• Proceedings of the KIEE Conference
• /
• 2008.04c
• /
• pp.199-201
• /
• 2008

This paper persents charge/discharge system for small PV using micro-processor. Charge/discharge system designs a Buck converter and using constant voltage charge system because regular voltage is rather high a condenser. Besides, we did compensate for charge voltage of condenser through a temperature compensation circuit. We consists of a 170W stand-alone PV system to observe charge/discharge system character. In the result of search about output character we know that charge and discharge are smoothly running.

• Proceedings of the Korean Institute of IIIuminating and Electrical Installation Engineers Conference
• /
• 2009.10a
• /
• pp.291-295
• /
• 2009

Economic and environmental concerns over fossil fuels encourage the development of photovoltaic(PV) energy systems. Due to the intermittent nature of solar energy. energy storage is needed in a stand-alone PV system for the purpose of ensuring continuous power flow. Grid-connected PV system that supply power in a critical load demand require to curb power fluctuation. In this case. SCB is a effectiveness in controlling power variation due to intrinsic PV system. We propose the Matlab/Simulink dynamic model and power flow characteristics of a hybrid energy system with PV and SCB.

• Journal of Environmental Science International
• /
• v.5 no.6
• /
• pp.683-697
• /
• 1996

Industrial ventilation is a crucial engineering measure to protect workers from hazardous airborne contaminants. Designing a ventilation system is not an easy task. To solve this problem, many U. S. computer programs and softwares have been developed. In Korea, asoftware, called as VPMC, was developed by Korea Industrial Safety Corporation. But VPMC could not stand alone since it can be used to design not a hood, but a ventilation system. In this research, therefore, a preprocessing software was developed. It can be used to design general ventilation system, canopy hood, open surface tank hood. The program was written in Microsoft Visual Basic. In near future, this software will be incorporated into a total package software which can be used to design a whole ventilation system.

• Journal of the Korean Institute of Telematics and Electronics B
• /
• v.30B no.3
• /
• pp.1-9
• /
• 1993

This paper discusses issues on the disign and implementation of real-time automatic speaker verification system, as well as the performance analysis of the implemented system. The system employs TI's TMS320C25 digital signal processor TMS320C25 and high speed SRAMs. The system is designed to be used stand-alone as well as via hand-shaking with IBM-PC. The speech parameters used for speaker verification are PARCOR and LPC-cepstrum coefficients, and the employed decision logics are those based on the generalized weighted distance comcept. The implemented system showed the performance of 5.3% error rate for the PARCOR coefficient, and 4.7% error rate for the LPG-cepstrum coefficient.

• International conference on construction engineering and project management
• /
• 2007.03a
• /
• pp.440-449
• /
• 2007

This paper describes the efforts in developing several versions of bridge management system (BMS) in Taiwan. There were several versions of stand-alone BMS developed in Taiwan prior to the Ji-Ji earthquake that occurred in year 1999. Since many bridges were seriously damaged by this earthquake, the Ministry of Transportation and Communication determined to develop a nationwide BMS to have a better by control on the status of bridge maintenance. Implemented in year 2000, the Taiwan Bridge Management system (T-BMS) is now the dominating and mandatory system used by all the government agencies that are responsible for bridge maintenance. Having more then 25,000 bridges in its inventory, T-BMS has thousands of logins per month to update data in the relevant database. The experiences and difficulties of using such a nationwide bridge management system are discussed. Finally, future plans for BMS development are also proposed in this paper.

• Journal of Institute of Control, Robotics and Systems
• /
• v.8 no.12
• /
• pp.1036-1040
• /
• 2002

To process data of digital linescan camera, the frame grabber is essential to handle the data in low-level and in high speed more than 30 MHz stably. Traditional approaches to the development of hardware in vision system for the special purpose are mai y based on PC system, and are expensive and gigantic. Therefore, there are many difficulties in applying those in the field. So we investigate, in this paper, the implementation of FPGA for real-time processing of digital linescan camera. The system is not based on PC, but electronic device such as micropncessor. So it is expected that the use of FPGAs for low-level processing represents a fast, stable and inexpensive system. The experiments are carried out on the web guiding system in order to show the efficiency of the new image processor.

• Proceedings of the KIEE Conference
• /
• 2009.07a
• /
• pp.1066_1067
• /
• 2009

Wind power is one of most promising renewable energy. The output capacity of large wind turbine has been increased for off-shore application. Number of installation of small wind turbine also has been increased for the stand-alone and off-grid application of remote area and recently small wind turbine equipped with lamp on the pole is used for street lamp. Maximum wind energy must be extracted by wind turbine within rated wind speed. Power must be controlled to protect the system such as blade, generator, and power system above the rated wind speed. In this paper, small wind power system of 800W rating for battery charging is implemented and output power control by furling system is verified at wind tunnel test.

• Journal of Advanced Marine Engineering and Technology
• /
• v.36 no.1
• /
• pp.141-148
• /
• 2012

The power system of leisure ship has a character of stand-alone type, so it continuously checks the usable power. Especially, the leisure ship using renewable energy needs to adjust the power consumption of loads according to the usable power. Also, the important loads of leisure ship are different by operation mode. However, current power management system doesnot consider such character. This paper studied load management system of the SPMS(Smart Power Management System) and composed using the smart plug. The SPMS controls the loads depending on a user's pattern and character through variable priority number control. This control algorithm was verified through simulation of assumed user and situation using LabVIEW.

• Journal of Power Electronics
• /
• v.9 no.2
• /
• pp.267-274
• /
• 2009

This paper deals with a voltage and frequency (VF) controller for an isolated power generation system based on an asynchronous generator (AG) driven by a pico hydro turbine. The proposed controller is a combination of a static compensator (STATCOM) and an electronic load controller (ELC) for decoupled control of the reactive and active powers of the AG system to control the voltage and frequency respectively. The proposed generating system along with its VF controller is modeled in MATLAB using SIMULINK and PSB (Power System Block Sets) toolboxes. The performance of the controller is verified for the proposed system and feeding various types of consumer load such as linear/non-linear, balanced/unbalanced and dynamic loads.

• Proceedings of the KIEE Conference
• /
• 2002.11d
• /
• pp.304-308
• /
• 2002

This paper studies stand-alone photovoltaic array for solar lighting lamp. The solar lighting lamp has PV modules, batteries. and charge & discharge system. The charge efficiency is improved for the control of each battery which is divided the charge from the discharge to change the structure of existing solar lighting lamp charge & discharge system. so, the charge and discharge times are reduced of 50%. and the depth of discharge control can be controlled in the discharge cut off voltage. This can be effective of battery use. If a battery is out of order, this system can be executed for a regular period. so we saved the repair cost and developed of system's stabilization. It is possible economical effect to apply for solar lighting lamp used photovoltaic array.