• 한국임상수의학회지
• /
• 제19권4호
• /
• pp.405-410
• /
• 2002

The purpose of this investigation was to examine the effects of osteocalcin (serum bone GLA-protein, BGP) and procollagen carboxy-terminal propeptide (PICP) on new bone formation of canine fracture models. Serum osteocalcin and PICP were measured by standard RIA. The values of osteocalcin and PICP in the non-union and delayed-union fracture models were measured biweekly for 20 weeks in 14 dogs. The unions were radiographed for fracture healing. In non-union fracture group, the activity of BGP was markedly increased at four to eight weeks and decreased at twelve to twenty weeks and the activity of PICP was markedly increased at two to six weeks and slightly decreased at sixteen to twenty weeks. In delayed-union fracture group, the activity of BGP was markedly increased at two to eight weeks after treatment and maintained for the level until twenty weeks and the activity of PICP was markedly increased at two to six weeks after treatment and maintained for the level until twenty weeks. Radiologically, non-union group was not achieved until twenty weeks after fracture, delayed-union group was successfully achieved in eighteen weeks after fracture. These results suggested that the. activities of osteocalcin and PICP are useful parameters for biochemical markers of bone formation in dogs.

• 천문학회보
• /
• 제41권1호
• /
• pp.39.3-39.3
• /
• 2016

About one tenth of dwarf elliptical galaxies found in the Virgo cluster have a disk component, and some of them even possess substructures such as bars, lens, and spiral arms. We use N-body simulations to study the formation of these non-axisymmetric features in disky dwarf elliptical galaxies. By mimicking VCC 856, a bulgeless dwarf galaxy with embedded faint spiral arms, we construct 11 sets of initial conditions with slight dynamical variations based on observational data. Our standard model starts slowly to form a bar at ~3 Gyr and then undergoes buckling instability that temporarily weakens the bar although the bar strength continues to grow afterward. We find 9 of our models are unstable to bar formation and undergo buckling instability. This suggests that disky dwarf elliptical galaxies are intrinsically unstable to form bars, accounting for a population of barred dwarf galaxies in the outskirts of the Virgo cluster. To understand the origin of the faint grand-design spiral arms, we additionally construct 6 sets of models that undergo tidal interactions with their neighbors. We find that faint spiral arms consistent with observations develop when tidal forcing is relatively weak although strong encounter still results in bar formation. We discuss our results in light of the dynamical evolution of dwarf elliptical galaxies including mergers.

• 전자공학회논문지A
• /
• 제30A권6호
• /
• pp.38-48
• /
• 1993

A recessed n-p Juction diode with the self-aligned sturcture is proposed and fabricated by using the polysilicon as an n$^{+}$ diffusion source. The diode structure can be applicable to the emitter-base formation of high performance bipolar divice and the n$^{+}$ polysilicone mitter has an important effect on the device characteristics. The considered parameters for the polysilicon formation are the deposition condition. As$^{+}$ dose for the doping of the polysilicon and the annealing condition using RTP system. The vertical depth profiles of the fabricated diode are obtained by SIMS and the electrical characteristics are analyzed in terms of the ideality factor of diode (n), contact resistance and reverse leakage current. In addition, n$^{+}$-p junction diodes are formed by using the amorphous silicon (of combination of amorphous and polysiliocn) instead of polysilicon and their characteristics are compared with those of the standard sample. The As$^{+}$ dose for the formation of good junction is about 1~2${\times}10^{16}cm^{2}$ at given RTA conditions (1100.deg. C, 10sec).

• 상하수도학회지
• /
• 제11권4호
• /
• pp.126-132
• /
• 1997

Trihalomethanes (THMs) are formed during the chlorination of waters containing precusors compounds, most commonly humic substances, changes in pH, TOC, temperature, precusor source and concentration chlorine dosage, bromide level and reaction time directly influence trihalomethane formation potential (THMFP) and kinetics. A standard THMFP experiment was conducted for each water under the following conditions ; $20^{\circ}C$, pH 7.4, reaction time of 48hr, TOC 5.7mgC/L. A series of kinetic experiments was conducted for each water to provide THM formation under varying conditions of reaction time, pH, temperature and TOC, chlorine dosage. The resultant mutiple parameter powre function predicts a THM which allows direct calculation of THM, is $[THM]=0.00039(pH-2.81)[TOC][Cl_2]^{0.321}\;t^{0.266}\;T^{0.286}$ Characteristics of raw water in advanced drinking water treatment pilot plant were, TOC levels ran from 4.42~6.84mgC/L, pH 7.2~7.8, temperature $7.0{\sim}18.4^{\circ}C$, UV-254 absorbance $0.057{\sim}0.85cm^{-1}$, THM levels ranged from 0.031~0.049mgC/L.

