• Composites Research
• /
• 제15권4호
• /
• pp.9-16
• /
• 2002

복합재료가 항공기 구조물 및 기계 부품등에 폭 넓게 적용됨에 따라, 복합재료 구조물에서 가장 취약한 복합재료 체결부의 설계는 매우 중요한 연구분야로 대두되고 있다. 본 논문에서는 동일 적층순서를 가지는 복합재료 기계적 체결부의 강도를 예측하기 위하여 파괴면적지수법을 제안하고 복합재료 체결부의 강도를 예측하였다. 제안된 파괴면적지수법에 의하여 기계적 체결구조를 갖는 복합재료의 체결부의 강도를 예측한 결과, 6.03%내에서 체결부의 강도를 예측할 수 있었다.

• 열처리공학회지
• /
• 제9권2호
• /
• pp.112-120
• /
• 1996

The effects of ${\varepsilon}$ martensite content and strain amplitude on damping capacity of an Fe-17%Mn alloy have been studied to establish damping mechanism of Fe-Mn system corresponding to the magnitude of strain amplitude. In a range of $1{\times}10^{-4}{\sim}3{\times}10^{-4}$ strain amplitude, the damping capacity is linearly proportional to the ${\varepsilon}$ martensite content, which suggests that stacking faults and ${\varepsilon}$ martensite variant boundaries are the principal damping sources. In the range of $4{\times}10^{-4}{\sim}6{\times}10^{-4}$ strain amplitude, however, a maximum damping capacity is observed around 68 vol.% ${\varepsilon}$. This behavior is very similar to dependence of relative area of ${\gamma}/{\varepsilon}$ interface on ${\varepsilon}$ martensite content. This means that in this strain range, ${\gamma}/{\varepsilon}$ interface acts as damping source in addition to the stacking faults and variant boundaries in Fe-17%Mn alloy.

• Bulletin of the Korean Chemical Society
• /
• 제30권2호
• /
• pp.449-453
• /
• 2009

A mesoporous assembly of layered titanate with well-dispersed Pt cocatalysts has been synthesized via a restacking of exfoliated titanate nanosheets and a simultaneous adsorption of Pt nanoparticles. According to powder X-ray diffraction analysis, the obtained mesoporous assembly shows amorphous structure corresponding to the disordered stacking of layered titanate crystallites. Field emission-scanning electron microscopy and $N_2$ adsorption-desorption isotherm measurement clearly demonstrate the formation of mesoporous structure with expanded surface area due to the house-of-cards type stacking of the titanate crystallites. From high resolution-transmission electron microscopy and elemental mapping analyses, it is found that Pt nanoparticles with the size of ~2.5 nm are homogeneously dispersed in the mesoporous assembly of layered titanate. In comparison with the protonated titanate, the present mesoporous assembly of layered titanate exhibits better photocatalytic activity for the photodegradation of organic molecules. This finding underscores that the restacking of exfoliated nanosheets is quite useful not only in creating mesoporous structure but also in improving the photocatalytic activity of titanium oxide.

• 한국염색가공학회지
• /
• 제31권2호
• /
• pp.65-76
• /
• 2019

A multi-point touch input sensor having different sizes or different capacitance touch points connected by only one pair of signal transmission lines was fabricated using a polyimide film coated with a thin copper plate. The capacitance increases with the decrease in the number of sheets of fabric spacers placed between the two sheets of the polyimide film. Therefore, the touch input sensor could be manufactured without fabric spacers, which was possible by the action of the polyimide film as a dielectric material in the capacitor. On the multi-point touch sensor, higher capacitance was obtained when pressing wider-area touch points with 10mm to 25mm diameter on average. However, the capacitance of a system comprising two sheets of touch sensors was considerably low, causing a serious overlap of the capacitance values according to the data collected from the reliability test. Although the capacitance values could be increased by stacking several sheets of touch sensors, the overlap of data was still observed. After reducing the size of all touch points to 10mm and stacking up to eight sheets of sensors, reliable and consistent capacitance data was obtained. Five different capacitance signals could be induced in the sensors by pushing touch points simultaneously.

• International Journal of Automotive Technology
• /
• 제4권4호
• /
• pp.203-211
• /
• 2003

This paper describes a method for a falling weight impact test to estimate the impact energy absorbing characteristics and impact strength of CFRP (Carbon-fiber reinforced plastics) laminate plates based on considerations of stress wave propagation theory, which were converted to measurements of load and displacement verses time. The delamination area of impacted specimens for the different ply orientations was measured with an ultrasonic C-scanner to determine the correlation between impact energy and delamination area. The energy absorbed by a quasi-isotropic specimen having four interfaces was higher than that of orthotropic laminates with two interfaces. The more interfaces, the greater the energy absorbed. The absorbed energy of a hybrid specimen embedding GFRP (Glass-fiber reinforced plastics) layer was higher than that of normal specimens. Also, a falling weight impact tester was built to evaluate the characteristics and impact strength of CFRPs.

