• Journal of radiological science and technology
• /
• v.41 no.2
• /
• pp.115-122
• /
• 2018

We aims to perform comparative analysis on the dose area and image qualities varying on the slice thickness when using Automatic Exposure Controller (AEC) and manual exposure; thus, it wants to suggest a measure to reduce exposure dose by setting the optimal examination condition for each slice thickness. The method was to set the thickness as Thin, Normal, and Heavy adult and evaluate the dose area, spatial resolution, low contrast resolution, Signal to Noise Ratio (SNR) and Contrast to Noise Ratio (CNR) according to each slice thickness by using the AEC and the manual exposure controller. The dose area according to each slice thickness all increased both when using the AEC and the manual exposure. However, the manual exposure showed lower dose area product than the AEC. Spatial resolutions and low contrast resolutions were all observed to be higher than the evaluation standard. Also, the SNR and CNR of each thickness all increased when using the AEC. When using the manual exposure, SNR and CNR increased in all cases other than the Heavy Adult. Consequently, the Thin and Normal Adult showed dose reduction about 2 times when using the manual exposure controller, while ensuring the image quality. Heavy adult was able to maintain good image quality by using AEC.

• Korean Journal of Radiology
• /
• v.22 no.2
• /
• pp.168-178
• /
• 2021

Objective: To provide an automatic method for segmentation and diameter measurement of type B aortic dissection (TBAD). Materials and Methods: Aortic computed tomography angiographic images from 139 patients with TBAD were consecutively collected. We implemented a deep learning method based on a three-dimensional (3D) deep convolutional neural (CNN) network, which realizes automatic segmentation and measurement of the entire aorta (EA), true lumen (TL), and false lumen (FL). The accuracy, stability, and measurement time were compared between deep learning and manual methods. The intra- and inter-observer reproducibility of the manual method was also evaluated. Results: The mean dice coefficient scores were 0.958, 0.961, and 0.932 for EA, TL, and FL, respectively. There was a linear relationship between the reference standard and measurement by the manual and deep learning method (r = 0.964 and 0.991, respectively). The average measurement error of the deep learning method was less than that of the manual method (EA, 1.64% vs. 4.13%; TL, 2.46% vs. 11.67%; FL, 2.50% vs. 8.02%). Bland-Altman plots revealed that the deviations of the diameters between the deep learning method and the reference standard were -0.042 mm (-3.412 to 3.330 mm), -0.376 mm (-3.328 to 2.577 mm), and 0.026 mm (-3.040 to 3.092 mm) for EA, TL, and FL, respectively. For the manual method, the corresponding deviations were -0.166 mm (-1.419 to 1.086 mm), -0.050 mm (-0.970 to 1.070 mm), and -0.085 mm (-1.010 to 0.084 mm). Intra- and inter-observer differences were found in measurements with the manual method, but not with the deep learning method. The measurement time with the deep learning method was markedly shorter than with the manual method (21.7 ± 1.1 vs. 82.5 ± 16.1 minutes, p < 0.001). Conclusion: The performance of efficient segmentation and diameter measurement of TBADs based on the 3D deep CNN was both accurate and stable. This method is promising for evaluating aortic morphology automatically and alleviating the workload of radiologists in the near future.

• Journal of Korean Society of Steel Construction
• /
• v.23 no.5
• /
• pp.637-646
• /
• 2011

This study is related to the development of a design automation system for the construction design phase of steel structures. The system intended for beam splice friction connections using high-strength bolts. The standard design method and standardization principles that are suggested in the design manual for standard connections using high-strength bolts published by the Korean Society of Steel Construction(KSSC) were reviewed. A structural analysis algorithm was formulated from the review. A design automation system that can automatically calculate the structural design of connections and automatically generate the connection model without separate inputs was developed. To verify the validity of the developed system, its results were compared with the date in the table for the connection design in the Design Manual. The development system was also applied to the sample model. Then the structural design results were compared with the properties of the connection models and drawings created from the results.

• Journal of the Korea Institute of Building Construction
• /
• v.2 no.3
• /
• pp.147-154
• /
• 2002

The Korean government makes an effort to raise the competitive power of nation through CM activation in the construction industry. Since the first CM service was applied to the atomic power plant project in 1986, the number of CM contracts are continuously being increased and will be up to 20% by 2002 in public sector. However, the public projects had been executed without any procedure manual or standard guideline of CM services. Meanwhile the Ministry of Construction and Transportation issued $\ulcorner$CM Service Guide$\lrcorner$, but the guide shows an indefinite description in the responsibility, authority and scope of activity for the project participants. Therefore, it is required the procedures be improved and scope of activities be established for the project participants. This study was generated from the comparative analysis of $\ulcorner$Standard CM Services and Practice$\lrcorner$ Published by CMAA and domestic $\ulcorner$CM Service Guide$\lrcorner$ and the case of Incheon International Airport construction. The purpose of this study is to provide the fundamental data for an improvement in the procedures of project execution and the construction manager's activities/rolls shown on $\ulcorner$CM Service Guide$\lrcorner$

• The Journal of Churna Manual Medicine for Spine and Nerves
• /
• v.16 no.1
• /
• pp.53-66
• /
• 2021