• Journal of Welding and Joining
• /
• 제29권6호
• /
• pp.77-81
• /
• 2011

In most industry, manual GTAW welding is preferred for formation of stable back bead in root weld of butt joint. However, manual GTAW welding has low productivity as compared with GMAW, also it has unstable bead quality which depend on skilled workers. So it is necessary to develop process of root pass welding by using automation GMAW that have stable back bead formation and high productivity. In this paper, the design of U-groove with 3mm root face was applied to extend the tolerance of misalignment in condition of standard root gap 1.5mm. Consequently, for the formation of stable back bead in root pass of butt welding, in case of the narrow root gap(0.5mm) the large arc force was applied by increasing the current and voltage. In case of the large root gap(2.5mm), the small arc force was applied by decreasing the current and voltage. Considering the various root gap, the required deposited metal was controlled by welding speed only.

• Journal of the Korean Association of Oral and Maxillofacial Surgeons
• /
• 제28권3호
• /
• pp.188-195
• /
• 2002

The purpose of this investigation was to evaluate the relationship between the hydration time of demineralized freeze-dried bone (DFDB) and early new bone formation in rat calvarial defects filled with DFDB. Rats (n = 43) were divided into 4 experimental groups. Standard, transosseous circular defects of the calvaria were made midparietally. In experimental group 1, the defect was grafted immediately after soaking the DFDB. In experimental group 2, the defects were grafted with DFDB after soaking the DFDB for 10 minutes. In experimental groups 3 and 4, the defects were filled after soaking the DFDB for 30 and 60 minutes, respectively. Graft sites were analyzed histologically after healing periods of 1, 2, or 4 weeks. Each group showed similar bone regeneration at each time point by histological analysis. The results of this study were as follows: 1. After 1 week, a significant amount of inflammation, granulation tissue, and edema were found. A small amount of bone was seen, but the amount of bone did not differ between groups. 2. After 2 weeks, a small amount of new bone formation and DFDB resorption were observed. 3. After 4 weeks, a greater amount of new bone formation was observed. The greatest amount of bone formation occurred in experimental group 4 after 4 weeks. We conclude that the hydration time of DFDB does not affect new bone formation and that it is very important to control inflammation in bone grafting.

• 한국식품과학회지
• /
• 제29권4호
• /
• pp.700-704
• /
• 1997

Gluten 대체 재료로써 gum질과 지방질 및 활성 gluten을 첨가하여 쌀빵의 특성을 비교 검토 하였다. 실험에 사용한 모든 종류의 gum질 첨가에 의해서 쌀빵의 제조는 가능하였으며, 특히 3% hydroxypropyl-methyl-cellulose를 첨가하여 제조하는 경우 제빵의 성형성이 좋았다. 쌀빵 제조시 첨가하는 지방질로는 상온에서 액체상인 식용유를 사용하는 편이 고체상의 지방인 마아가린이나 라아드 보다 쌀빵의 비용적을 증가시키며, 부드러운 조직감을 부여하고 있었다. 쌀빵 제조시의 가열방법은 습식가열보다는 건식가열이 바람직한 결과를 얻었다. 3% hydroxypropyl-methyl-cellulose를 첨가하여 품종별 쌀로서 빵을 제조한 경우, 한강찰벼를 제외한 모든 품종에서 쌀빵 제조가 가능하였으며, 특히 수원조, AC 27, IR 44 등의 쌀로서 제조한 쌀빵의 성형성은 아주 좋았다. Gluten과 강력분을 첨가하여 제조하는 경우에도 한강찰벼를 제외한 모든 품종에서 쌀빵 제조가 가능하였으며, 수원 230이나 Pusa-33-30 등의 쌀로서 제조한 것이 다른 품종의 쌀보다 제빵성이 좋았다.

