• 한국산학기술학회논문지
• /
• 제16권10호
• /
• pp.6977-6984
• /
• 2015

품질 향상을 위해 연속적인 소성 변형을 이용한 롤 포밍 공정에 피어싱, 벤딩, 트리밍 등 별도의 가공공정을 통합한 볼 슬라이드 레일의 멀티 롤 포밍 공정의 필요성이 대두되고 있다. 하지만 프레스기의 진동 및 소음은 이 공정에서 생산되는 슬라이드 레일의 품질 저하를 유발한다. 본 연구에서는 롤 포밍 유한요소 프로그램으로 최적 변형률을 고려하여 롤을 설계하였다. 그리고 멀티 공정의 정적 안정성을 예측하기 위해 구조해석 프로그램으로 프레스기에 대한 응력 및 변형량을 계산하였다. 또한 공진영역에서의 장치들의 운전을 회피하기 위해 Modal 해석을 통해 1, 2차 모드에서의 고유진동수를 계산하였다. 그 결과 공정의 동적 안정성 개선을 확인하기 위해 마이크로폰과 가속도계를 이용하여 기존 및 연구 공정들의 소음, 진동의 크기를 비교하였다. 그리고 기존 및 연구 공정으로 생산되어진 레일의 폭 치수와 표면거칠기를 측정하였다. 따라서 해석 및 실험적 연구를 통해 멀티 롤 포밍 공정이 안정하다는 것을 알 수 있었다.

• 한국미생물생명공학회:학술대회논문집
• /
• 한국미생물생명공학회 2001년도 Proceedings of 2001 International Symposium
• /
• pp.149-153
• /
• 2001

To investigate the mode of bactericidal action for antimicrobial peptide, pediocin, synthetic and mutant pediocins were prepared by direct chemical synthesis. Native pediocin was purified from Pedio-coccus acidilactici M and its conformational structure and bactericidal functions were analyzed and compared to synthetic pediocin. Schematic mode of pediocin actions, how pediocin binds on the target cell membrane, penetrates and makes tunnel are proposed. For these purposes, primary and secondary structures of pediocin was analyzed and disulfide bond assignment was also done. The pediocin purified from P. acidilactici M had high effective bactericidal ability against gram positive bacteria, especially Listeria monocytogenes and was very stable at extreme pHs and even at high temperatures such as autoclaving temperature (121$^{\circ}C$). Pediocin was consisted of 44 amino acids with four cysteines. Novel synthetic peptides were achieved by solid phase peptide synthesis(SPPS) method. To explain the function of cysteine in C-terminal region, mutant pediocin, Ped[C24A＋C44A], was synthesized and their structural and biological functions were analyzed. Second mutant pediocin, Ped[KllE], was prepared to explain the function of lysine at 11 of N-terminal part of pediocin, especially loop of $\beta$-sheet, and to predict the initial binding site of pediocin. The native and synthetic pediocins was showed random coil conformation by spectropolarimetry in moderate conditions. This conformation was observed in extreme conditions such as high temperature and low and high pHs, also. Circular dichroism(CD) data also showed the existence of $\beta$-turn structure in N-terminal part both native and synthetic pediocins. A structural model for pediocin predicts that 18 amino acids in the N-terminal part of the peptide assume a three-strand $\beta$-sheet conformation. This random coil in C-terminal part of pediocin was converted to folding structure, helix structure, in nonpolar solvents such as alcohol and TFE. The disulfide bond between $^{9}$ Cys and $^{14}$ Cys was concrete and inevitable, however, evidences of disulfide bond between $^{24}$ Cys and $^{44}$ Cys was not. Data of Ped[C24A＋C44A], pediocin mutant showed that $^{44}$ Cys was required during killing the target cells but not inevitable, since Ped[C24A＋C44A] still have bactericidal activity but much less than native pediocin. Another pediocin mutant, Ped[KllE], had still bactericidal activity, was controversial to propose that positive charge like as $^{11}$ Lys in loop or hinge in bacteriocin bound or helped to binding to microorganism with electrostatic interaction between cell membrane especially teichoic acid and positive amino acid nonspecifically. The conformation of pediocin among native, synthetic and mutant pediocins did not show big difference. The conformations between oxidized and reduced pediocin were almost similar regardless of native or synthetic.

• 한국컴퓨터산업학회논문지
• /
• 제8권2호
• /
• pp.107-112
• /
• 2007

피부과용 레이저 파장은 아주 얇은층의 조직두께에서 물의 흡수가 거의 90%이상 일어나는데 병소의 표피나 조직은 거의 물로 구성되어 흡수로 인해 증발효과를 가질 수가 있다. 표피를 절개, 층별로 증발 시킬 수 있으며 조직의 정확한 절개가 가능하다. 혈관이나 림프시스템에도 봉합수술이 가능하고 수술부위가 건조하고 눈으로 볼수 있고 무출혈 수술이 가능하다. 특히, 펄스에 대한 튜브양단 출력의 안정이 매우 중요함으로, 본 연구에서는 고주파 방식의 전력변환 장치를 사용하여 부피를 줄이고 의료용 레이저의 전류파형을 쉽게 제어할 수 있어 다양한 치료 효과를 낼 수 있다. ZVS(Zero Voltage Switching)나 ZVZCS(Zero Voltage and Zero Current Switching)를 도입하면 스위칭 손실을 줄일 수 있어 더욱 유리하다. 제안된 의료용 레이저의 전력부에는 1차측 도움에 의한 ZVZCS기법을 도입하여 넓은 부하 범위에서 안정된 soft-switching을 할 수가 있고 제어부는 microcontroller를 구성하여 출력전류 파형을 사용자가 임의의 형태를 갖도록 하였다. 설계 및 제작하여 실험한 결과, 기존장비에 비해 20%의 향상된 결과를 가져왔고, 추후 시스템적으로 보완을 하면 우수한 결과가 될 것으로 사려된다.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 1998년도 제14회 학술발표회 논문개요집
• /
• pp.120-120
• /
• 1998

