• 한국멀티미디어학회논문지
• /
• 제23권3호
• /
• pp.395-401
• /
• 2020

In this paper, a motion-based ROI extraction algorithm from a high resolution fisheye image is proposed for multi-view monitoring systems. Lately fisheye cameras are widely used because of the wide angle-of-view and they basically provide a lens correction functionality as well as various viewing modes. However, since the distortion-free angle of conventional algorithms is quite narrow due to the severe distortion ratio, there are lots of unintentional dead areas and they require much computation time in finding undistorted coordinates. Thus, the proposed algorithm adopts an image decimation and a motion detection methods, that can extract the undistorted ROI image with a standard angle-of-view for the fast and intelligent surveillance system. In addition, a mesh-type ROI is presented to reduce the lens correction time, so that this independent ROI scheme can parallelize and maximize the processor's utilization.

• 치과방사선
• /
• 제20권2호
• /
• pp.163-167
• /
• 1990

The author has evaluated the panoramic image of the mandibular condyle according to its horizontal condylar angle (0˚, 10˚, 20°, 30°, 40°) and mandibular position (standard, 25㎜ forward and reverse position). The results were as follows: 1. The larger the horizontal condylar angle was, the larger the horizontal magnification was in all positions. 2. In case of small horizontal condylar angle, profile view could be obtained in 25㎜ forward and reverse position. 3. In case of large horizontal condylar angle, profile view could not be obtained in any positions.

• 대한방사선기술학회지:방사선기술과학
• /
• 제44권5호
• /
• pp.443-449
• /
• 2021

In this study, the purpose is to present the foot inclination angle for realizing an image similar to that of the existing examination method and to present the clinical usefulness of the new examination method through comparison between the existing examination method and the newly designed standing foot oblique projection. A foot phantom was used, and the magnification of the image according to the angle was quantitatively evaluated by attaching a nut to the position of the cuboid of the phantom. The internal oblique image acquired using a 30° wedge was set as the standard image. And that image was compared with the images acquired by changing the angle of the foot from 20° to 65° at intervals of 5°. Image evaluation was performed by 3 radiological technologists, and qualitative evaluation using a Likert 5-point scale for evaluation items of true oblique view and quantitative evaluation of the value obtained by measuring the diameter of a nut in each image were performed as image evaluation. For data analysis, reliability analysis between the measure and comparative analysis of the average value for each angle were performed. The qualitative evaluation score for each image was 4.5 to 5 points for most questions in the case of the standard image. And 4 points or less for most questions in the images with a foot angle of 45° or less, and an evaluation score close to the standard image was obtained in the image of 50° or more. And in the quantitative evaluation, the diameter of the nut was measured to be 9.28~9.56 mm. The qualitative evaluation showed a reliability of 0.95~1.0 and the quantitative evaluation was 0.62. As a result of comparing and analyzing the average of the quantitative and qualitative average values for each angle image, the group with the average value most similar to the standard image was images obtained at 55° and 60°, and in the post-analysis, the images of both groups were the same group as the standard image(p<0.01). As a result of this study, it was found that the angle of inclination of the foot for realizing the image most similar to the existing image in the standing foot oblique projection is 55°~60°. In addition, if this test method is applied to the clinic, it is believed that it will help prevent safety accidents such as falls during the test and improve test efficiency by minimizing the movement of patients for the test.

• 복식문화연구
• /
• 제8권5호
• /
• pp.668-680
• /
• 2000

The study presents the general types and individual differences of the shape of the adult women's neck and shoulder in our country. It is based on the average value, the standard deviation, the maximum value, the standard deviation, the maximum value, the minimum value and c.v. measured from the women at the age of 19 through 64. The results of this study are as follows ; 1. The factors by factor analysis are five. The first is the size factors of the neck and shoulder. The second is shape factor of neck. The third is plane view and length factor of the neck. The fourth is the side view factor of the neck and shoulder. The fifth is the shape factor of shoulder. Therefore the shape of the neck and shoulder should be examined in the shape factors as well as in the size factors as well as in the size factors for the designing body-suitable clothes. 2. The factors of the concrete objects are the solid view of neck and shoulder, the cross-sectional view of neck line, side view of neck and shoulder and length of neck. The explainable measuring items for the factors are the difference of the length between lower neck round line and the 4㎝ above neck round line, the length of neck, the angle of inclination between fore neck and back neck, the angle of inclination of the side shoulder, the difference of the height between fore neck point and back neck point, the width of shoulder, the width of chest and the width of back. 3. The concrete objects of the neck and shoulder have five types ; Type Ⅰ is average type, Type Ⅱ is thick short neck and the drooping shoulder type, Type Ⅲ I is slender long neck and lean-back shoulder type, Type Ⅳ is thick and rising shoulder type and Type Ⅴ is slender and drooping shoulder type.

