• 제목/요약/키워드: Stagnation Pressure

검색결과 158건 처리시간 0.036초

2차목에 의한 고고도 모사용 초음속 디퓨져 시동성능 향상 (Improvement of Starting Performance in Supersonic Exhaust Diffuser with Second Throat for High Altitude Simulation)

  • 박성현;박병훈;임지환;윤웅섭
    • 한국추진공학회:학술대회논문집
    • /
    • 한국추진공학회 2008년도 제30회 춘계학술대회논문집
    • /
    • pp.321-327
    • /
    • 2008
  • 초음속 디퓨져를 사용하는 고도모사 장치에서 기존에 연구되었던 일정단면적 형태를 개선해 2차 목 형태 디퓨져의 효과를 고찰하였다. 기 수행 된 일정단면적 디퓨져 정상상태 해석 결과 및 공압시험 데이터를 바탕으로 본 연구의 해석방법을 검증하고, 2차목에 의한 효과를 정량화시키기 위해 노즐전압력과 2차목 면적에 따른 시동성능과 진공챔버압력 변화에 관하여 해석하였다. 일정단면적 디퓨져 내부 벽면 및 중심축을 따른 압력데이터 비교에서 일치하는 거동을 확인했으며, 2차목의 사용에 의해 시동을 위한 노즐 전압력이 현저히 낮아짐을 알 수 있었다. 저팽창비 노즐 사용으로 인하여 2차목에 의한 진공챔버 내 압력 변화는 거의 없음을 관찰하였다.

  • PDF

신규 건설 ADD 천음속풍동 소개 및 AGARD 표준모형 공력계수 비교 (New ADD Injection Driven Transonic Wind Tunnel and Test With the AGARD Model)

  • 서경원;이종건;신성범;한상현;박금용;김영준;김남균;진현
    • 한국항공우주학회지
    • /
    • 제48권2호
    • /
    • pp.119-125
    • /
    • 2020
  • 본 논문에서는 국방과학연구소에서 신규 건설한 천음속풍동을 소개하고 성능에 대하여 기술하였다. 천음속풍동은 인젝터구동(Injection Driven), 폐회로(Closed Circuit) 방식의 풍동으로 시험부 크기가 가로, 세로 각각 1.5m이다. 마하수는 0.3에서 1.2까지 연속적으로 변화가능하며, 노즐을 교체하여 마하수 1.4 실험이 가능하다. 풍동의 전압력(Total Pressure)을 100kPa에서 550kPa까지 변화시킬 수 있으며, 그에 따라 레이놀즈수(Reynolds Number)를 크게 변화시켜 실험을 수행할 수 있다. 풍동의 성능을 검증하기 위하여 AGARD-B 표준모형을 이용하여 6분력 공력계수 측정 실험을 수행하였으며, 그 결과를 국과연 삼중음속풍동 및 세계 여러 풍동의 실험결과와 비교 분석하였다.

미세유체의 효율적인 액적 합류를 위한 정체현상 조절 (Stagnation of Droplet for Efficient Merging in Microfluidic System)

  • 진시형;김종민;장성찬;노영무;이창수
    • Korean Chemical Engineering Research
    • /
    • 제52권1호
    • /
    • pp.106-112
    • /
    • 2014
  • 본 연구에서는 미세액적을 효과적으로 합류시키기 위하여 미세기둥 구조들에 따른 영향 및 정체 현상 조절에 관한 연구를 수행하였다. 최적의 미세액적 합류조건을 찾기 위하여 매우 정교하게 조절이 가능한 미세 밸브를 접목하였다. 수용성 미세액적은 연속상으로 0.5 wt% Span 80이 함유된 미네랄 오일을 사용하였다. 합류과정은 미세유체 칩 내부에 위치한 미세기둥의 구조와 배치를 통해 액적 주위의 압력과 액적 내부의 라플라스 압력의 차이를 조정하여 수행된다. 마지막으로 최적의 합류 구조를 지닌 미세유체시스템에서 효소 생화학반응 실험을 수행함으로써 본 장치가 생물학 및 생화학 실험을 수행하는 유용한 도구로서 사용될 수 있음을 입증하였다.

환형 캐스케이드 내 고정된 터빈 블레이드 및 슈라우드에서의 열/물질전달 특성 (I) - 블레이드 끝단 인접 표면 - (Heat/Mass Transfer Characteristics on Stationary Turbine Blade and Shroud in a Low Speed Annular Cascade (I) - Near-tip Blade Surface -)

