcome evaluation); the experimental group were higher than those of the control group. but no significant difference(t=-1.833, p=.070). 4. Scores of the quality of nursing care in experimental group were higher than those of the control group with significant difference(t=-10.794, p=.000). Conclusion : Through this study, I'm sure that using a nursing care standards in musculo-skeletal disorder patients improve quality of nursing care and nursing care standards are effective nursing care.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.10 no.1
• /
• pp.55-69
• /
• 2007

The paper provides the approach to apply formal methods to the development and certification criteria of defense safety/security-critical software. RTCA/DO-178B is recognized as a do facto international standard for airworthiness certification but lack of concrete activities and vagueness of verification/certification criteria have been criticized. In the case of MoD Def Stan 00-55, the guidelines based on formal methods are concrete enough and structured for the defense safety-related software. Also Common Criteria Evaluation Assurance Level includes the strict requirements of formal methods for the certification of high-level security software. By analyzing the problems of DO-178B and comparing it with MoD Def Stan 00-55 and Common Criteria, we identity the important issues In safety and security space. And considering the identified issues, we carry out merging of DO-178B and CC EAL7 on the basis of formal methods. Also the actual case studies for formal methods applications are shown with respect to the verification and reuse of software components.

• Journal of Soil and Groundwater Environment
• /
• v.18 no.2
• /
• pp.19-26
• /
• 2013

This study developed the classification of National Soil Quality Monitoring Network (NSQM) and its site selection criteria to meet the recently established purposes of the NSQM. The NSQM were suggested by this study to classify into the six-purposes site groups from the current classification of land uses. The six purposes site groups were 1) intensive observation sites, 2) contaminant loading sites, 3) human activity sites, 4) background sites, 5) river soil sites, and 6) sites near the groundwater quality monitoring wells. Furthermore, this study developed the site selection criteria of NSQM utilizing the accumulated NSQM data, road traffic data, chemical emission data, census, soil information, and the literature related to soil quality variation due to contaminant loads. For selecting suitable sites for NSQM, this study used road traffic, chemical emission, the distance from the contaminant sources, and population information as specific criteria. The suggested site classification and criteria were appled for the current 100 NSQM sites for evaluation. Forty sites were met to the criteria suggested by this study, but sixty sites were not met to the criteria. However, some of the sixty sites also included the obscure sites that their addresses were not apparent to find them.