• 대한전기학회논문지
• /
• 제37권1호
• /
• pp.33-39
• /
• 1988

In this paper, a stand-alone wound rotor induction generator system is proposed and its steady state characteristics are analyzed. It is shown that the self-excitation of the system can be acheined by exciting the rotor through the PWM inverter. The analysis is based upon the eguivalent circuit and the steady state dq model of the mahine. The results show that the proposed system can be made to generate constant voltage constant frequency power for various speed and load conditions.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2002년도 추계학술대회 논문집
• /
• pp.65-68
• /
• 2002

Most of the present demand in the world is met by fossil and nuclear power plants. A small part is met by renewable energy technologies. Among the renewable power sources, wind and solar energy have experienced a remarkably rapid growth in the past 10 years. Recently the utilization of wind power has been receiving close attention in this country, especially for the electrification of off-shore islands. The objective of this study is to demonstrate a small wind energy system as a stand-alone power source.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2012년도 전력전자학술대회 논문집
• /
• pp.258-259
• /
• 2012

This paper proposes a new control strategy to eliminate the harmonic components of stator current for stand-alone DFIG system feeding non-linear loads. In this method, the LSC operates as an active filter which is controlled by employing a proportional-integral and a resonant controller. And also, the stator current is used as the feedback signal for the compensator instead of the load current, so that the additional current sensor at the load side can be removed. The experiment is verified to validate the effectiveness of the proposed compensating method.

• 정보보호학회지
• /
• 제31권6호
• /
• pp.37-40
• /
• 2021

미국, 중국 등에 이어 국내에서도 KT에서 2021년 7월 5G 단독모드(StandAlone)를 상용화 하였다. 5G 비단독모드(Non-StandAlone)에서는 다년간 사용되었던 기존 LTE(Long Term Evolution) 망의 장비를 재활용하기 때문에 신규 장비의 도입은 5G 기지국으로 제한된다. 그러나 5G 단독모드에서는 새롭게 정의된 5G 장비들을 사용하기 때문에 이에 대한 위협 분석과 보안 기능의 정의에 따라 각 장비에 보안의 구현이 제대로 되어 있는지 검증하는 절차가 요구된다. 이러한 환경에서 본 논문은 5G 단독모드 기기의 보안 인증 현황을 제공하고자 한다.

• 한국정보처리학회:학술대회논문집
• /
• 한국정보처리학회 2020년도 추계학술발표대회
• /
• pp.284-287
• /
• 2020

현재 자율주행은 Stand Alone 으로 차량 자체적인 센서만을 이용해서 자율주행을 하고 있다. 이번 연구로 Stand Alone 하지 않은 서버 제어 방식의 자율주행 차량 개발이 가능해져 자율주행 차량의 센서와 연산장치가 줄어 차량의 가격이 줄어들며 이 시스템의 궁극적 목표인 자율주행 차량의 사고 감소에 큰 도움을 줄 것을 기대한다.

• 한국화재소방학회논문지
• /
• 제26권1호
• /
• pp.74-79
• /
• 2012

본 논문은 2011년 개정된 "감지기 형식승인 및 검정기술기준"에 적합한 단독경보형 감지기 개발에 관한 연구이다. 변경된 내용의 가장 큰 특징은 전원이다. 10년 이상 사용 가능한 단독경보형 감지기를 개발하기 위해 나노전력기술이 사용된 저전력 마이크로컨트롤러를 사용하였다. 마이크로컨트롤러의 슬립모드를 활용하고, 저전력의 전원감시부, 열감지부 및 연기감지부를 제작하여 저전력 단독경보형 감지기를 개발하였다. 특히, 비화재보를 줄이기 위해 단독경보형 감지기는 열연 복합식으로 개발되었다. 사용자는 딥스위치를 이용하여 열감지모드 또는 열 연기감지모드로 동작형태를 선택할 수 있다. 마이크로컨트롤러가 지원하는 RS-485 통신기능을 활용하여 유선으로 단독경보형 감지기 간에 통신이 가능하도록 하였다. 이로써 화재발생시 보다 넓은 지역까지 경보를 알릴 수 있고 비화재보를 줄인 열연 복합식 단독경보형 감지기를 개발하였다.

