• Proceedings of the Korean Vacuum Society Conference
• /
• 2011.02a
• /
• pp.159-159
• /
• 2011

Among the semiconductor ternary compounds in the I-III-$VI_2$ series, $CulnS_2$ ($CulnSe_2$) are one of the promising materials for photovoltaic applications because of the suitability of their electrical and optical properties. The $CuInS_2$ thin film is one of I-III-$VI_2$ type semiconductors, which crystallizes in the chalcopyrite structure. Its direct band gap of 1.5 eV, high absorption coefficient and environmental viewpoint that $CuInS_2$ does not contain any toxic constituents make it suitable for terrestrial photovoltaic applications. A variety of techniques have been applied to deposit $CuInS_2$ thin films, such as single/double source evaporation, coevaporation, rf sputtering, chemical vapor deposition and chemical spray pyrolysis. This is the first report that $CuInS_2$ thin films have been prepared by Aerosol Jet Deposition (AJD) technique which is a novel and attractive method because thin films with high deposition rate can be grown at very low cost. In this study, $CuInS_2$ thin films have been prepared by Aerosol Jet Deposition (AJD) method which employs a nozzle expansion. The mixed fluid is expanded through the nozzle into the chamber evacuated in a lower pressure to deposit $CuInS_2$ films on Mo coated glass substrate. In this AJD system, the characteristics of $CuInS_2$ films are dependent on various deposition parameters, such as compositional ratio of precursor solution, flow rate of carrier gas, stagnation pressure, substrate temperature, nozzle shape, nozzle size and chamber pressure, etc. In this report, $CuInS_2$ thin films are deposited using the deposition parameters such as the compositional ratio of the precursor solution and the substrate temperature. The deposited $CuInS_2$ thin films will be analyzed in terms of deposition rate, crystal structure, and optical properties.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.30 no.6
• /
• pp.61-68
• /
• 2002

Combustion characteristics of dual transverse injection of hydrogen in supersonic air flows were studied using computational methods. Three-dimensional Navier-Stokes with a non-equilibrium chemical reaction model and the k-$\omega$ SST turbulence model were used. A parametric study was conducted with the variation of the distance between two injectors. Combustion characteristics of dual injection are very different from those of single injection. The combustion characteristics of two injection flows are very different from each other, and the ignition and combustion characteristics of the rear injection flow are strongly influenced by those of the front injection flow. The increase of the distance between two injectors up to a specific distance results in the increase of burning rate. However, the increase of the distance over the specific distance gives no increase of burning rate but makes more losses of stagnation pressure. From the results it can be stated that there exists a distance between two injectors for optimum combustion characteristics.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.39 no.8
• /
• pp.735-743
• /
• 2011

In this study, the distribution of surface pressure was measured in a steady state on a turbine blade which was moved the injected region and receded the stagnation region using a linear cascade apparatus. Axial-type blades were used and the blade chord was 200mm. The rectangular nozzle was applied and its size was $200mm{\times}200mm$. The experiment was done at $3{\times}10^5$ of Reynolds number based on the chord. The surface pressures on the blade were measured at three different nozzle angles of $58^{\circ}$, $65^{\circ}$ and $72^{\circ}$ for off-design performance test. In addition, three different solidities of 1.25, 1.38 and 1.67 were applied. From the results, the low solidity caused the low pressure on the blade suction surface at entering region and the reverse rotating force was generated at the low nozzle angle. The positive incidence also made the pressure lower on the suction surface at entering region.

