• Journal of the Semiconductor & Display Technology
• /
• v.14 no.2
• /
• pp.67-72
• /
• 2015

For the development of UFS device test system, M-PHY specifications should be matched with MIPI-standard which is analog signal protocol. In this paper, the implementation methodology and hardware structure for the M-PHY AFE (Analog Front End) Block was suggested that it can be implemented using universal components without ASIC process. The testing procedure has a jitter problem so to solve the problems we using ASIC process, normally but the ASIC process needs a lot of developing cost making the UFS device test system. In is paper, the suggestion was verified by the output signal which was compared to the MIPI-standard on the Prototype-board using universal components. The board was reduced the jitter on the condition of HS-TX and 5.824 Gbps Mode in SerDes (Serialize-deserializer). Finally, the suggestion and developed AFE block have a useful better than ASIC process on developing costs of the industrial UFS device test system.

• Journal of the Korean Ceramic Society
• /
• v.45 no.7
• /
• pp.375-379
• /
• 2008

Redox behavior was observed in alkali alkaline earth silicate PDP (Plasma Display Panel) glass melts doped with sulfate and sulfide by square wave voltammetry (SWV). According to voltammograms produced at a temperature range of 1100 to $1400^{\circ}C$ and frequency range of 5 to 1000 Hz, both melts showed the same behavior in which there is one reduction peak at low frequency but another peak at an increase of frequency. Based on the frequency dependence of the peak current, self diffusivity of $S^{4+}$ was determined. Based on the temperature dependence of the peak potential, standard enthalpy (${\Delta}H^0$) and standard entropy (${\Delta}S^0$) for the reduction of $S^{4+}$ to $S^0$ were calculated.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2002.08a
• /
• pp.567-570
• /
• 2002

The LVDS (Low Voltage Differential Signaling) I/O cells, fully compatible with ANSI TIA/ EIA-644 LVDS standard, are designed using a 0.35${\mu}m$ standard CMOS technology. With a single 3V supply, the core cells operate at 1.34Gbps and power consumption of the output driver and the input receiver is 10. 5mW and 4.2mW, respectively. In the output driver, we employ the DCMFB (Dynamic Common-Mode FeedBack) circuit which can control the DC offset voltage of differential output signals. The SPICE simulation result of the proposed output driver shows that the variation of the DC offset voltage is 15.6% within a permissible range. In the input receiver, the proposed dual input stage with a positive feedback latch covers rail-to-rail input common-mode range and enables a high-speed, low-power operation. 5-channels of the proposed LVDS I/O pair can handle display data up to 8-bit gray scale and UXGA resolution.

• Journal of the Semiconductor & Display Technology
• /
• v.13 no.1
• /
• pp.57-62
• /
• 2014

This paper proposes a new optical recognition method of credit card numbers. Firstly, the proposed method segments numbers from the input image of a credit card. It uses the significant differences of standard deviations between the foreground numbers and the background. Secondly, the method extracts gradient features from the segmented numbers. The gradient features are defined as four directions of grayscale pixels for 16 regions of an input number. Finally, it utilizes an artificial neural network classifier that uses an error back-propagation algorithm. The proposed method is implemented using C language in an embedded Linux system for a high-speed real-time image processing. Experiments were conducted by using real credit card images. The results show that the proposed algorithm is quite successful for most credit cards. However, the method fails in some credit cards with strong background patterns.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2007.08b
• /
• pp.1165-1167
• /
• 2007

Delta doping method can separate the threshold voltage control region from the charge transport region in a-Si TFT, whereby the threshold voltage of a TFT could be modified. Threshold voltage could be changed by delta doping, while field effect mobility was estimated to be 80% of that of standard TFT.

• Journal of Information Display
• /
• v.11 no.1
• /
• pp.24-27
• /
• 2010

A novel stereo 3D LCD for passive interference filter glasses is presented. A demonstrator based on a standard 120Hz LCD was set up. Stereoscopic image separation was realized in a time-sequential mode using a LED-based scanning backlight with two complementary spectra. A stereo brightness of 3 cd/$m^2$ and a channel separation of 30:1 were achieved.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2008.10a
• /
• pp.765-768
• /
• 2008

To make 3D camera system, we check the possibility of advanced range camera module based on measuring the time delay of modulated infrared light, using a single detector chip fabricated on standard CMOS process. To depth information, electronic shutter and interlaced scanning method of 2D sensor is needed. Especially, we design "lens system, illumination unit" and review simulation result.

• Proceedings of the KIEE Conference
• /
• 1999.07e
• /
• pp.2022-2024
• /
• 1999

PDP(plasma display panel)is expected to be the standard of the next generation display devices. However, there is a serious problem. That is disturbances are occasionally observed in gray scales and colors when moving images are displayed on PDP. Various methods have been presented to reduce these disturbances. But the picture quality of PDP is not yet sufficient. We developed optimized-modified binary coded light emission scheme. Simulated result show the improving image quality. Also we have simulated and estimated various proposed methods.

• Journal of Korean Society for Quality Management
• /
• v.27 no.1
• /
• pp.211-222
• /
• 1999

6 Sigma is defined as the state of "defect free quality" with only 3.4 defective, goods out of 1 million. Samsung Display Device(SDD) was quick to embark on a new way of quality innovation. The goals of 6 Sigma campaign are established on the foundation of customer satisfaction such as quality, cost and service. Production field of SDD has a special 6 Sigma campaign, SQM(Standard Quality Management). Quality qualification system is introduced and implemented with strong reinforcement. C-S-I(Chart-Solve-Implement) model which was made by Dr. Bajaria(1991) is adopted for the project. All the workers of company will be encouraged to participate in the drive.

• Journal of Digital Contents Society
• /
• v.19 no.8
• /
• pp.1593-1601
• /
• 2018

The International Hydrographic Organization has developed the S-100 standard as a geospatial standard to express various types of hydrographic information. Product specification describes information of data on ENC such as definition, structure, data model, etc. S-129 PS is for under keel clearance management information. In this paper, to help developers to implement S-129 PS using the technology of S-100, we analyze the process to portray the S-100 based data and then implement a case study. This paper introduces the XSLT processing of portrayal engine to reform the generated data set, and the generation of drawing instructions to display the data set on the electronic chart. A case study is experimented to display the portrayal output of under keel clearance management on an electronic chart.