• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2009.10a
• /
• pp.130-136
• /
• 2009

The goal of this paper is to develop a standard side mirror geometry that will perform well across multiple vehicles. One of the important performance attributes of a side mirror is the amount of wind noise generated under the flow conditions on a car. PowerFLOW can be used for Computer Aided Testing of the aeroacoustics performance of a design in addition to directing design modifications based on a detailed analysis of the flow structures responsible for the noise generation. Alternatively, a Design of Experiment (DOE) approach is useful to explore the design space without any a-priori assumptions of the effects of design parameter changes. Some general design guidelines regarding the significant mirror geometry factors will be determined which may help to reduce vehicle development time and cost in the future. The results of this research will also allow us to estimate the trade-off between cost saving and performance optimum related to using a standard mirror shape for different vehicles.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.7 no.6
• /
• pp.198-206
• /
• 1999

An automobile outside rear view mirror system has been analyzed and designed to reduce vibration with a finite element model. model analysis is conducted for the calculation of natural frequencies. harmonic analysis is utilized to estimate the displacements of the glass surface under dynamic loads. The model is verified with the vibration experiment of the parts and the assembled body. The structure of the mirror system is optimized for the robustness defined by the Taguchi concept. At first, many potential design variables are defined. Final design variables are selected based on the amount of contribution on the objective function. That is, sensitive variables are chose. The SN ratio in the Taguchi method is replaced by an objective function with the mean and the standard deviation of the quality characteristic. The defined objective function is appropriate in the structural design in that the vibration displacements are minimized while the robustness is improved.

• Journal of the Korean Society for Precision Engineering
• /
• v.16 no.10
• /
• pp.203-208
• /
• 1999

By tilting the reference mirror of Twynman-Green interferometer having a reference mirror and a moving mirror, firinge pattern composed of bright and dark parallel lines can be obtained and the fringe pattern is shifted according to the displacement of the mowing mirror. Several studies are executed for displacement measurement by detecting the intensity of the fringe with photo-diodes having small detecting area. In this study, to improve the sensitivity and robustness, the intensity of fringe is detected by using a large-area quadratic photo-diode masked with a grating panel having four kinds of binary grating having phase-difference of 0, {\pi}$/4, {\pi}$/2, 3 {\pi}$/4. The phase of the fringe is calculated with a simple 4-buckets algorithm. A experimental result shows that standard deviation of 5.653 nm is obtained comparing with a capacitive type gap sensor having nearly 1 nm accuracy.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.41 no.5
• /
• pp.435-442
• /
• 2017

A catadioptric optical system produces images by refraction and reflection. To improve the image quality, the shape of the secondary mirror supporters should be determined to ensure that the centering error and tilt of secondary mirror are very small, and the main mirror receives the maximum amount of light. Furthermore, random acceleration vibration has a severe effect on the optical system for observation reconnaissance. In order to obtain the best design under these circumstances, the volume of the secondary mirror supporter must be minimized while satisfying the constraints expressed in standard deviations of the centering error and tilt. It is difficult to analytically calculate the design sensitivities of the standard deviations, because they are statistically defined. Hence, after their second-order regression equations were determined using a response surface methodology, an optimal geometric design was obtained. As a result, it was found that the method proposed in this paper, which included a random vibration analysis, was effective in obtaining the optimal design for a secondary mirror supporter with robustness.

• Proceedings of the ESK Conference
• /
• 1997.10a
• /
• pp.114-119
• /
• 1997

자동차 내장 설계의 주요 검토 사항으로 거주성, 조작성, 시인/시계성, 승강성, 적재성, 안전성 등 을 들 수 있다. 특히, 승용차의 주행 시 운전자는 주위 환경에서 일어나는 상황의 대부분을 눈을 통해 인식하게 되므로, 주행 중 운전자에게 충분한 시계를 확보해 주는 것이 자동차의 설계에서 중요한 요인 이 된다. 본 연구에서는 시계성을 중심으로 미국의 FMVSS(Federal Motor Vehicle Sfety Standard), 유럽의 EEC(European Economy Community), 한국공업규격 등에서 규정하고있는 시계 요소들을 조사 비교하고, 시계 성 평가의 기준으로 활용한다. 시계성을 평가하기 위해 전방가시거리, 전방수평시계, Inside Rear View Mirror와 Outside Rear View Mirror를 통해 볼 수 있는 Viewing angle, Inside Rear View Mirror와 95%ile Eyellipse와 높이 등의 요소를 측정하였다. 측정 결과는 승용차의 운전 공간 내의 0ptimal Eye Point를 결 정하는 데 이용되며, 시인/시계성을 개선하는 Seating Packaging Procedure 개발의 기초 자료로 활용될 수 있을 것이다.

• Journal of the Korean Society of Costume
• /
• v.56 no.8 s.108
• /
• pp.83-94
• /
• 2006

In this era of ubiquitous service, a computing device has functions similar with human beings. It influences all major fields of human life, such as clothing, dieting and housing. In order to use the coordination functions of the magic mirror, which might be a basic part of clothing in the era of ubiquitous service, this study concentrates on product information that should be inputted in RFID chip in detail in order to exercise virtual fashion coordination. Information should be inputted in RFID chip to use magic mirror for fashion coordination, a direction for doing this was also suggested. After coding the suggested clothing items, virtual fashion coordination was implemented as a fashion illustration. This study is as following, First, sorts standard code for suitable coordination in 4 images and presented to a proof. Code denoted by 10 characters. Each code literal special quality marks by two characters and divided by season, image, fabric, item, rotor, five items. Item middle of characters of 10 code, when agree on article more than 8, coordination is enabled. Secondely, It is presented by coordination to dressing action picture by suitable coordination classified apart in whole occasions, and coordination method by wearer inclination is remembered wearer's dressing action picture to Magic mirror including layered look. Thirdly, wardrobe of Magic mirror clothes that always buy newly in magic mirror, is washing and clothes that do not take to wardrobe did to be controlled. Fourth, Wealth and schedule is suggested firster than wearer's dressing action.