• Herbal Formula Science
• /
• v.19 no.1
• /
• pp.79-90
• /
• 2011

Objectives : This study was performed to analysis the composition of herbal formulations about a series of Wolgug-Hwan(WGH, formed by Gukchur-won and Sagung-san) in Dongeuibogam written by Heo Jun. Methods : The series of WGH in Dongeuibogam were selected by 'Prescription Lineage Graph' (http://164.125.206.43/PrescriptionLineageGraph.aspx) established by prof. Lee at Pusan National University. In the analysis of a series of WGH, we used some formulation books including classics. Results : Gaeuldogi-tang(GDT) is formed by WGH, Yeonggangchulgam-tang(YGT), Yugil-san (YIS) and Gungchul-san. Cheongul-san(CUS) is formed by WGH, Ijin-tang(IJT), YGT and Haegeum -hwan(HGH). Sosikcheongul-san(SCS) is formed by CUS and IJT. Jeungmiijin-tang(JIT) is formed by WGH, IJT, Sambaek-tang and Gyullyeonjichul-hwan. Sihoeokgan-tang(SET) is formed by WGH, Sihosogan-san(SSS) and Jigolpi-eum. Wolgukbohwa-hwan(WBH) is formed by WGH, Bohwa-hwan, Mokyangjichul-hwan and Hwangnyeon-tang(HNT). Chimsa-hwan(CSH) is formed by WGH, Injinho-tang(IHT), Yungmisamneung-hwan, Jeungmisamul-tang and Sinseongugi-tang. Conclusions : SCS, CUS, or JIT has been used frequently in case of phlegm-fire. These are formulated by the combination of WGH and IJT with Samseon-san or HGH or Jichul-hwan according to the special symptoms, respectively. SET which is formulated by WGH and SSS has been used in case of stagnation of liver-qi. GDT, WBH or CSH has been used in damp-heat. These are formulated by the combination of WGH with YIS, HNT, or IHT, respectively.

• Journal of the Korea Institute of Building Construction
• /
• v.13 no.2
• /
• pp.193-201
• /
• 2013

Recently there has been insignificant growth in the Korean construction management (CM) market, in comparison to the previous year. However, despite stagnation or even decreasing growth trends, the number of domestic companies participating in the CM market has increased rapidly. As follows, market movements of CM despite trending in stagnant growth or decrease, the market has been increasing firms which entry the market. The reasons for such dynamic change must be examined first, in order to facilitate analysis of its competitive structure. This study aims to examine the market competition structure and analyze the reason for proliferation of companies in the sick CM market. This study employs market concentration ratio and DEA-based Malmquist productivity indices to analyze the competitive structure of the CM market. Results reveal that the CM market has been monopolized by a few companies, but this is gradually changing. In addition, these companies were not productive, but there has been a gradual increase in the productivity index. Therefore, this study, which provides the direction index of the CM market, has implications for all major stakeholders in this market.

• Journal of the Korean Geographical Society
• /
• v.45 no.6
• /
• pp.748-765
• /
• 2010

This study aims to investigate the difference of synoptic characteristics over East Asia according to the persistence of rainfall in Korea during the Changma season (June and July). In the cases of consecutive rainfall which lasts four or more days, there are developed ridges in 850hPa level east of the Korean peninsula which introduce stagnation of the synoptic cyclone over Korea. An cold area in 850hPa level moves southward from the Northern China in one day before the beginning the rainfall day in Korea and it aids the development of the stationary front in East Asia. When rainfall lasts a day or two, cyclones pass over Korea in rainy day and the stationary front in East Asia is not intensified. In both cases the synoptic cyclones near the Korean peninsula shows a deep-baroclinic structure, while in the former cases over the southwestern part of Japan a subtropical frontal zone which has a shallow structure appears near Japan. In latter cases the frontal structures are same near Korea and Japan. So, this means that the Changma is not necessarily similar to the Baiu of Japan in all cases.

• Korean Chemical Engineering Research
• /
• v.52 no.1
• /
• pp.106-112
• /
• 2014

Here, we demonstrated the optimum design of pillar microstructure for efficient microdroplet merging. The microfluidic device mainly consisted of programmable microvalves and pillar microstructures. Based on the system, aqueous droplets were continuously generated at T-junction using actuating of integrated programmable microvalaves under the immiscible continuous fluid (mineral oil containing 0.5 wt% Span 80). The principle of merging process depended on the competitive correlation of hydraulic pressure of continuous phase and Laplace pressure of the droplet. We found that the design of the micropillars controls above two pressures. Finally, it was demonstrated that the microfluidic system could be able to efficient biochemical reaction. We expect that the microfluidic system is useful analytical or reaction tools in fundamental science, biotechnology, and chemical engineering.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.33 no.4
• /
• pp.79-84
• /
• 2005