• 대한한의진단학회지
• /
• 제16권3호
• /
• pp.41-48
• /
• 2012

Objectives: The aims of this study are to design a optimized mechanical structure of digital tongue imaging system (DTIS) equipped with LEDs in aspects of object distance and camera angle of coverage. Methods and Results: We tried to find optimized object distance while recording a rectangular object of common tongue size. In case object distance is 22 cm or less, edge of the rectangle was not taken beyond the shooting range. In contrast, if object distance is 40 cm or more, the rectangle image was too small. Therefore when considering the variation of subjects, we selected distance of 35-40 cm as appropriate object distance for the DTIS. We also tried to find optimized angle between camera view axis and horizontal line. We photographed from the side of the face of 7 adults with exposed tongue. We drew an exposed tongue lines to connect the tongue tip points and the tongue root points by using the photos acquired from the side faces. And then we calculated the tongue exposure angles between the vertical line and the exposed tongue lines. Mean tongue exposure angle was $28.3^{\circ}$ when tongue was lightly exposed and $13.3^{\circ}$ when maximally. So we determined $73^{\circ}$ as appropriate slope angle of part in contact with face of the DTIS and by considering that the standard variation was great, we designed control gears to adjust the slope of the camera view axis and to regulate the object distance. Conclusions: We designed a optimized mechanical structure in object distance and slope angle of part in contact with face of the DTIS.

• 한국전기전자재료학회논문지
• /
• 제29권3호
• /
• pp.175-180
• /
• 2016

In this study, we proposed an optical compensation method to improve the symmetricity of contrast ratio for wide viewing angle IPS (in-plane switching) LCD. First, the phase retardation depending on the thickness of compensation film is calculated, and then the phase change is presented at the $Poincar{\acute{e}}$ sphere. The phase retardation and the polarization state of the light passing through the optical elements are caculated by using the EJMM (extended Jones matrix method). In addition, the transmittance and the contrast countour are also calculated by using the Berremann's $4{\times}4$ matrix method. The simulation is carried out for a IPS LC cell with positive A/C/A compensation film. From the standard deviation of the contrast ratio, we confirmed the symmetricity at each viewing angle is inversely proportional to the standard deviation and calculated the optimum design condition of the uniaxial compensation film for the IPS LCD.

• 대한인간공학회:학술대회논문집
• /
• 대한인간공학회 1997년도 추계학술대회논문집
• /
• pp.114-119
• /
• 1997

자동차 내장 설계의 주요 검토 사항으로 거주성, 조작성, 시인/시계성, 승강성, 적재성, 안전성 등 을 들 수 있다. 특히, 승용차의 주행 시 운전자는 주위 환경에서 일어나는 상황의 대부분을 눈을 통해 인식하게 되므로, 주행 중 운전자에게 충분한 시계를 확보해 주는 것이 자동차의 설계에서 중요한 요인 이 된다. 본 연구에서는 시계성을 중심으로 미국의 FMVSS(Federal Motor Vehicle Sfety Standard), 유럽의 EEC(European Economy Community), 한국공업규격 등에서 규정하고있는 시계 요소들을 조사 비교하고, 시계 성 평가의 기준으로 활용한다. 시계성을 평가하기 위해 전방가시거리, 전방수평시계, Inside Rear View Mirror와 Outside Rear View Mirror를 통해 볼 수 있는 Viewing angle, Inside Rear View Mirror와 95%ile Eyellipse와 높이 등의 요소를 측정하였다. 측정 결과는 승용차의 운전 공간 내의 0ptimal Eye Point를 결 정하는 데 이용되며, 시인/시계성을 개선하는 Seating Packaging Procedure 개발의 기초 자료로 활용될 수 있을 것이다.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2005년도 춘계학술대회 논문집 디스플레이 광소자 분야
• /
• pp.100-103
• /
• 2005