• 한국조경학회지
• /
• 제30권1호
• /
• pp.1-10
• /
• 2002

The purpose of this article is to examine land use change in the fringe area of a metropolitan city through multi-temporal data analysis. Change detection has been regarded as one of the most important applications for utilization of remotely sensed imageries. Conventionally, two images were used for change detection, and Arithmetic calculators were generally used on the process. Meanwhile, multi-temporal change detection for a large number of images has been carried out. In this paper, a digital land-use map and three Landsat TM data were utilized for the multi-temporal change detection Each urban area map was extracted as a base map on the process of multi-temporal change detection. Each urban area map was converted to bit image by using boolean logic. Various urban change types could be obtained by stacking the urban area maps derived from the multi-temporal data using Geographic Information System(GIS). Urban change type map was created by using the process of piling up the bit images. Then the urban change type map was compared with each land cover map for the change detection. Dalseo-gu of Daegu city and Hwawon-eup of Dalsung-gun, the fringe area of Daegu Metropolitan city, were selected for the test area of this multi-temporal change detection method. The districts are adjacent to each other. Dalseo-gu has been developed for 30 yeais and so a large area of paddy land has been changed into a built-up area. Hwawon-eup, near by Dalseo-gu, has been influenced by the urbanization of Dalseo-gu. From 1972 to 1999, 3,507.9ha of agricultural area has been changed into other land uses, while 72.7ha of forest area has been altered. This agricultural area was designated as a 'Semi-agricultural area'by the National landuse Management Law. And it was easy for the preserved area to be changed into a built-up area once it would be included as urban area. Finally, the method of treatment and management of the preserved area needs to be changed to prevent the destruction of paddy land by urban sprawl on the urban fringe.

• 한국항공우주학회지
• /
• 제32권9호
• /
• pp.49-56
• /
• 2004

복합재료가 항공기 구조물 및 기계부품 등에 폭 넓게 적용됨에 따라, 복합재료 구조물에서 가장 취약한 복합재료 체결부의 설계는 매우 중요한 연구분야로 대두되고 있다. 본 논문에서는 복합재료의 기계적 체결부를 마찰이 없는 강체 핀으로 단순화한 선형 유한요소해석을 수행하여 파괴면적지수법으로 복합재료 체결부의 강도를 예측하였다. 파괴면적 지수법을 이용하여 형상, 원공의 크기 및 적층순서가 다른 기계적 체결구조를 갖는 복합 재료의 체결부의 강도를 예측한 결과, 12.2% 내에서 체결부의 강도를 예측할 수 있었다.

• The Plant Pathology Journal
• /
• 제40권3호
• /
• pp.329-335
• /
• 2024

Phytophthora root and stem rot (PRR), caused by Phytophthora sojae, can occur at any growth stage under poorly drained and humid conditions. The expansion of soybean cultivation in South Korean paddy fields has increased the frequency of PRR outbreaks. This study aimed to identify four P. sojae isolates newly collected from domestic fields and evaluate race-specific resistance using the hypocotyl inoculation technique. The four isolates exhibited various pathotypes, with GJ3053 exhibiting the highest virulence complexity. Two isolates, GJ3053 and AD3617, were screened from 205 soybeans, and 182 and 190 genotypes (88.8 and 92.7%, respectively) were susceptible to each isolate. Among these accessions, five genotypes resistant to both isolates were selected. These promising genotypes are candidates for the development of resistant soybean cultivars that can effectively control PRR through gene stacking.

• Composites Research
• /
• 제16권5호
• /
• pp.1-6
• /
• 2003

복합재료의 사용이 일반화되면서 복합재료 구조물의 효율성은 복합재료 구조자체 보다는 복합재료 체결부에 의해서 결정되기 때문에 복합재료 체결부의 설계는 매우 중요한 연구분야가 되고 있다. 본 논문에서는 체결부의 형상변화 및 적층순서의 변화에 따른 파손하중을 파괴면적지수법에 의한 수치적인 예측과 실험치를 비교하여 파괴면적지수법의 유용성을 검토하였다. 연구되어진 II cases에 대해서 파괴면적지수법에 의한 예측하중은 측정된 파손하중과 최대 9.96%내의 오차를 가짐을 볼 수 있었다.

• 한국결정성장학회지
• /
• 제24권4호
• /
• pp.145-150
• /
• 2014

3차원적 선택적 결정 성장 방법에 의해 GaN stripe 구조의 꼭지점 부분에만 GaN 나노로드를 성장하였다. GaN stripe의 꼭지점 부분의 $SiO_2$ 만을 최적화된 포토리소그라피 공정을 이용하여 제거하고 이를 선택적 결정 성장을 위한 마스크로 사용하였다. $SiO_2$가 제거된 꼭지점 부근에만 Au 금속을 증착하고, metal organic vapor phase epitaxy(MOVPE) 방법에 의해 GaN stripe의 꼭지점 부분에만 GaN 나노로드의 선택적 성장을 실시하였다. GaN 나노로드의 형상과 크기는 결정 성장 온도와 III족 원료의 공급량에 의해 변화가 있음을 확인하였다. Stripe 꼭지점에 성장된 GaN 나노로드는 단면이 삼각형형태를 가지고 있으며 끝으로 갈수록 점점 폭이 좁아지는 테이퍼 형상을 가지며 성장되었다. TEM 관측 결과, 매우 좁은 영역에서만 선택적 결정 성장이 이루어졌기 때문에 GaN 나노로드에서 관통전위(threading dislocations)는 거의 관찰되지 않음을 확인하였다. 선택성장이 시작되는 부분의 결정면과 GaN 나노로드의 성장방향의 결정면 방향의 차이에 기인하는 적층결함(stacking faults)들이 GaN 나노로드의 중심영역에서 생성되는 것을 관찰할 수 있었다.