• Land and Housing Review
• /
• v.10 no.3
• /
• pp.77-87
• /
• 2019

In Korea, the modular construction method was applied to the construction of facilities such as military barracks and school dormitories, beginning with the pilot project of Seoul New Elementary School in 2003. In 2017, public modular houses were supplied to Busan(Yongho-dong) and Seoul(Gayang-dong), and modular housing is expected to continue to be supplied in the future. However, there is no clear construction standard for the modular housing construction yet, and there are few cases where the infill modular system is applied. Therefore, this study established the work breakdown structure and proposed a standard process focusing on the infill modular system applied to the construction of Dujeong-dong modular house in Cheonan. Level 1 of the work breakdown structure by construction stage of Infill modular was defined as modular manufacturing, assembly, and finishing process. Level 2 was defined as preparation, modular production, modular infill, modular fixing, floor plastering, building finishing, and other site finishing. Level 3 is defined as 57 detailed unit work of infill modular construction. The standard process of infill modular is proposed for the assembly stage that is commonly applicable to infill modular housing construction. The results of this study can be used for the process plan, transportation plan, lifting plan of modular housing construction.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2012.11a
• /
• pp.245-246
• /
• 2012

Lately the Infill Modular Construction System which meets the domestic standards about the structure and fireproof performance and which is applied to the remodeling techniques is being emphasized. In order to introduce the Infill Modular Construction System to domestic market successfully, the development of insufficient element technologies and systematic analysis of process should be preceded. This research aims to establish of Standard Construction Process, as advanced research for the settlement of the Infill Modular Construction System. As advanced research for the activation of the Infill Modular Construction System, this research aims to develop Infill Unit Module's mobile device. This is expected to improve work efficiency. In addition organizing optimized Standard Construction Process by steady work analysis and improvement is being planned.

• Korean Journal of Computational Design and Engineering
• /
• v.12 no.3
• /
• pp.182-192
• /
• 2007

The reduction of product development time is exposed to the competitive pressure due to shortened product-and production technology lifecycles as well as increasingly dynamic markets. Specially in automobile companies, that is of major importance for designing die because it is a bottleneck process in the development of a new car. To improve this conventional design process, this paper describes how to design it fast and flexibly. This was done by a modular method using standard template and a feature and knowledge based design method along the design process.

• Korean Journal of Construction Engineering and Management
• /
• v.12 no.6
• /
• pp.14-21
• /
• 2011

A unit modular system is a construction method which installs on site by manufacturing 50%~90% of the whole process in the factory. This method can minimize the process in the site and maximize the operation, which will reduce the duration and improve the overall quality. The recent paradigm of construction is to be sustainable building. Modular system can be regarded as a sustainable building construction method because it can reduce the amount of construction waste by recycling partial or whole part of overdue building be torn down. A unit modular system is the answer to cope with the increasing market of small size housings. A unit modular system is the most appropriate option at this point. This research proposes the standard operation and construction process of modular system, which enable to optimal system. A case study of reconstructing small-size housing was introduced to support this proposal. Finished unit modular is the reasonable way. However, 80% of complication rate of the modular is the most rational when a defect occurrence during delivery is considered.

• Journal of Korean Society for Quality Management
• /
• v.46 no.4
• /
• pp.1001-1014
• /
• 2018

Purpose: Autonomous driving cars, which are often represent the new convergence product, have been researched since the early years of 1900 but their safety assurance policies are yet to be implemented for real world practices. The primary purpose of this paper is to propose a modular concept based on which a safety assurance system can be designed and implemented for operating autonomous driving cars. Methods: We combine a set of key attributes of CE mark (European Assurance standard), E-Mark (Automobile safety assurance system), and A-SPICE (Automobile software assurance standard) into a modular approach. Results: Autonomous vehicles are emphasizing software safety, but there is no integrated safety certification standard for products and software. As such, there is complexity in the product and software safety certification process during the development phase. Using the concept of module, we were able to come up with an integrated safety certification system of product and software for practical uses in the future. Conclusion: Through the modular concept, both international and domestic standards policy stakeholders are expected to consider a new structure that can help the autonomous driving industries expedite their commercialization for the technology advanced market in the era of Industry 4.0.