• Journal of Korean Neurosurgical Society
• /
• 제54권3호
• /
• pp.189-193
• /
• 2013

Objective : It remains debatable whether cervical spine fusion cages should be filled with any kind of bone or bone substitute. Cortical and subcortical bone from the anterior and posterior osteophytes of the segment could be used to fill the cage. The purposes of the present study are to evaluate the clinical outcomes and radiological outcomes including bone fusion and subsidence that occurred after anterior cervical discectomy and fusion using a stand-alone cage packed with local autobone graft. Methods : Thirty-one patients who underwent anterior cervical fusion using a stand-alone polyetheretherketone (PEEK) cage packed with local autobone graft from July 2009 to december 2011 were enrolled in this study. Bone fusion was assessed by cervical plain radiographs and computed tomographic scan. Nonunion was evaluated according to the absence of bony bridge on computed tomographic scan. Subsidence was defined as a ${\geq}2$ mm decrease of the interbody height at the final follow-up compared to that measured at the immediate postoperative period. Results : Subsidence was observed in 7 patients (22.6%). Of 7 patients with subsidence greater 2 mm, nonunion was developed in 3. Three patients with subsidence greater 2 mm were related with endplate damage during intraoperative endplate preparation. Solid bone fusion was achieved in 28 out of 31 patients (90.3%). Conclusion : With proper patient selection and careful endplate preparation, anterior cervical discectomy and fusion (ACDF) using a stand-alone PEEK cage packed with local autobone graft could be a good alternative to the standard ACDF techniques with plating.

• 전기학회논문지
• /
• 제66권5호
• /
• pp.757-764
• /
• 2017

As the reduction of greenhouse gases(GHGs) emission has become a global issue, the microgrid markets are growing rapidly. With the sudden changes in the market, Korean government suggested a new business model called 'Self-Sufficient Energy Islands'. Its main concern is a stand-alone microgrid composed of Distributed Energy Resources(DERs) such as Renewable Energy Sources(RESs), Energy Storage System(ESS) and Fuel Cell, in order to minimize the emission of GHGs. According to these trend, this paper is written to propose an optimal sizing method of DERs in a stand-alone microgrid by using Genetic Algorithm(GA), one of the representative stochastic methods. It is to minimize the net present cost with the variables, size of RESs and ESS. In the process for optimization, the sunless days are considered as additional constraints. Through the case study analysis, the size of DERs installed in a microgrid system has been computed using the proposed method in MATLAB. And the result of MATLAB is compared with that of HOMER(Hybrid Optimization of Multiple Energy Resources), a well-known energy modeling software.

• Journal of Electrical Engineering and Technology
• /
• 제12권4호
• /
• pp.1442-1448
• /
• 2017

Recently, electric power systems have been operating with tight margins and have reached their operational limits. Many researchers consider a microgrid as one of the best solutions to relieve that problem. The microgrid is generally powered by renewable energies that are connected through power converters. In contrast to the rotational machines in the conventional power plants, the converters do not have physical rotors, and therefore they do not have rotational inertia. Consequently, a stand-alone microgrid has no inertia when it is powered by the only converter-based-generators (CBGs). As a result, the relationship between power and frequency is not valid, and the grid frequency cannot represent the power balance between the generator and load. In this paper, a superconducting flywheel energy storage system (SFESS) is applied to an inertia-free stand-alone (IFSA) microgrid. The SFESS accelerates or decelerates its rotational speed by storing or releasing power, respectively, based on its rotational inertia. Then, power in the IFSA microgrid can be balanced by measuring the rotor speed in the SFESS. This method does not have an error accumulation problem, which must be considered for the state of charge (SOC) estimation in the battery energy storage system (BESS). The performance of the proposed method is verified by an electromagnetic transient (EMT) simulation.

• 한국항행학회논문지
• /
• 제20권5호
• /
• pp.433-439
• /
• 2016

저가형 GNSS (global navigation satellite system) 수신 모듈에 DGNSS (differential GNSS) 서비스를 적용하기 위한 방안으로 거리 영역의 보정정보를 위치 영역으로 투영한 후, stand-alone으로 산출한 위치에 적용하는 DGNSS-CP 방식이 제안된 바 있다. DGNSS-CP 를 상용 수신기 또는 휴대폰에 적용하기 위해서는 항법 방정식의 관측행렬을 이용하여 위치영역 투영 방정식을 구성하므로, 각 위성의 시선벡터를 산출하여야 한다. GNSS 항법 메시지, 배치 정보 등이 시선벡터 산출을 위하여 사용되는데, 각 방법에 따라 정확도와 연산량 등의 성능에 차이가 발생한다. 본 연구에서는 제시된 두 가지 시선벡터 산출 방식에 따라 DGNSS-CP의 성능에 어떠한 영향을 끼치는지 확인하기 위하여, Septentrio PolaRx4 Pro 수신기에서 stand-alone mode 로 저장된 데이터에 해당 알고리즘을 적용하였고, 배치 정보를 사용하는 방법이 궤도정보를 사용하는 방법에 비해 정확도 면에서는 그 성능이 RMS (root mean square) 0.1 m 가량 저하되는 반면, 연산량은 약 1/15수준으로 줄일 수 있음을 확인하였다.