• 한국전기전자재료학회논문지
• /
• 제26권11호
• /
• pp.821-825
• /
• 2013

Effect of multi-stacked layer (MSL), 0.1 mol (M) and 0.3 mol (M) hafnium oxide ($HfO_2$) alignment layers were fabricated via a solution-process for LCs orientation. The solutions were spin-coated and annealed in a furnace. MSL consists of three sub-layers using 0.1 M solution, mono-layer (ML) is composed of 0.3 M $HfO_2$ solution. Then ion-beam irradiation was treated with 1.8 keV for 2 min. $HfO_2$-based LC cells were investigated through photographs, pre-tilt angle using crystal rotation method, X-ray photoelectron spectroscopy (XPS) measurement, and surface roughness using atomic force microscopy(AFM) for their characteristic research. Good LC orientation characteristics were observed on MSL $HfO_2$ surface. The LC alignment mechanism on MSL $HfO_2$ and ML $HfO_2$ surfaces was attributed to van der Waals (VDW) interaction between the LC molecular and substrate surface.

• ETRI Journal
• /
• 제41권3호
• /
• pp.396-407
• /
• 2019

Laser-assisted bonding (LAB) is an advanced technology in which a homogenized laser beam is selectively applied to a chip. Previous researches have demonstrated the feasibility of using a single-tier LAB process for 3D through-silicon via (TSV) integration with nonconductive paste (NCP), where each TSV die is bonded one at a time. A collective LAB process, where several TSV dies can be stacked simultaneously, is developed to improve the productivity while maintaining the reliability of the solder joints. A single-tier LAB process for 3D TSV integration with NCP is introduced for two different values of laser power, namely 100 W and 150 W. For the 100 W case, a maximum of three dies can be collectively stacked, whereas for the 150 W case, a total of six tiers can be simultaneously bonded. For the 100 W case, the intermetallic compound microstructure is a typical Cu-Sn phase system, whereas for the 150 W case, it is asymmetrical owing to a thermogradient across the solder joint. The collective LAB process can be realized through proper design of the bonding parameters such as laser power, time, and number of stacked dies.

• 한국진공학회지
• /
• 제4권S1호
• /
• pp.138-144
• /
• 1995

It is commonly believed that high permittivity materials will be necessary for future high density Gbit DRAMs. In a first part, we explain the choice of SrTiO3 by ECR MOCVD for Gbit-scale DRAMs. In a second part, after describing the ECR MOCVD system and presenting the requirements SrTiO3 thin films should meet for use in Gbit-scale DRAMs, the physical and electrical properties of srTiO3 thi film prepared by ECR MOCVD are then studied. A stacked capacitor technology, suitable for use in 1 Gbit DRAM, and comprising high permittivity SrTiO3 thin films prepared by ECR MOCVD at $450^{\circ}C$ on electron beam and RIE patterned RuO2/TiN storage nodes is finally described.

• 한국전자파학회:학술대회논문집
• /
• 한국전자파학회 2002년도 종합학술발표회 논문집 Vol.12 No.1
• /
• pp.293-296
• /
• 2002

In this paper, we proposed a beam tilting microstrip patch array antenna for the reception of satellite signals by using low cost copper etched polyester films and foams. The configuration and coupling mechanism of the proposed antenna are similar to the dipole Yagi-Uda antenna. It is composed of 3 layers of polyester films and three layers of foam. In order to prevent unwanted radiation and coupling loss by microstrip feeding networks and parasitic patches, a stacked layer with rectangular slots above the driver patch array is inserted. The 16${\times}$8 element microstrip Patch way antenna is Presented by experimental results. Its beam patterns are affected by many parameters such as sizes of the patches, gap between the patches. characteristics of the substrates, feeding method, etc. Owing to its complexities of various design parameters, both simulation and experiment were performed. The fabricated antenna received DBS signal from KOREASAT 3 by doing nothing but adjusting azimuth direction.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2004년도 춘계학술대회논문집
• /
• pp.906-911
• /
• 2004

In the development of sheet-handling machinery, it is important to be able to predict the italic and dynamic behavior of the sheets with a high degree of reliability because the sheets are fed and stacked at such a high speed. In this paper, a spring-mass-beam model is introduced. This model consists of rotational springs, shear springs and masses. The formulations for static and dynamic behavior of sheets are introduced. And some simulations are presented for static and dynamic cases.