Objectives The purpose of this scoping review is to investigate the trends and gaps in existing research on neural mobilization in Korea and to suggest further directions for study. Methods A scoping review was sequentially conducted according to the five steps outlined by Arksey and O'Malley, and the PRISMA-ScR checklist. We searched five domestic databases (RISS, DBpia, KISS, ScienceON, and KMBASE) and identified relevant literature reported until April 15, 2021. The key search terms used were "Neural mobilization" and "Neurodynamic". Results Of the 1383 studies identified in the search, 50 were finally selected. Of these, 45 studies were in the field of medicine and pharmacy and physical therapy as the most common sub-field. Thirty-eight of the 50 studies (76%) were randomized controlled trials. Neural mobilization was most frequently used in the treatment of stroke (n = 13) and of various neuromusculoskeletal diseases such as cervical radiculopathy (n = 8) and low back pain (n = 5). The main targets of neural mobilization were the median nerve (n = 20) and sciatic nerve (n = 14). The most commonly used technique for neural mobilization was that developed by Butler and Jones in 1991 (n = 10). Conclusions This is the first scoping review of neural mobilization in Korea. We believe that further research on neural mobilization with other types of research design is necessary to investigate the utility of neural mobilization and to establish standard protocols. Our findings indicate that neural mobilization can be considered as an intervention for neuromusculoskeletal diseases in Korean medicine.

• Journal of Korean Society for Quality Management
• /
• v.46 no.4
• /
• pp.761-784
• /
• 2018

Purpose: The purpose of this study is to introduce the development trend of international standard in the innovative management system and propose the application method of the standard for SME certification system. Methods: This study is based on literature studies and case studies considering the initial stage of development of standards as well as lack of domestic and international research examples. In the literature review, we focused on the characteristics of the innovation management system standards at the national, regional and global level. We examined case studies of Spain and Portugal as case studies. Besides, the evaluation items and certification status of domestic innovative SMEs certification were also searched to find out how to introduce them in Korea. Results: The results of this study can be summarized in three major points. First, new international standards of innovation management are being developed under the ISO management system standard and are currently in the DIS stage. Second, in the case of Spain adopting the national innovation management system standard, it has been reported that the innovation management system standard has a significant effect on the innovation ability and management performance. Third, it was not easy to establish a standardized innovation process between the innovation based on creativity and the standardized based product. The Oslo manual was not enough to provide enough guidance in this area. Conclusion: Companies that want to strengthen their organizational innovation capabilities from a management system point of view and Policymakers that want to plan the upgrading and integrated certification operating system of the domestic innovation SME certification need to consider the ISO 50500 series as a global level standard other than the Oslo manual.

• Journal of Korean Library and Information Science Society
• /
• v.30 no.3
• /
• pp.233-254
• /
• 1999

The forth edition of the Publication Manual of the American Psychological Association (1994) provides documentation advice for writers in the social sciences. This style of citation briefly identifies the source for readers and enables them to locate the source of information in the alphabetical reference list at the end of an article. Although the APA publication manual gives recommendations for citing some kinds of electronic resources, it acknowledges that at the time of writing this edition, a standard had not yet emerged for referencing on-line information. Because the manual was published before the development of the Internet as we know it, it does not have guidelines for citing www sites, web discussion forum posting, and other Internet resources,. Therefore this study aims to extend the principles and conventions of APA citation style to electronic resources.

• Journal of the Korean Society of Safety
• /
• v.14 no.2
• /
• pp.122-126
• /
• 1999

In this study, using the temperature history analysis, the influences of the conductive values of wooden form, which are specified by Korean Standard for Concrete and ACI Practice Manual for Concrete, on the temperature history were examined. And, the calculated temperature history is compared with the measured temperature history. In the examination for the influences of the conductive values of wooden form, the value recommended by the Korean Standard can more closely predict the themperature history at the points which the variation of the boundary condition should be considered.

• Journal of Korean Institute of Industrial Engineers
• /
• v.4 no.1
• /
• pp.21-27
• /
• 1978

For labor-intensive sewing industry, productivity could be enhanced with the proper utilization of standard time system. This paper develops a standard data for sewing operations through three stages. The first is to identify the manual motions from sewing operations. The second is to simplify the MTM-1 data considering the frequency and the nature of basic motions occuring in the operations. Finally we synthesize the standard data using the simplified MTM-1 by the film analysis of the actual operations pictured in the field. The standard data developed is shown to be easier and faster with reasonable accuracy in determining the standard time compared to the MTM-1.

• Journal of Korean Medicine Rehabilitation
• /
• v.32 no.3
• /
• pp.13-27
• /
• 2022

Objectives This study investigated the trends in domestic and international clinical research in craniosacral therapy, classified as a type of Chuna manual therapy, and suggested further directions in Korean medicine. Methods This scoping review was performed using the Arksey and O'Malley methodological framework and preferred reporting items as per the preferred reporting items for systematic reviews and meta-analyses extension for scoping reviews checklist. Eight electronic databases (PubMed, EMBASE, Cochrane Library, Koreanstudies Information Service System [KISS], KMBASE, Oriental Medicine Advanced Searching Integrated System [OASIS], Research Information Sharing Service [RISS], ScienceON) were searched to identify articles with the search terms "craniosacral therapy" and "cranial osteopathy" until December 2021. Results Forty-five studies were eligible as per our inclusion criteria. Most research studies (n=44) were conducted in the field of medicine and pharmacy, especially in rehabilitation medicine (n=16). As a result of the study design, randomized controlled trials (n=20) were the most common, and chronic pain (n=9) was the most frequently targeted disease, followed by headache (n=7). Thirty-two studies suggested interventions and 20 studies used Upledger's 10-step protocol. The average duration of craniosacral therapy was 41 min per session, administered 1.4 times per week. Outcome measurements were analyzed and categorized with the examination procedure for the patient. Conclusions This is the first scoping review of craniosacral therapy in Korea, and we believe that our findings could support its utility as Chuna. In the future, more studies should be conducted to establish the evidence of clinical efficacy of craniosacral therapy and develop standard techniques in Korean medicine.