  • 이동호;조형희
    • 대한기계학회논문집B
    • /
    • 제29권4호
    • /
    • pp.485-494
    • /
    • 2005
  • For the extensive investigation of local heat/mass transfer on the near-tip surface of turbine blade, experiments were conducted in a low speed stationary annular cascade. The turbine test section has a single stage composed of sixteen guide vanes and blades. The chord length and the height of the tested blade are 150 mm and about 125 mm, respectively. The blade has flat tip geometry and the mean tip clearance is about $2.5{\%}$ of the blade chord. Detailed mass transfer coefficient on the blade near-tip surface was obtained using a naphthalene sublimation technique. The inlet flow Reynolds number based on chord length and incoming flow velocity is changed from $1.0{\times}10^{5}\;to\;2.3{\times}10^{5}.$ Extremely complex heat transfer characteristics are observed on the blade surface due, to complicated flow patterns, such as flow acceleration, laminarization, transition, separation bubble and tip leakage flow. Especially, the suction side surface of the blade has higher heat/mass transfer coefficients and more complex distribution than the pressure side surface, which is related to the leakage flow. For all the tested Reynolds numbers, the heat/mass transfer characteristics on the turbine blade are the similar. The overall averaged $Sh_{c}$ values are proportional to $Re_{c}^{0.5}$ on the stagnation region and the laminar flow region such as the pressure side surface. However, since the flow is fully turbulent in the near-tip region, the heat/mass transfer coefficients are proportional to $Re_{c}^{0.8}.$

반복 레이저 펄스를 이용한 초음속 비행체의 항력저감 (Wave Drag Reduction due to Repetitive Laser Pulses)

  • 김재형;;김희동
    • 한국추진공학회:학술대회논문집
    • /
    • 한국추진공학회 2011년도 제36회 춘계학술대회논문집
    • /
    • pp.381-384
    • /
    • 2011
  • 본 연구에서는 초음속 비행체의 조파저항을 감소시키기 위하여, 최대 주파수 80 kHz의 반복 레이저 펄스에 의해 야기된 에너지 부가법에 관한 실험적 연구가 수행된다. 기류 마하수 1.94의 흡입식 초음속 풍동의 바깥에 설치된 초점렌즈에 의하여 레이저 펄스가 실린더 모델 전단부에 집약된다. 시간변동 항력과 정체압력은 로드셀과 PCB 압력센서에 의해서 측정되며, 동시에 고속 카메라를 이용하여 가시화가 수행된다. 본 연구의 결과로부터, 레이저 펄스 에너지 부가에 의한 항력 저감량은 레이저 펄스 주파수가 증가할 때, 최대 21%까지 거의 선형적으로 증가하였다. 부가 에너지 효율은 레이저 펄스 에너지에만 의존하는 결과를 얻었으며, 최대 1000%까지 달성되었다.

  • PDF

배기가스 세정장치내 유체 유동에 대한 다공성 매질 적용 기반의 전산해석적 연구 (Computational Study on the Application of Porous Media to Fluid Flow in Exhaust Gas Scrubbers)

  • 홍진표;윤상환;윤현규;김래성;안준태
    • 한국기계가공학회지
    • /
    • 제21권2호
    • /
    • pp.1-10
    • /
    • 2022
  • Exhaust gases emitted from internal combustion engines contain nitrogen oxides (NOx) and sulfur oxides (SOx), which are major air pollutants causing acid rain, respiratory diseases, and photochemical smog. As a countermeasure, scrubber systems are being studied extensively. In this study, the pressure drop characteristics were analyzed by changing the exhaust gas inflow velocity using a scrubber for a 700 kW engine as a model. In addition, the fluid flow inside the scrubber and the behavioral characteristics of the droplets were studied using CFD, and the design compatibility of the cleaning device was verified. Flow analysis was performed using inertial and viscous resistances by applying porous media to the complex shape of the scrubber. The speed of the exhaust passing through the outlet nozzle from the inlet was determined through the droplet behavior analysis by spraying, and the flow characteristics for the pressure drop were studied. In addition, it was confirmed through computational analysis whether there was a stagnation section in the exhaust gas flow in the scrubber or the sprayed droplets were in good contact with the exhaust gas.

블로킹에 의한 2014년 2월 동해안 지방 폭설 분석 (Analysis of the February 2014 East Coast Heavy SnowFall Case Due to Blocking)

  • 배정호;민기홍
    • 대기
    • /
    • 제26권2호
    • /
    • pp.227-241
    • /
    • 2016
  • This study investigated the cause of the heavy snowfall that occurred in the East Coast of Korea from 6 February to 14 February 2014. The synoptic conditions were analyzed using blocking index, equivalent potential temperature, potential vorticity, maritime temperature difference, temperature advection, and ground convergence. During the case period, a large blocking pattern developed over the Western Pacific causing the flow to be stagnant, and there was a North-South oriented High-to-Low pressure system over the Korean Peninsula because of this arrangement. The case period was divided into three parts based on the synoptic forcing that was responsible for the heavy snowfall; detailed analyses were conducted for the first and last period. In the first period, a heavy snowfall occurred over the entire Korean Peninsula due to strong updrafts from baroclinic instability and a low pressure caused by potential vorticity located at the mid-troposphere. In the lower atmosphere, a North-South oriented High-to-Low pressure system over the Eastern Korea intensified the easterly airflow and created a convergence zone near the ground which strengthened the upslope effect of the Taebaek Mountain range with a cumulative fresh snowfall amount of 41 cm in the East Coast region. In the last period, the cold air nestled in the Maritime Province of Siberia and Manchuria strengthened much more than that in the first half and extended to the East Sea. The temperature difference between the 850 hPa air and the SST was large and convective clouds developed over the sea. The highest cumulative fresh snow amount of 39.7 cm was recorded in the coastal area during this period. During the entire period, vertically oriented equivalent potential temperature showed neutral stability layer that helped the cloud formation and development in the East Coast. The 2014 heavy snowfall case over the East Coast provinces of Korea were due to: 1) stagnation of the system by blocking pattern, 2) the dynamic effect of mid-level potential vorticity of 1.6 PVU, 3) the easterly air flow from North-South oriented High-to-Low pressure system, 4) the existence of vertically oriented neutral stable layer, and 5) the expansion of strong cold air into the East Sea which created a large temperature difference between the air and the ocean.

