• JSTS:Journal of Semiconductor Technology and Science
• /
• v.12 no.4
• /
• pp.458-466
• /
• 2012

A Dual metal gate stack cylindrical/ surrounded gate MOSFET (DMGSA CGT/SGT MOSFET) has been proposed and an analytical model has been developed to examine the impact of this structure in suppressing short channel effects and in enhancing the device performance. It is demonstrated that incorporation of gate stack along with dual metal gate architecture results in improvement in short channel immunity. It is also examined that for DMGSA CGT/SGT the minimum surface potential in the channel reduces, resulting increase in electron velocity and thereby improving the carrier transport efficiency. Furthermore, the device has been analyzed at different bias point for both single material gate stack architecture (SMGSA) and dual material gate stack architecture (DMGSA) and found that DMGSA has superior characteristics as compared to SMGSA devices. The analytical results obtained from the proposed model agree well with the simulated results obtained from 3D ATLAS Device simulator.

• Progress in Superconductivity
• /
• v.9 no.1
• /
• pp.18-22
• /
• 2007

For interlayer tunneling spectroscopy using a small stack of $Bi_2Sr_2CaCu_2O_{8+x}$ (Bi-2212) intrinsic junctions in a high-bias range, large self-heating takes place due to the poor thermal conductivity of Bi-2212. In this study, we numerically estimate the self-heating around a Bi-2212 sample stack for I-V or dI/dV-V measurements. Our results show that the temperature discrepancy between the Bi-2212 sample stack and top Au electrodes due to bias-induced self-heating is small enough along the c-axis direction of Bi-2212. On the other hand, the lateral temperature discrepancy between the sample stack and the Bi-2212 on-chip thermometer stack can be as large as ${\sim}20\;K$ for the highest bias required to observe the pseudogap hump structure. We thus suggest a new in-situ ac thermometry, employing the Au current-bias electrode itself deposited on top of the sample stack as the resistive thermometer layer, which is supposed to allow safe temperature measurements for the interlayer tunneling spectroscopy.

• Journal of the Korean Solar Energy Society
• /
• v.33 no.4
• /
• pp.8-14
• /
• 2013

The conversion of solar energy into acoustic waves is experimentally studied. Measurements were made on the Sound Pressure Level(SPL), onset time and the temperature gradient across the stack, with the Cell Per Square Inch(CPSI) of stack changed. A pyrex resonance tube is used with a honey-comb structure ceramic stack along with Ni-Cr and Cu wires. An AL1 acoustical analyzer was used to measure the SPL and frequency of acoustic waves whereas K-type thermocouples were hired to estimate temperature gradients. As a result, when the supply electric power was 25W, maximum SPLs of 104.1 dB, 109.4 dB and 112.8 dB were detected for the stacks of 200, 300 and 400 CPSI and their respective stack positions of 70mm, 60mm and 50mm from the closed end.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.42 no.5 s.335
• /
• pp.5-12
• /
• 2005

Establishment of bandwidth and effective traffic processing are required to treat various traffics according to a rapid increase in Internet traffic. A wavelength based transferring method was introduced to support a broadband bandwidth according to this requirement, and consequently, a label processing procedure has been investigated to treat various traffics. This paper introduces a regular shape of stack structure in order to solve the present MPLS label stack processing unit, and analyzes the relationship to label merging, which is initiated between label merging inside and outside the LSP tunnel. By applying an adaptive label structure and merging point a hierarchical label, which is aroused in the GMPLS, can be uniformly simplified and improved from the perspective of cost and processing time at a node

• Proceedings of the International Microelectronics And Packaging Society Conference
• /
• 2002.11a
• /
• pp.115-121
• /
• 2002

In this research we have investigated the characteristics of ultra thin $HfO_2 /SiON$stack structure films using several analytical techniques. SiON layer was thermally grown on standard SCI cleaned silicon wafer at $825^{\circ}C$ for 12sec under $N_2$O ambient. $HfO_2 /SiON$$_4$/$H_2O$ as precursors and $N_2$as a carrier/purge gas. Solid HfCl$_4$was volatilized in a canister kept at $200^{\circ}C$ and carried into the reaction chamber with pure $N_2$carrier gas. $H_2O$ canister was kept at $12^{\circ}C$ and carrier gas was not used. The films were grown on 8-inch (100) p-type Silicon wafer at the $300^{\circ}C$ temperature after standard SCI cleaning, Spectroscopic ellipsometer and TEM were used to investigate the initial growth mechanism, microstructure and thickness. The electrical properties of the film were measured and compared with the physical/chemical properties. The effects of heat treatment was discussed.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2013.08a
• /
• pp.245.1-245.1
• /
• 2013