Homogeneously aligned nematic liquid crystal modes are representatively the -FFS (fringe-field switching) mode using liquid crystal (-LC) with negative dielectric anisotropy, the +FFS mode and the IPS (in-plane switching) mode using +LC with positive dielectric anisotropy. In view of image quality evaluation standard of LCD, we compared characteristics of the brightness, the contrast ratio (CR) and color shift when the modes have respectively optimized phase retardation values $(d{\Delta}n)$. Consequently, in the most sensitively viewing angle of a man's physical vision, both FFS modes have advantage over the IPS mode from the brightness & the CR point of view. We are also confirmed that the +FFS mode out of them shows the smallest color shift according to all viewing directions in grey levels.

• 한국의류학회지
• /
• 제26권1호
• /
• pp.15-26
• /
• 2002

The purpose of this study was to classier the somatotype of late middle-aged women and to analyze the characteristics of each somatotype. The subjects were 337 late middle-aged women and their age range os from 45 to 59 fears old. Data were collected through anthropometry and photometry and analyzed by factor analysis, cluster analysis and discriminant analysis. The results were as follows; 1. The result of factor analysis indicated that 9 factors were extracted through factor analysis and those factors comprised 83.56 percent of total valiance. 2. Using factor scores, cluster analysis was carried out and the subject were classified into 4 cluster. Each cluster was classified as their body front and side view contour. Type 1 is tall, slim, and lower balk is flat on the side. Type 2 is standard and lean-back type on the side. Type 3 is standard height and weight, H type in front, and belly-protruded on the side. Type 4 is short, fat, and the side is hip-protruded. 3. According to the stepwise discriminant analysis, the 9 important items in classifying the somatotype of the late middle-aged women are as follows ; lower back tilt angle, hip depth(back) -back waist depth(back), bust depth(fore) - anterior waist depth(fore), jugular fossa point(fore), upper back tilt angle, burst breadth -waist breadth, right shoulder tilt, height of shoulder - height of anterior waist, abdomen breath. The correct classification rate for these items is as exact as 84.62%.

• 대한방사선기술학회지:방사선기술과학
• /
• 제40권1호
• /
• pp.63-70
• /
• 2017

본 연구는 세기변조방사선 치료기술을 이용한 성문암 환자에게 사용되는 두 가지 상이한 열가소성 고정기구 마스크로 인한 환자위치잡이 오차를 비교 평가하고 자 하였다. 치료가 종료된 총 16명의 성문암 환자를 두 그룹으로 나누었고(기존마스크 vs. 변형마스크), 평균, 3D오차, 시스템과 랜덤오차를 구하여 환자위치잡이 오차를 비교하였다. 또한, 치료계획종양체적(PTV)에 대한 여백(margin)을 분석하였다. 3D오차에 대하여 기존 그룹은 $5.2{\pm}1.3mm$고, 변형그룹은 $5.9{\pm}0.7mm$로써, 변형마스크가 변형보다 13.6% 높았다. 시스템오차는 기존그룹(변형그룹)에서 좌표 x, y, z방향은 각각 1.7 mm (1.1 mm), 1.0 mm (1.8 mm), 1.5 mm (2.0 mm)였고, 회전각(roll angle)은 $0.8^{\circ}$ ($0.8^{\circ}$)였다. 랜덤오차는 변형그룹이 기존그룹에 비하여 좌표 x, y, z방향으로 10.9%, 1.7%, 23.1%로 낮았으나, 회전각은 12.4% 높았다. PTV여백에서 변형그룹은 좌표 x방향에 대하여 기존그룹에 비하여 31.8% 낮았으나, 반대로 좌표 y와 z방향에서는 기존그룹보다 각각 52.6%와 21.6%로 높았다. 성문암 세기변조방사선치료에서 변형된 마스크 사용은 고정기구의 변형으로 인한 환자위치잡이 오차는 수치적으로는 영향을 줄 수 있지만, 다양한 관점에서 고정기구 마스크에 대한 연구가 임상적인 측면에서 연구가 필요할 것으로 사료된다.