• Proceedings of the KIPE Conference
• /
• 2005.07a
• /
• pp.279-282
• /
• 2005

Recently, due to the launching of digital broadcasting service, a demand of PDP TV with large screen size is sharply rising. PDP power module is mainly divided into power factor correction (PFC) stage and sustaining power stage. Especially, sustaining power module has pulsating load characteristics. So, the hard switching at light load condition causes low efficiency and thermal problem. Therefore, a new power conversion circuit for sustaining power module of 60' PDP is proposed whose ZVS is obtained by additional ZVS tank. This paper presents properties of the proposed converter through mode analysis, numerical analysis. And a 900w prototype for sustaining power module of 60' PDP is produced to verify the analytic results. As an experimental results, ZVS is achieved from full load to 10% load variation and more than 92% of high efficiency is obtained at 10% load condition.

• Journal of Power Electronics
• /
• v.6 no.3
• /
• pp.271-278
• /
• 2006

A new high efficiency zero-voltage and zero-current switching (ZVZCS) bidirectional DC/DC converter is proposed in this paper. The proposed converter consists of two symmetric half-bridge cells as the input and output stages. MOSFETs of input stage are turned-on in ZVS condition, and those of output stage are turned-off in ZCS condition. In addition, MOSFETs of input and output stages have low voltage stresses clamped to input and output voltage, respectively. Therefore, the proposed converter has high efficiency and high power density. The operational principles are analyzed and the advantages of the proposed converter are described. The 300W prototype of the proposed converter is implemented for 42V hybrid electric vehicle (HEV) application in order to verify the operational principles and advantages.

• Journal of Korean Institute of Industrial Engineers
• /
• v.14 no.2
• /
• pp.115-129
• /
• 1988

This paper discusses an analytical method to derive the efficiency and the average storage level of an unreliable two-machine, two-stage automatic transfer line with interstage buffer storage. Extensive numerical experiments and simulations are also conducted to see the behavior of the system under the wide range of parameter values as well as various distributions.

• 연구논문집
• /
• s.25
• /
• pp.77-90
• /
• 1995

For improving performance of heat pump system, researcher has adapted 2-stage economizer cycle and developed a high-efficiency screw compressor, new working medium(non-azeotropic mixed refrigerant) and counterflow heat exchangers operating with a small temperature difference. Target of this study is development of high performance heat pump system with the 2-stage economizer system using the non-azeotropic mixed refrigerant. For the purpose of excuting target, we constucted computer simulation programs, compared and examed various types of cycle and non-azeotropic mixture. Based on the results from computer simulation we selected optimum mixtures and reflected design and production process of performance test equipment with the 1-stage econmizer system. In order to accomplish the final target, design and production of the 2-stage economizer system, we performed pilot test using the 1-stage economizer performance test system and finally design and production of the 2-stage economizer system.

• Korean Journal of Clinical Laboratory Science
• /
• v.53 no.4
• /
• pp.333-341
• /
• 2021

Benzodiazepines (BDZs) drugs act on the GABA_A receptor, function as nerve suppressors, and are used to treat anxiety, insomnia, and panic disorder. We analyzed the data of 30 individuals to determine any differences in the sleep-electroencephalogram findings among individuals varying in age, benzodiazepine use, and duration of benzodiazepine use. Comparisons between users and non-users of benzodiazepines, short-term and long-term users, older and younger users, and older short-term and older long-term users, were achieved using electroencephalographic findings obtained through polysomnography. The parameters evaluated included sleep latency, sleep efficiency, sleep-stage percentages, number of sleep spindles, and average frequency of sleep-spindle. The difference between benzodiazepine users and non-users was significant with respect to sleep-stage percentages and average frequency of sleep-spindle. Older and younger users differed significantly with respect to sleep efficiency and sleep-stage percentages, whereas significant difference for sleep efficiency was obtained between long-term and short-term users. Taken together, our results indicate that BDZ consumption suppresses slow-wave sleep and increases the frequency of sleep spindles.

• Particle and aerosol research
• /
• v.17 no.2
• /
• pp.21-27
• /
• 2021

We developed non-metallic electrodes that can replace metallic electrodes of the electrostatic precipitator(ESP) for the purpose of light weight, corrosion resistance, cost reduction. We manufactured three types of collection electrodes made of stainless steel (M), Carbon ink coating layer-Plastic sheet-Carbon ink coating layer (CPC), and Plastic sheet-Carbon ink coating layer-Plastic sheet (PCP). We studied the collection efficiency of a two-stage ESP using oil mist particles with and without collection stage by changing the flow rate, the material of collection electrode, and the applied voltage of the pre-charger module and the collection module. Here we measured concentrations of particles at diameters of 0.45 ㎛ (CMD; count median diameter) and 3.0 ㎛ (MMD : mass median diameter), as well as PM_2.5 and PM₁₀. As a result of the experiment, two-stage ESP had 22~25% higher collection efficiency in PM_2.5 than one-stage ESP at the same applied voltage. The difference in collection efficiency by varying the materials of collection electrodes was less than 5%. The weight of the non-metallic electrode was only one eighth the weight of the metal electrode. CPC electrode had a thickness of 0.27 mm, which was 1.5 times thinner than a thickness of PCP electrode, so when the flow rate increased, the CPC electrodes couldn't be kept at equal intervals due to the fluttering unlike PCP electrodes. In addition, the PCP-CPC collection module of the present experiment followed the theoretical efficiency based on Deutsch equation and Cochet's charging theory.