An experimental investigation for impingement of under-expanded, axisymmetric jets on a flat plate has been conducted, and the surface pressure, the adiabatic wall temperature distributions on the plate have been measured in detail. For the explanation on the wall temperature distributions, the total temperature distributions along a free jet have also been measured with total temperature probes. In this study, the under-expansion ratio and the nozzle-to-plate distance have been considered as experimental parameters. Depending on nozzle-to-plate distances, different distributions of adiabatic wall temperature are shown by the energy separation at a jet edge and a impinged surface. Also, the recovery factor on a stagnation point decreases significantly due to the isolation of fluid particles in a central region.

• Wind and Structures
• /
• v.20 no.5
• /
• pp.643-660
• /
• 2015

The wind tunnel test of large-scale sectional model and computational fluid dynamics (CFD) are employed for the purpose of studying the aerodynamic appendices and mechanism on suppression for the vortex-induced vibration (VIV). This paper takes the HongKong-Zhuhai-Macao Bridge as an example to conduct the wind tunnel test of large-scale sectional model. The results of wind tunnel test show that it is the crash barrier that induces the vertical VIV. CFD numerical simulation results show that the distance between the curb and crash barrier is not long enough to accelerate the flow velocity between them, resulting in an approximate stagnation region forming behind those two, where the continuous vortex-shedding occurs, giving rise to the vertical VIV in the end. According to the above, 3 types of wind fairing (trapezoidal, airfoil and smaller airfoil) are proposed to accelerate the flow velocity between the crash barrier and curb in order to avoid the continuous vortex-shedding. Both of the CFD numerical simulation and the velocity field measurement show that the flow velocity of all the measuring points in case of the section with airfoil wind fairing, can be increased greatly compared to the results of original section, and the energy is reduced considerably at the natural frequency, indicating that the wind fairing do accelerate the flow velocity behind the crash barrier. Wind tunnel tests in case of the sections with three different countermeasures mentioned above are conducted and the results compared with the original section show that all the three different countermeasures can be used to control VIV to varying degrees.

• The Journal of Korean Medicine Ophthalmology and Otolaryngology and Dermatology
• /
• v.16 no.2
• /
• pp.221-243
• /
• 2003

Sudden sensorineural hearing loss may be defined as a severe loss of hearing occurring within a short space of time without any obvious cause. Its etiology is not verified yet, treatment and prognosis are uncertain. Objectives: We reviewed 6 cases of patients who hospitalized in Kyunghee Oriental Medical Center Dept. of Otolaryngology. Using the criteria of Siegel and Research Team of the Japanese Ministry of Health and Welfare of Japan, We are to evaluate the effect of Herb medication, Acupuncture therapy, and Negative therapy. We also attempted to search effective methods of therapy of sudden sensorineural hearing loss. Methods: We treated them with Oyaksunki-san(烏藥順氣散) for softening qi-stagnation and supressing 'Wind'(順氣治風), Chungsimjihwang-tang(淸心地黃湯) for strengthening 'Heart' and 'Kidney'(補心益腎), Boikyangwi-tang(補益養胃湯) for strengthening 'Wi-qi' and 'Stomach'(補衛(胃)氣). We also used acupuncture therapy and negative therapy based on the textbook of Acupuncture and Moxibustion. Results: One patient recovered completely after 5 days therapy, two patient markedly, another two patient slightly and one patient had no improvement. Conclusions: To treat sudden hearing loss, we can use Oyaksunki-san(烏藥順氣散) in the early stage of the disease. We can treat with Chungsimjihwang-tang(淸心地黃湯) and Boikyangwi-tang(補益養胃湯) in the late period of the disease, and administer Jaeumgenby-tang(滋蔭健脾湯) for suppressing tinnitus. If there is evidence of viral infection and the patient have too severe hearing loss, We can also use steroid in combination with Herb medication in the early stage of the disease. The Western medicine demonstrated that the start time of treatment had influence on recovery. If we started Oriental medical treatment within a week from the onset of sudden deafness. we will obtain the desired results. As the Western medical treatment does, Oriental medical therapy may have no effect after one month from onset of the disease.