• Human Ecology Research
• /
• v.54 no.1
• /
• pp.13-26
• /
• 2016

The purpose of this paper is to investigate the rationale behind the transformation process of unique shophouse spatial organization in Phnom Penh. We selected 20 representative shophouses located in the Chinese district of Phnom Penh according to construction period. A qualitative study methodology was applied and field surveys were conducted that included interviews with residents, photographs, sketches, measurements, collecting historic photos, and cataloging maps. Selected cases were analyzed in terms of: basic house data, urban block analysis, and unit analysis. Cases were then classified into two types: private courtyard shophouse (PCS) and shared courtyard shophouse (SCS). PCS refers to shophouse typology that maintains most of the characteristics of early shophouses while being transformed into a modern multi-story apartment within a limited one bay plot. However, SCS refers to shophouses adapted from the indigenous forms of PCS that evolved into a multi-storey and multi-family housing typology that includes features that might have been adapted from Western apartment buildings such as sharing a big courtyard, staircase and corridors. We conclude that shophouses in Phnom Penh have positively adopted a Western building typology, adapted it to local traditions, and finally formulated a new building type that represent indicators of a modernization process gradually accepted by society.

• Proceeding of Spring/Autumn Annual Conference of KHA
• /
• 2011.04a
• /
• pp.103-108
• /
• 2011

This study aims to understand the unique housing culture and decoration style in traditional Thai houses. Literature review and site visit were applied for the research method. A steep gable roof, a lifted floor structure on the pillars, a semi-enclosed central flatform(charn) and a outdoor staircase are important plastic elements of exterior decoration in Thai traditional houses. 'Panlom(windbreak on gable)' and 'fa loog fak(wall panel)' are the most unique elements which determine Thai traditional style. In Thai traditional style decoration, the beautifully carved wooden panels and decorations are also the most important factors. The decorations can be analyzed in the aspect of following perspectives. ; The characteristics of Thai traditional house decorations have been developed and evolved as result of influences from regional climate and local material. And also the social-cultural factors such as religion, social and family relationship and life style controlled the forms and culture of traditional housing form and culture. As a result, this study summarises and defines the outstanding and unique meaning and definition of the decoration in Thai traditional houses focused on central region in Thailand.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.26 no.11
• /
• pp.2421-2428
• /
• 2002

In this study, the failure probability of the degraded LP turbine blade steel was performed using the Monte Carlo simulation to apply variation of applied stress and strength. For this purpose, applied stress under the service condition of steady state was obtained by theoretical stress analysis and the maximum Von-Mises stress was 219MPa. The fatigue strength under rotating-bending load was evaluated by the staircase method. Furthermore, 3-parameter Weibull distribution was found to be most appropriate among assumed distributions when the probabilistic distributions of tensile and fatigue strength were determined by the proposed analysis. The failure probability with various loading conditions was derived from the strength-stress interference model and the characteristic factor of safety was also estimated.

• Journal of Ocean Engineering and Technology
• /
• v.17 no.4
• /
• pp.31-36
• /
• 2003

In case of this thick rolling-steel for a multistory building, a large oil-drilling structure, a large vessel, a bridge and so on, Lamella Tearing around the welded joint zone is the most serious problems. In order to prevent Lamella Tearing, not only is choice of material important, but also the comprehensive investigation for the structural design and the construction. The Lamella Tearing that is a staircase-shape occurs due to the contraction stress to the thickness direction of the plate and has the character that the cracks progress along the elongated inclusion by rolling. In general, because cracks occur at the heat affected zone and around HAZ, it is necessary to establish the safety and the confidence of the welded structure to restrain the welding defect such as Lamella Tearing. The mechanical approaches are the easier and more economical than the approaches of the material and the construction method. In addition, the appropriate welding profile and the optimum welding condition contribute toward the improvement of the productivity and influence on the standardization of the manufacturing technology.