• Asian-Australasian Journal of Animal Sciences
• /
• v.5 no.2
• /
• pp.357-363
• /
• 1992

The experiment was carried out to estimate the energy and protein requirements of Khaki Campbell $\times$ Thai Native growing ducks. The growing stage was divided into 2: the first was a starting stage from 0 to 4 weeks of age and the second was a growing stage from 4 to 18 weeks of age. In the starting stage, the birds were given diets containing 2.70, 2.75, 2.80, 2.85 and 2.90 Mcal ME/kg and ME/protein ratio of 150/l for the energy requirement trial, and diets containing 17.0%, 18.5%, 20.0% and 21.5% protein and 2.8 Mcal ME/kg for the protein requirement trial. It was found that there were no significant differences in body weight gain of feed efficiency among the energy or protein levels. In the growing stage, no significant differences in body weight gain or feed efficiency were found among the energy levels from 2.70 to 2.90 Mcal ME, or protein levels from 15.5% to 20.0%. The age at first lay was 105-117 days and this is earlier than that observed in purebred Khaki Campbell ducks. The feed cost for raising ducks was lower in the low energy and low protein diets. In conclusion, Khaki Campbell $\times$ Thai native ducks can be raised with a diet low in ME as 2.7 Mcal/kg during the whole growing period. As for the protein. 7.0% in the starting stage and 15.5% in the growing stage is practical.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.25 no.10
• /
• pp.1281-1292
• /
• 2001

Experiments were done for the comparison of performance and flow characteristics between a two -stage axial flow fan and a counter-rotating axial flow fan. Each stage of the two -stage axial flow fan used fur the present study has an eight bladed rotor and thirteen slater blades. The front and the rear rotor of the counter - rotating axial flow fan have eight blades each and are driven by coaxial counter ro latins shafts through a gearbox located between the rear rotor and the electric motor. Both of the two axial fan configurations have identical rotor blades and the same operating condition fur the one -to-one comparison of the two. Performance curves of the two configurations were obtained and compared by varying the blade pitch angles and axial gaps between the blade rows. The fan characteristic curves were obtained following the Korean Standard Testing Methods for Turbo Fans and Blowers (KS B 6311). The fa n flow characteristics were measured using a five-hole probe by a non-nulling method. The velocity profiles between the hub and tip of the fans were measured and analyzed at the particular operating condition s of peak efficiency, minimum and maximum pressure coefficients. The peak efficiency of the counter-rotating axial fan was improved about 2% respectively, compared with the two stage axial fan. At the minimum pressure coefficient point of the two stage axial fan, the fan inlet flow patterns show that axial velocity highly decreased in the vicinity of the blade tip region. Also, the reverse flow took place at the blade tip.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.10 no.3
• /
• pp.303-314
• /
• 1998

In this study, the performance of a multi-stage condensation heat pump was examined. Computer simulation programs were developed for 1-stage, 2-stage, and 3-stage heat pumps and R11, R123, R141b were tested as working fluids. The results showed that coefficients of performance(COPs) of an optimized 3-stage condensation heat pump are 25∼40% higher than those of a conventional 1-stage heat pump. The increase in COP, however, differed among the fluids tested. The improvement in COP largely stems from the decrease in average LMTD values in the condensers of the multi-stage system. For the 3-stage condensation heat pumps, optimized UA values of three condensers were determined to be 30∼40% of the UA value of the total condenser regardless of the working fluid. When the amount of cooling water entering into the intermediate and high-stage subcoolers is roughly 10% of the total condenser cooling water respectively, the optimum performance was achieved for the 3-stage condensation heat pump.

• Proceedings of the Korean Institute of Interior Design Conference
• /
• 2007.11a
• /
• pp.30-36
• /
• 2007

Recently, many performing arts facilities are under construction to accommodate people's various interest in cultural experiences. However, due to Korea's lack of know-how in such constructions and an absence of proper regulations on design planning, each designer designs and constructs the facilities differently, so several problems are occurring in the process of construction, such as high production cost for stage sets, high labor cost, low efficiency of stage work, and complicated work process. This resulted in low quality production of performance. This study is conducted to address the need for a systematic study on stage floor, and to propose an efficient way of regulating stage work in existing performing arts facilitiesand new facilities to be built. By a comparative analysis of performing arts facilities in Korea, and by analyzing stage floors of the facilities, this research suggests minimum modules as well as an appropriate unit of modules based on the minimum modules; and provides basic data on stage floors, which can be used for remodeling existing facilities orfor planning new cultural facilities. Also, this study suggests various ways of utilizing performing arts facilities in Korea.