• Journal of the Optical Society of Korea
• /
• 제16권4호
• /
• pp.331-335
• /
• 2012

A miniaturized laser beam transmitter, in which a visible laser module at ${\lambda}$=650 nm is precisely stacked upon an infrared (IR) module at ${\lambda}$=905 nm, has been proposed and constructed to provide an IR collimated beam in conjunction with a collinear monitoring visible beam. In particular, the IR beam is selectively dispersed through a perforated sheet diffuser, so as to create a rapidly diverging close-range beam in addition to a highly defined long-range beam simultaneously. The complementary close-range beam plays a role in mitigating the blind region in the vicinity of the transmitter, which is inevitably missed by the main long-range beam, thereby uniformly extending the transmitter's effective trajectory that is sensed by a receiver. The proposed transmitter was designed through numerical simulations and then fabricated by incorporating a diffuser sheet, perforated with an aperture of 2 mm. For the manufactured transmitter, the IR long-range beam was observed to have divergences of ~2.3 and 1.6 mrad in the fast and slow axes, respectively, while the short-range beam yielded a divergence of ~24 mrad. The angular alignment between the long-range IR and visible beams was as accurate as ~0.5 mrad. According to an outdoor feasibility test involving a receiver, the combination of the IR long- and short-range beams was proven to achieve a nearly uniform trajectory over a distance ranging up to ~600 m, with an average detectable cross-section of ${\sim}60{\times}80cm^2$.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2005년도 춘계학술대회논문집
• /
• pp.326-329
• /
• 2005

In the development of sheet-handling .machinery, it is important to predict the static and dynamic behavior of the sheets with a high degree of reliability because the sheets are fed and stacked at suck a high speed flexible media behaves geometric nonlinearity of large displacement and small strain. In this paper, static analysis of flexible media are performed by FEM considering geometric nonlinearity. Linear stiffness matrix and geometric nonlinear stiffness matrix based m the updated Lagrangian approach are derived using $C^1$ beam element and numerical simulations are performed by Updated Newton-Raphson(UNR) method.

• Journal of Electrical Engineering and Technology
• /
• 제8권4호
• /
• pp.856-862
• /
• 2013

A cavity-backed two-arm spiral antenna for partial discharge diagnosis is presented. The proposed antenna consists of a two-arm Archimedean spiral, a tapered microstrip balun as spiral antenna feed, and a ring-shaped absorber-loaded cavity. The Archimedean spiral antenna is designed for the operating frequency band of 0.3 GHz to 1.5 GHz and fed by the tapered microstrip balun. The cavity is utilized to transform the bidirectional beam into a unidirectional beam, thereby enhancing gain. The ring-shaped absorber is stacked in the cavity to reduce the reflected waves from the cavity wall. The proposed antenna is designed and simulated using CST Microwave Studio. A prototype of the proposed antenna is likewise fabricated and tested. The measured radiation patterns are directional to the positive z-axis, and the measured peak gain is 8.13 dBi at a frequency of 1.1 GHz.

• 마이크로전자및패키징학회지
• /
• 제7권1호
• /
• pp.25-28
• /
• 2000

분자선에피택시법에 의하여 GaAs(100)기판 위에 InAs 자발형성양자점을 성장하였다. InAs 양자점은 1, 3, 6, 10, 15 및 20층 등으로 다양하게 적층되어졌고, GaAs 층과 InAs 양자점 층은 각각 20 MLs와 2 MLs의 두께를 갖도록 하였다. 이 양자점의 나노구조적 특성은 PL과 STEM을 사용하여 분석하였다. 가장 높은 PL 강도는 6층의 적층구조를 갖는 시편에서 나타났고 PL 피크의 에너지가 적층회수가 증가함에 따라 분리됨을 알 수 있었다. STEM분석결과, 6충의 적층구조에서는 결함이 거의 없이 수직으로 형성된 구조를 보여준 반면에 10층 이상의 적층구조를 가질 때 그 성장 방향에 따라 volcano형상을 갖는 결함이 수직하게 성장되어졌다.

• 한국전자파학회논문지
• /
• 제29권12호
• /
• pp.915-923
• /
• 2018

본 논문은 ISM 대역인 902~928 MHz에서 건물의 내구성을 진단하기 위한 콘크리트 매립형 안테나 설계에 관하여 서술한다. 이에 안테나가 매립되는 환경에서도 콘크리트 매질 특성에 의해 임피던스 변화가 크지 않는 이중 슬롯 패치 안테나를 제안하였다. 함수율에 따라 변하는 콘크리트 매질에 의한 성능 열화를 최소화하기 위해 제안하는 안테나는 기생 패치를 이용하여 대역폭을 확장하였다. 제작된 안테나는 전 대역에서 VSWR 2 : 1 이하 특성을 만족하며, 빔 폭은 80도 정도이며, 7 dBi 이상을 만족하는 이득을 가진다. 제안한 안테나는 직사각형 콘크리트 블록에 장착하여 측정하였으며, 모의실험과 실제 측정을 통해 함수율 변화에 따른 반사손실 및 이득을 확인하였다.