• Journal of Sensor Science and Technology
• /
• v.26 no.1
• /
• pp.50-55
• /
• 2017

The measurement of absolute humidity of gases is essential in many industries. The effect of temperature on aluminum oxide and chilled mirror dew-point hygrometers is investigated. The temperature of laboratory, pipe line, and sensor is varied and the dew point is measured by two different aluminum oxide hygrometers. In all cases, the dew point of hygrometers is increased as the temperature is elevated. The reason behind this observation is due to desorption of water from the inside of pipe line and/or sensor surroundings at elevated temperature that result in the increase of the absolute humidity. Moreover, the sensor itself shows a certain degree of temperature dependency in sensing the humidity especially at low temperature. It is also studied that chilled mirror dew-point hygrometer may indicate a higher dew point than the reference at high temperature because the cooling capability of mirror is decreased at high temperature. Our study will provide evidences in the incorporation of the temperature effect as uncertainty factors in the standard calibration procedure for dew point hygrometers.

• Korean Journal of Heritage: History & Science
• /
• v.52 no.4
• /
• pp.206-225
• /
• 2019

This paper examines the trade and development aspects of glass mirrors through the literature records of the Joseon Dynasty, and studies the characteristics of existing glass mirror crafts by referring to the terms and types shown in the literature. The glass mirror in the records had called western mirrors(西洋鏡, 洋鏡), glass mirrors(玻璃鏡, 玻瓈鏡), stone mirrors(石鏡), etc. Glass mirrors were imported mainly through trade with Russia and the Qing Dynasty since the 17th century and were banned from importation in the late Joseon Dynasty. These mirrors were something new that caused a great stirring in Joseon society in the 18th century, and in the 19th century, it grew larger as a commodity needed for everyday life, especially with trade with Japan. At that time, glass mirrors were used for various purposes, such as installing large glass at a store, which were not the standard mirror usage of confirming one's appearance. These mirrors surprised Koreans in Joseon who experienced them at Yanjing Liulichang(燕京 琉璃廠) in the 18th and 19th centuries. As a result, the demand for glass mirrors rapidly increased and quickly surpassed that of bronze mirrors. Consequentially, new crafts using glass mirrors instead of bronze mirrors in Joseon began to be produced and used after the 18th century. In particular, integrated flat boards of glass mirrors were developed as crafts used indoors. It was convenient to use the hair comb box, a long-time presence in Joseon society, with the bronze mirror. This kind of mirror remained apparent in various genre paintings, including the Taepyeong Seongsido(太平城市圖, 'A Thriving City in a Peaceful Era') collected the National Museum of Korea which reflect its populism of the times. Also, the Mirror Stand(鏡臺) used in the Qing Period was produced in Joseon, but there was a difference in the way of making the drawers and box shapes between two nations. On the other hand, the Face Mirror(面鏡) was made to look at the face. Various crafts made with the aesthetic sense of Joseon, such as the ox horn inlaying craft technique, were produced with auspicious designs. In the 19th century, glass mirrors were imported from European countries, such as France, Denmark, the Netherlands, and the United Kingdom, however after the end of the 19th century Japanese crafts were popular. Glass mirrors, which were popular in the Meiji and Taisho eras of Japan, were imported and also the Mirror Screen(鏡屛) using large glass mirrors were used. In particular, the mirror screen had developed wood furniture since the previous time, which were used for banquets and large spaces, such as the drawing room, and were imported from China and Japan. In addition, the western architectural effect of attaching a mirror to the wall was also attempted to adjust the brightness of the space and introduce another image and scenery in the mirror. This was done at Deoksugung Palace's Seokjojeon.

• Journal of Information Display
• /
• v.3 no.3
• /
• pp.35-43
• /
• 2002

Silicon-based 0.69-inch AMOEL microdisplay with integrated driver and timing controller circuits for microdisplay applications has been developed using 0.35 ${\mu}m$ l-poly 4-metal standard CMOS process with 5 V CMOS devices and CMP (Chemical Mechanical Polishing) technology. To reduce the large data programming time consumed in a conventional current programming pixel circuit technique and to achieve uniform display, de-amplifying current mirror pixel circuit and the current-mode data driver circuit with threshold roltage compensation are proposed. The proposed current-mode data driver circuit is inherently immune to the ground-bouncing effect. The Monte-Carlo simulation results show that the proposed current-mode data driver circuit has channel-to-channel non-uniformity of less than ${\pm}$0.6 LSB under ${\pm}$70 mV threshold voltage variaions for both NMOS and PMOS transistors, which gives very good display uniformity.

• Proceedings of the Korean Institute of Intelligent Systems Conference
• /
• 1993.06a
• /
• pp.785-788
• /
• 1993

This paper presents the prototype framework for automated integration of CMOS current-mode fuzzy logic circuits using an intelligent module approach. The library of modules representing the standard fuzzy logic operators was built. These modules were finally used to synthesized sophisticated fuzzy logic units. Fuzzy unit designs were made based upon the results of a newel methodology of the current mirror-based fuzzy logic function synthesis. This methodology is actually incorporated into the presented framework. As an example, the membership function unit was synthesized, simulated, and the final layout was generated using the presented framework. Finally, the fuzzy logic controller unit (FLC) was generated using the proposed framework. Simulation as well as measurement results show unquestionable advantages of the proposed fuzzy logic function integration system over the classical design methodology with respect to the area, relative error and performance.