• 자원환경지질
• /
• 제11권1호
• /
• pp.21-37
• /
• 1978

The depositional environment of the Manhang and the Geumcheon Formation of the Pennsylvanian Gomog Croup is revealed to the shallow neritic marine milieu in this paper also as the results of Park (1963), Cheong(1975) and Kim (1976), through the analyses of stratigraphy, paleocurrent, properties of cross-beddings and sedimentational features. The formations contains some possible terrestrial sediments suggesting the paralic environment, which are however not recognized definitely within them. The paleocurrent analysis is made to the Manhang Formation only. The paleocurrent of the formation is known to belong to the shallow neritic longshore current. The paleocurrent analysis is based chiefly on the cross-bedding analysis, and subordinately on the texture of elastic coarse sediments. The paleocurrent mean is determined to $269^{\circ}$, that is, from east to west, of which direction is interpreted to the right angle to the slope of the basinal depository plane and also the parallel with die depositional strike, according to Klein (1960) and Selley's (1968) criteria. The variance value of paleocurrent directions of the Manhang Formation in the whole area studied is 6,374, and the values range from 3,394 to 6,957 according to the dirstricts. The paleocurreut pattern of the whole area shows polymodel, and the patterns in each district range from trimodel to quadrimodel. Those models approach to the shallow marine or paralic model of Tohill and Picard (1966), Picard and High (1968 a), Pisnak (1957) and Pettijohn (1962). The mean value of maximum inclinations of cross-beddings of the whole area is $19.9^{\circ}$ with the standard deviation of 8.4, and ranges from $15.6^{\circ}$ to $21.7^{\circ}$ in the districts. Comparing the histogram showing the frequency distribution of the maximum inclinations of cross-beddings of the Manhang Formation with the Pettijohn's (1962) histogram, it is found that the model approaches to his marine model. The Pennsylvanian Gomog Group of the coalfield is considered to have had been deposited in the pseudogeosynclinal zone on the plateau by the transgression of the Tethyan sea caused by the epirogenic movements during the Pennsylvanian Period.

• 천문학회보
• /
• 제45권1호
• /
• pp.38.2-38.2
• /
• 2020

Horizon Run 5 (HR5) is a cosmological hydrodynamical simulation which captures the properties of the Universe on a Gpc scale while achieving a resolution of 1 kpc. This enormous dynamic range allows us to simultaneously capture the physics of the cosmic web on very large scales and account for the formation and evolution of dwarf galaxies on much smaller scales. Inside the simulation box. we zoom-in on a high-resolution cuboid region with a volume of 1049 × 114 × 114 Mpc3. The subgrid physics chosen to model galaxy formation includes radiative heating/cooling, reionization, star formation, supernova feedback, chemical evolution tracking the enrichment of oxygen and iron, the growth of supermassive black holes and feedback from active galactic nuclei (AGN) in the form of a dual jet-heating mode. For this simulation we implemented a hybrid MPI-OpenMP version of the RAMSES code, specifically targeted for modern many-core many thread parallel architectures. For the post-processing, we extended the Friends-of-Friend (FoF) algorithm and developed a new galaxy finder to analyse the large outputs of HR5. The simulation successfully reproduces many observations, such as the cosmic star formation history, connectivity of galaxy distribution and stellar mass functions. The simulation also indicates that hydrodynamical effects on small scales impact galaxy clustering up to very large scales near and beyond the baryonic acoustic oscillation (BAO) scale. Hence, caution should be taken when using that scale as a cosmic standard ruler: one needs to carefully understand the corresponding biases. The simulation is expected to be an invaluable asset for the interpretation of upcoming deep surveys of the Universe.

• 한국결정성장학회지
• /
• 제31권1호
• /
• pp.55-62
• /
• 2021

CO2 가스 발생 감소와 연비향상을 위해서 HEV 차량은 ISG 시스템을 채용하고 있다. 이 ISG 시스템은 배터리가 감당해야 하는 전기 부하를 증대시켰고, 시동 횟수도 급격히 늘어나게 하였다. 이를 위해 AGM 연축전지가 개발되어 사용되고 있으나, 종래의 연축전지에 비해서 formation 중 전해액량 조절이 더 높은 수준으로 유지해야 됨에 따라 충전시간이 약 3배 가량 길어지게 되었다. 본 연구에서는 formation pattern의 최적화를 통해서 충전효율을 증대시켜 충전시간을 단축하고자 하였다. formation pattern의 최적화를 위해서, 16개 multi step에 10개 충전 step과 6개의 방전 step을 적용하고, step별 충전 전류를 조절한 4가지 조건(21 hr, 24hr, 27 hr, 30 hr)으로 시험을 진행하였다. 그 결과 24 hr 시험 조건이 PbO2 변환율이 가장 높게 분석되었고, 용량 103.3 %, 저온시동성능 38 sec, 충전수입성 37.36 A로 나타났다. Multi-step과 방전 step을 적용한 충전 프로그램의 결과, 충전 중에 국부적으로 급격히 발생된 분극화를 제거하고 전류의 손실을 최소함으로써 충전효율을 증가시킬 수 있음을 검증하였다. 이렇게 충전효율을 증가시킴으로써 본 연구에서는 충전시간을 기존에 비해서 약 30 % 감소시키는 탁월한 결과를 얻을 수 있었다.