• Proceedings of the KIPE Conference
• /
• 2011.07a
• /
• pp.429-430
• /
• 2011

This paper presents a simple and cost-effective stand-alone rapid battery charging system of 30kW for electric vehicles. The proposed system mainly consists of active front-end rectifier of neutral point clamped 3-level type and non-isolated bi-directional dc-dc converter of multi-phase interleaved half-bridge topology with coupled inductors. The charging system is designed to operate for both lithium-polymer and lithium-ion batteries. The complete charging sequence is made up of three sub-interval operating modes; pre-charging mode, constant-current mode, and constant-voltage mode. The pre-charging mode employs the staircase shaped current profile to accomplish shorter charging time while maintaining the reliable operation of the battery. The proposed system is able to reach the full-charge state within less than 16min for the battery capacity of 8kWh by supplying the charging current of 67A. The optimal discharging algorithm for Vehicle to the Grid (V2G) operation has been adopted to maintain the discharging current of 1C. Owing to the simple and compact power conversion scheme, the proposed solution has superior module-friendly mechanical structure which is absolutely required to realize flexible power expansion capability in a very high-current rapid charging system.

• Journal of the Korean Institute of Telematics and Electronics
• /
• v.22 no.2
• /
• pp.6-12
• /
• 1985

In this paper, self tuning control algorithm based on least square method is applied to the speed control of D.C. motor using Z-80 microprocessor as control unit. And the performance of algorithm is analyzed when the correlated noises of variance 20 and 80 are applied respectively. The convergence speed is measured and tracking is verified for the step and staircase wave reference input. Also it is shown that self tuning control algorithm is more attractive to the D.C. Totor speed control system regardless of power supply voltage and friction load changes than linear feedback control method which doesn't estimate parameters.

• Journal of Broadcast Engineering
• /
• v.13 no.6
• /
• pp.849-858
• /
• 2008

In this paper, a no-reference perceptual metric is proposed for image quality assessment. It measures the amount of overall blockiness and blurring of the image and evaluates the amount of ringing, staircase, and mosaic noises around the strong edges. Finally, the individual scores are combined by a fuzzy integral to generate the final quality score of the image. The quality scores obtained by the proposed algorithm show strong relationship with the MOS(Mean Opinion Score) values by experts.

• Journal of the Korean Institute of Telematics and Electronics
• /
• v.22 no.3
• /
• pp.68-76
• /
• 1985

A charge-coupled device (CCD) area image sensor has been demonstrated with an experi-mental 16$\times$16 prototype. The prototype is a vertical frame transfer charge.coupled imager using two-phase gate electrode structures. In this device, ion-implanted barriers are used for two -phase CCD, and NMOS process has been adopted. The total imaging setup consisting of optical lens, clock generators, clock drivels, staircase signal generators, and oscilloscope is easily achieved with the aid of PROM . English alphabets are displayed on the oscilloscope screen using the total imaging set-up. We measure charge transfer inefficiency and dark current for the fabricated devices.

• Journal of Biomedical Engineering Research
• /
• v.17 no.1
• /
• pp.1-10
• /
• 1996

In this paper, describe the automatic climbing wheelchair system use an articulated crawler mobile robot. This wheelchair system(call system) is composed of sensor detecting part and wireless communication part with PC. The sensor parts are consisted of sloping sensor and ultrasonic sensor part. The sloping sensor measures the sloping angle of system, and the ultrasonic sensor measures the distance of system's front wheel center from stair. PC will generate the operation data to climb up the stair using the measured data and make primitives for the system. At firsts This system transfer from sensor data to the PC. PC calculate the operation data to climb up the stair from the internal algorithm. We simulated the system in various stair angle slope($25^{\circ}$, $30^{\circ}$, $45^{\circ}$), and tested it on the real staircase with width 37cm, highlt 18cm, Angle $26^{\circ}$ . There were $0.350^{\circ}$ - $1.060^{\circ}$ Angle errors while climbing because adapted sensor has a precision $0.35^{\circ}$ in resolution. Finally, We implemented the sensor detecting part and the wireless communication park and practiced our system in 4cm/sec speed.

• Journal of the Institute of Convergence Signal Processing
• /
• v.5 no.1
• /
• pp.46-52
• /
• 2004

In this paper, we introduce a case study of developing a miniature humanoid robot which has 16 degrees of freedom, 42 cm heights, and 1.5kg weights. For easy implimentation, the integrated RC-servo motors are adopted as actuators and a digital camera is equipped on its head. So, it can transmit vision data to a remote host computer via wireless modem. The robot can perform staircase walking as well as straight walking and turning to any direction. The user-interface program running on the host computer contains a robot graphic simulator and a motion editor which are used to generate and verify the robot's walking motion. The experimental results show that the robot has various walking capability including straight walking, turning, and stairs walking.