• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2023.11a
• /
• pp.29-30
• /
• 2023

Wood is a construction material that has the advantages of carbon dioxide storage ability, noise reflection, and eco-friendliness. In order to use wood for a long time, you must use wood-specific paint, which is called oil stain. Oil stain improves water resistance and moisture resistance, but has the disadvantage of being weak against fire. This is because the oil contained in the oil stain causes a chemical reaction, and this chemical reaction causes the oil stain to spontaneously ignite, igniting nearby combustible materials and causing frequent fires. To improve this, in this study, different flame retardants were mixed and added to oil stain to produce functional oil stain. In addition, we would like to apply it to wood to check glow time and carbonization area. As a result of the experiment, it shows the best performance when mixed at 30(15 + 15)(%) and added to oil stain. The remaining burn time is satisfied from 10% for all samples, and the carbonized area is satisfied when it is 30%.

• Transactions of Materials Processing
• /
• v.28 no.2
• /
• pp.71-76
• /
• 2019

Corrosion resistance is one of the essential properties required in steel bolts. The various types of coatings are used to improve the corrosion resistance of steel bolts. But, roll formed, subsequently Zn alloy electrodeposited and top coated steel bolt easily takes place the white storage stain or white rust under high humidity condition. To investigate the corrosion resistance of roll formed and subsequently the various types of coated steel bolts, their polarization curves were measured by potentio-dynamic tester in this study. Based on the measured polarization curves, the more times of chromate and top coating on roll formed steel bolt, the higher corrosion resistance was shown. The roll formed steel bolt, which was Zn-Ni electro-deposited, two times chromated, one time inorganic top coated, one time organic top coated and annealed, showed the best corrosion resistance.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.11 no.5
• /
• pp.1741-1746
• /
• 2010

This study is on development of UV-cured anti-stain coating compounds which have more improved anti-stain function to prevent a surface of PVC tile from stain. To make an anti-stain coating composition, water soluble antistatic agent made from ammonium(IV) salt, antistatic agents for acrylic and polyurethane were used. Their contents varied from 5 to 20wt% against quantities of resin in coating composition. After coating PVC tiles using bar-coating method that can adjust a thickness, we estimated surface properties of coated layer such as anti-stain, electric resistance, adhesive power, thickness of coating, and so on. Results showed that a coating composition added 15wt% of water soluble antistatic agent and coated with No.12 bar-coater had the optimum surface property in electric resistance($3.24{\times}10^9{\Omega}/cm^2$), anti-stain(ink Test, Dust Test) and adhesive power. We could also find electric resistance and anti-stain effect were improved as antistatic agent content increased. However, excessive addition of antistatic agents(over 20wt%) caused the migration.

• Transactions of Materials Processing
• /
• v.21 no.5
• /
• pp.330-335
• /
• 2012

Roll formed steel bolts are electrodeposited with Zn-Ni to protect themselves from corrosion. However, white storage stain or white rust(corrosion) is found on Zn-Ni electrodeposited surface of steel bolts when they are exposed to moisture. In this paper a new process is introduced to protect Zn-Ni electrodeposited steel bolt from white storage stain or white rust for a long time under the salt spray test and high humidity test conditions. The better corrosion resistance could be gotten by the additional process of Ni-P electroless deposition and heat treatment to conventional manufacturing method of Zn-Ni coated steel bolt. The corrosion resistance of Zn-Al powder slurry coated steel bolt showed better than that of Zn-Ni electrodeposited one.

• The Journal of Korean Academy of Prosthodontics
• /
• v.37 no.4
• /
• pp.416-424
• /
• 1999

Simulation of naturally appearing enamel in fixed prosthodontics could be achieved with all ceramics. The purpose of this study was to investigate the stain resistance of 4 different all ceramics materials (In-ceram, IPS Empress, Celay, Vintage). Forty specimens were prepared using manifacture's instruction and the samples were divided into two groups. The specimens for one group were glazing and those for other group were ground to remove the glazing layer. All specimens were immersed in methylene-blue for 24hours. The color values for each specimen was measured with colorimeter (Mode Tc-6Fx, Tokyo Denshoku Co.) prior to and after immersion in methylene-blue. The following conclusions were drawn from this study. 1 The stain resistance of glazing ceramics was higher than that of unglazing ceramics. 2. The changes of ${\Delta}E^*$\;and\;L^*$ values were revealed in Vintage and unglazing Celay. 3. The changes of $a^*$ values were revealed in unglazing vintage, Celay, In-ceram. 4. The changes of $b^*$ value were revealed in Vintage, IPS Empress and unglazing Celay.