Polydiphenylacetylene (PDPA) derivatives are a class of conjugated polymer that contain intramolecular excimer emission originating the intramolecular stack structure. In contrast with conventional conjugated polymer, the fluorescence property of PDPA significantly depends on the intramolecular stack structure. In this regard, herein, we investigated new fluorescence switching mechanism of conjugated polyelectrolyte (CPE) based on PDPA. The developed CPE showed relatively weak fluorescence emission in water, while the polymer exhibited a great fluorescence amplification behavior by electrostatic complex with proteins. In addition, the CPE is highly sensitive to binding with a little protein despite of turn-on type fluorescence response. We found that the fluorescence switching of the CPE closely relate to a perturbation of the intramolecular stack structure. The new fluorescence switching mechanism of the CPE is very useful for protein assays and discrimination and it also would be provide new sensing approaches as basic sensing mechanism.

• Journal of IKEEE
• /
• v.25 no.1
• /
• pp.133-138
• /
• 2021

We propose a Ku-band three-stack CMOS power amplifier to enhance the output power and efficiency. To minimize the dc power consumption, the driver stage is designed using common-source structure. To obtain high output power and utilize a voltage combining method, the power stage is designed using stack structure. To verify the proposed power amplifier structure, we design a Ku-band power amplifier using 65-nm RFCMOS process which provide nine metal layers. The P1dB, power-added efficiency, and gain are higher than 20 dBm, 23 dB, and 25%, respectively, while the operating frequency is 14 GHz-16 GHz.

• Tunnel and Underground Space
• /
• v.31 no.3
• /
• pp.198-209
• /
• 2021

Recently, the demand for demolition of unnecessary steel shell structure is increasing due to deterioration and unsatisfactory functional conditions and the issue of demolition is becoming a major highlight. This execution case was intended to describe an application of the felling method, a explosive demolition method to demolish steel shell structures, for the demolition of a steel stack and steel head tank. As a result of the explosive demolition, the steel stack and steel head tank had collapsed precisely according to the estimated direction. And the explosive demolition was completed without causing any damage to surrounding facilities.

• Design & Manufacturing
• /
• v.8 no.2
• /
• pp.50-55
• /
• 2014

Recently, semi-stack mold have been developed for satisfying the various elements required in the mold industry. The mold is possible using with general-purpose injection molding machine by weight reduction through the improvement of the mold structure. In order to do that, tension core, spiral cooling system and half runner system were applied. It is effective for increased productivity and decreased of loss to the materials. However, the mold is required the filling balance in order to improve the quality and efficiency. Thus this study performed that optimum design and analysis of semi-stack mold for filling balance.

• Transactions of the Korean hydrogen and new energy society
• /
• v.25 no.3
• /
• pp.271-279
• /
• 2014

A 25kW-class polymer electrolyte membrane (PEM) fuel cell system has been developed for the propulsion of a leisure boat. The fuel cell system was designed to satisfy various performance requirements, such as resistance to shock, stability under rolling and pitching oscillations, and durability under salinity condition, for its marine applications. Then, the major components including a 30kW-class PEM fuel cell stack, a DC-DC converter, a seawater cooling system, secondary battery packs, and balance of plants were developed for the fuel cell system. The PEM fuel cell stack employs a unique design structure called an anodic cascade-type stack design in which the anodic cells are divided into several blocks to maximize the fuel utilization without hydrogen recirculation devices. The performance evaluation results showed that the stack generated a maximum power of 31.0kW while maintaining a higher fuel utilization of 99.5% and an electrical efficiency of 56.1%. Combining the 30-kW stack with other components, the 25kW-class fuel cell system boat was fabricated for a leisure. As a result of testing, the fuel cell system reached an electrical efficiency of 48.0% at the maximum power of 25.6kW with stable operability. In the near future, two PEM fuel cell systems will be installed in a 20-m long leisure boat to supply electrical power up to 50kW for propelling the boat and for powering the auxiliary equipments.