• Journal of the Korean housing association
• /
• v.26 no.6
• /
• pp.103-113
• /
• 2015

Modular construction is a process in which a building is produced off-site in module boxes using standard materials. Since the introduction of prefabrication in building construction, Modular Coordination (MC) has become an essential design tool in building design and construction. However, in Korea, the design standardization has not been adequately applied to modular construction. This study intends to analyze the current status of modular construction in Korea and explore the applicability of MC design in the construction industry. The analysis of the current status of MC design within Korean four major modular construction companies indicates that an incremental dimension is not properly used in horizontal planning modules, which results in a problem of increasing construction cost by high material loss rate. But, in vertical planning modules, a incremental dimension of 100 mm (1 M) is found to be used although the structural system varies among manufacturers, which demonstrates the potential for an open system to be well applied in modular construction, despite different structural systems.

• Korean Journal of Construction Engineering and Management
• /
• v.13 no.5
• /
• pp.103-112
• /
• 2012

Republic of Korea is recently becoming an advanced country with increasing standard of living. This is causing a lack of employment in the construction industry because of high labor costs and it is resulting rapid increase in foreign labors. Modular Method of Construction can be defined as 50%~90% of the entire process is completed in factory, and transferred to construction field to install. The main purpose of this process is to minimize the entire process that possibly can be done at construction field in order to maximize the quality. The current local usage of Modular Method of Construction started at Shin Ki Elementary School during 2003 and it is widely used for military facilities. It should be used more because it has strengths of spending short time period to complete and low production costs. It can make a change if Modular Method of Construction is applied. Toyota is currently producing vehicle with conveyor system and if Modular Method of Construction is applied, then it is possible to reduce the waste of labor, and automatic production time. Expansion of the modular Market can be expected by applying this method because it will improve producing costs, high quality, and enforced process. This research tried to solve the problem of factory's manufacturing production by applying local Modular Method of Construction to provide suggestions and analyze the profitability with applied conveyor system. It is depending on produced model, but this research's model will take 20 months including assessment of payback period.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2005.10a
• /
• pp.444-447
• /
• 2005

Increasing competition is due to internationalization in market. This result requires various products in a rapid development of product. Die design is one of bottleneck areas in product development. It takes 40% of total time for whole car development. Therefore a new method should be developed as a fundament on which the design process of die can be carried out effectively. This can be realized by using modular design based on standard template. In this paper a modular design concept will be discussed.

• Journal of the Korean Institute of Intelligent Systems
• /
• v.11 no.5
• /
• pp.395-399
• /
• 2001

This paper describes modular fuzzy inference systems(MFIS) with adaptive capability to extract fuzzy inference modules from observation data through the learning process. The proposed MFIS is based on the structural similarity to Tagaki-Sugeno fuzzy models and a modular neural architecture. The learning of MFIS is done by assigning new fuzzy inference modules and by updating the parameters of existing modules. The fuzzy inference modules consist of local model network and fuzzy gating network. The parameters of the MFIS are updated by the standard LMS algorithm. The performance of the MFIS is illustrated with adaptive control of a nonlinear dynamic system.

• Proceeding of Spring/Autumn Annual Conference of KHA
• /
• 2009.04a
• /
• pp.236-239
• /
• 2009

Since 1990s, we have achieved a certain level of success in standardization of design, construction, and material on housing and public buildings with the national-level promotion. A practical connecting device that can synthesize all the serial processes is required to maximize the effect of construction material standardization. However, desired outcome of the standardization is not achieved yet because these serial standards and notification practices are decided by each part of the process and some are congested. In this study, we aim to improve a general organizational system of Korean Industrial Standard (KS) which is the most fundamental tool for the standardization of construction materials moving from a conventional idea that the standard is only for the material and components producers to a concept that can also be shared by the designers and construction workers. To achieve this, we propose an improvement plan for the Korean Industrial Standard in the perspective of three-tier classification system.