• Journal of the Korean Society of Costume
• /
• v.18
• /
• pp.283-289
• /
• 1992

In this paper, dyeing properties and colorfastness of ramie, flax, and cotton fabrics for direct dyes were compared. When dyed in a same liquor-goods ratio, in case of green dyes, colorfastness to light was similar for three fibers but in case of red dyes, cotton had a lower level. For colorfastness to laundering, there fibers were similar and three were no consistent differences. The degree of stain about white cotton fabric was higher in case of red dyes and it showed the difference of dye's properties. The degree of stain about white wool fabric showed the highs resistance or stain and little stain was seen. This result represented that the dyes. used were proper direct dyes for cellulosic fibers. For the difference of shade, the cotton was consistently brighter and the shade of ramie was darker than that of cotton and flax. This might mean that optical effects arose from the comparatively large cross-sectional size of the ramie fiber and its highly oriented structure.

• Korean Journal of Human Ecology
• /
• v.7 no.2
• /
• pp.75-80
• /
• 1998

In this paper, deying properties and colorfastness of ramie, flax, and cotton fabrics for direct dyes were compared. When dyed in a same dyeing bath ratio, in case of green dyes, colorfastness to light was similar for three fabrics but in case of red dyes, cotton had a lower level. For colorfastness to laundering, three fabrics were similar and there were no consistent differences. The degree of stain about white fabric cotton was highest in case of red dyes. The degree of stain about white fabric wool showed the high resistance of stain and little stain was seen. This result represented that the used dyes were proper direct dyes for cellulosic fibers. For the difference of shade, the cotton was cosistently brighter and the shade of ramie was darker than of cotton and flax. This might mean that optical effects arouse from the comparatively large cross-sectional size of the ramie fiber and its highly ordered structure.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2022.11a
• /
• pp.35-36
• /
• 2022

In order to supplement the flame-retardant performance of oil stain, which can prevent wooden buildings from contamination, (NH4)2HPO4, a phosphorus flame-retardant, was added to oil stain and applied for each type of plywood, and an experiment was conducted. The addition rate was set to 0-60%, but white powder appeared on the surface of plywood from 40% and thus it was impossible to experiment, so the maximum addition rate was selected as 30%. As a result of the experiment, acacia plywood had the best performance. As the rate of addition of the flame retardant increased, the remaining time and carbonization length of all plywood decreased, but the carbonization length of the MDF plywood was not met with the standards.

• Journal of the Korean Ceramic Society
• /
• v.24 no.2
• /
• pp.155-160
• /
• 1987

The investigation includes the application of $ZrSiO_4-Cd(SxSe_{1-x})$stain to ceramic body. The currently developed stain was compared to the commercially available stain in applying to ceremic glaze. Two stains (currently developed and commecially available) were mixed with frits and applied to ceramic tiles. The tiles were fired at 850 to 120$0^{\circ}C$ and tested by colorimeter in X.Y.Z. axis of the wavelength ranging from 580nm to 650nm. Applicability 18 stains to ceramic body was investigated by ISCC-NBS of Munsell color nomenclature. $ZrSiO_4-Cd(SxSe_{1-x})$stain is as good as V and Pr series stain in mixing composition of frits 9 to 1. It maintains red color at 100$0^{\circ}C$ in the mixture of frits, and shows as the strong acid resistance stain.

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 2004.08a
• /
• pp.268-276
• /
• 2004

As recent demands for cold rolling oil for steel, not only better lubricity, but cost reduction and improvement of work environment are increasingly required. In order to respond these demands, Nihon Parkerizing has developed rolling oils with completely new emulsification system. Comparing with conventional oils, the new system indicates better iron fine removability to maintain oil concentration, due to better iron fine dispersion, and superior mill stain resistance by spray stain test.