받음각을 갖는 평판보의 유동 여기진동에 관한 연구 (A Study on Flow Induced Vibration of Cantilever Plate with Angle of Attack)

  • 이기백;손창민;김봉환
    • 대한기계학회논문집
    • /
    • 제15권6호
    • /
    • pp.1919-1932
    • /
    • 1991
  • 본 연구에서는 고강도 알루미늄 합금으로 제작된 평판보의 받음각(.alpha.)를 10˚ 에서 30˚까지 10˚씩 변화시킨 3가지의 모델에 대해, 각 모델의 Re$_{d}$수 변화에 대한 후류의 스펙트럼분석, 레이저 도플러 유속계(laser doppler velocimetry)를 이용 한 유동장 해석 및 평판보의 응답을 실험을 통해 조사, 분석하고 유동장과 측정이 용 이하지 않은 얇은 평판주위의 압력분포에 대한 전산해석을 수행함으로써 유동 여기진 동 구조의 규명을 시도하였다.다.

고혈압 환자에서 혈압 조절 여부에 따른 기혈수(氣血水) 변증(辨證)과 삶의 질 비교 (A Comparison of Controlled and Uncontrolled Hypertension Groups Regarding Comprehensive Diagnosis of Qi Blood Water and Quality of Life)

  • 최인영;한창호;최동준;정승현;신길조
    • 대한한방내과학회지
    • /
    • 제31권4호
    • /
    • pp.880-891
    • /
    • 2010
  • This study is about a comparison of controlled and uncontrolled hypertension groups regarding comprehensive diagnosis of Qi blood water and quality of life. We surveyed "controlled and uncontrolled hypertension patients" using questionnaires for comprehensive diagnosis of Qi blood water, SF-36 and HTN QoL (Measurement Scale for the quality of life in hypertensive patients). There was no difference in comprehensive diagnosis of Qi blood water between the controlled and uncontrolled hypertension groups. Within the controlled hypertension group, the patients diagnosed with a Qi deficiency, Qi stagnation, Qi counterflow, blood deficiency, and water retention received lower total scores in SF-36 and HTN QoL than in undiagnosed patients. Within the uncontrolled hypertension group, the patients diagnosed with Qi deficiency, blood deficiency, and water retention got lower total scores in SF-36 and HTN QoL than in undiagnosed patients. These results were statistically significant. These results are insufficient that we and use comprehensive diagnosis of Qi blood water for a diagnosis tool of hypertension. But if we have better studies that make up for weak points, these results will help to make a diagnosis tool for hypertension.

항공기 무장시스템 Gun Gas 공력특성에 관한 연구 (Aerodynamic Effects of Gun Gas on the Aircraft's Armament System)

  • 최형준;김승한
    • 한국산학기술학회논문지
    • /
    • 제21권5호
    • /
    • pp.623-629
    • /
    • 2020
  • 본 연구는 항공기 기총발사 비행조건에서 Gun Port 주변 공기 유동장을 분석하여 디버터(Diverter) 옵션 형상에 따른 Gun Gas 유동량 및 경로를 확인하고 항공기 성능 및 안전성 영향을 확인하였다. Gun Port Diverter는 기총사격 시 발생하는 열을 효과적으로 낮춰주는 역할을 할 뿐아니라 Gun Gas를 상향방향으로 효율적으로 배출시키는 역할을 수행하며, 그 형상에 따라 Gun Gas 경로가 변경될 수 있다. 후방 Gun Port Diverter의 옵션 형상에 따라 기총 발사 시 Gun Gas의 유량, 경로, 압력을 분석하였다. Gun Port 내부 속도분포와 온도변화를 분석한 결과 후방 Diverter를 지나는 유량은 옵션 형상에 따라 급격이 감소하는 경향을 보이지만, 전방을 지나는 유량은 변화가 적은 비슷한 경향을 보임을 확인하였다. 따라서 기총발사 시 발생하는 Gun Gas는 후방 Gun Port Diverter 옵션 형상과 관계없이 항공기 표면에서 충분한 유동 거리가 확보되며, Diverter 옵션 형상에 따른 Gun Gas 유동의 정체는 Gun Port 내부 온도 상승에 큰 영향을 미침을 확인하였다.