Boron nitride (BN) films have attracted a growing interest for a variety of t technological applications due to their excellent characteristics, namely hardness, c chemical inertness, and dielectrical behavior, etc. There are two crystalline phases 1551; of BN that are analogous to phases of carbon. Hexagonal boron nitride (h-BN) has a a layered s$\sigma$ucture which is spz-bonded structure similar to that of graphite, and is t the stable ordered phase at ambient conditions. Cubic boron nitride (c-BN) has a z zinc blende structure with sp3-bonding like as diamond, 따ld is the metastable phase a at ambient conditions. Among of their prototypes, especially 삼Ie c-BN is an i interesting material because it has almost the same hardness and thermal c conductivity as di없nond. C Conventionally, significant progress has been made in the experimental t techniques for synthesizing BN films using various of the physical vapor deposition 밍ld chemical vapor deposition. But, the major disadvantage of c-BN films is that t they are much more difficult to synthesize than h-BN films due to its narrow s stability phase region, high compression stress, and problem of nitrogen source c control. Recent studies of the metalorganic chemical vapor deposition (MOCVD) of I III - V compound have established that a molecular level understanding of the d deposition process is mandatory in controlling the selectivity parameters. This led t to the concept of using a single source organometallic precursor, having the c constituent elements in stoichiometric ratio, for MOCVD growth of 삼Ie required b binary compound. I In this study, therefore, we have been carried out the growth of h-BN thin f films on silicon substrates using a single source precursors. Polycrystalline h-BN t thin films were deposited on silicon in the temperature range of $\alpha$)() - 900 $^{\circ}$C from t the organometallic precursors of Boron-Triethylamine complex, (CZHs)3N:BRJ, and T Tris(dimethylamino)Borane, [CH3}zNhB, by supersonic molecular jet and remote p plasma assisted MOCVD. Hydrogen was used as carrier gas, and additional nitrogen w was supplied by either aDlIDonia through a nozzle, or nitrogen via a remote plasma. T The as-grown films were characterized by Fourier transform infrared spectroscopy, x x-ray pthotoelectron spectroscopy, Auger electron spectroscopy, x-ray diffraction, t transmission electron diffraction, optical transmission, and atomic force microscopy.roscopy.

• 대한핵의학회지
• /
• 제25권1호
• /
• pp.37-45
• /
• 1991

Infarct size is a major determinant of prognosis after acute myocardial infarction. Up to date, however, clinically available tests to estimate this size have not been sufficiently accurate. Twelve lead electrocardiogram and wall motion abnormality measurement are not quantitative, and creatine phophokinase (CPK) measurement is inaccurate in the presence of reperfusion or right ventricular infarction. Methods have been developed to localize and size acute myocardial infarcts with agents that are selectively sequestered in areas of myocardial damage, but previously used agents have lacked sufficient specificity. Antibodies that bind specifically only to damaged myocardial cells may resolve this problem and provide an accurate method for noninvasively measuring infarct size. We determined the accuracy with which infarcted myocardial mass can be measured using single photon emission computed tomography (SPECT) and radiolabeled antimyosin antibodies. Seven patients with acute myocardial infarction and one stable angina patient were injected with 2 mCi of Indium-111 labeled antimyosin antibodies. Planar image and SPECT was performed 24 hours later. None of the patients had history of prior infarcts, and none had undergone reperfusion techniques prior to the study, which was done within 4 days of the attack. Planar image showed all infarct patients to have postive uptakes in the cardiac region. The location of this uptake correlated to the infarct site as indicated by electrocardiography in most of the cases. The angina patient, however, showed no such abnormal uptake. Infarct size was determined from transverse slices of the SPECT image using a 45% threshold value obtained from a phantom study. Measured infarct size ranged from 40 to 192 gr. There was significant correlation between the infarct size measured by SPECT and that estimated from serial measurements of CPK (r=0.73, p<0.05). These date suggest that acute myocardial infarct size can be accurately measured from SPECT Indium-111 antimyosin imaging. This method may be especially valuable in situations where other methods are unreliable, such as early reperfusion technique, right ventricular infarct or presence of prior infarcts.

• 대한두경부종양학회지
• /
• 제33권1호
• /
• pp.21-29
• /
• 2017

Methylation of CpG islands in the promoter region of genes acts as a significant mechanism of epigenetic gene silencing in head and neck squamous cell carcinoma (HNSCC). DNA methylation markers are particularly advantageous because DNA methylation is an early event in tumorigenesis, and the epigenetic modification, 5-methylcytosine, is a stable mark. In the present study, we assessed the genome-wide preliminary screening and were to identify novel methylation biomarker candidate in HNSCC. Genome-wide methylation analysis was performed on 10 HNSCC tumors using the Methylated DNA Isolation Assay (MeDIA) CpG island microarray. Validation was done using immunohistochemistry using tissue microarray of 135 independent HNSCC tumors. In addition, in vitro proliferation, migration/invasion assays, RT-PCR and immunoblotting were performed to elucidate molecular regulating mechanisms. Our preliminary validation using CpG microarray data set, immunohisto-chemistry for HNSCC tumor tissues and in vitro functional assays revealed that methylation of the Homeobox B5 (HOXB5) and H6 Family Homeobox 2 (HMX2) could be possible novel methylation biomarkers in HNSCC.

• 대한원격탐사학회지
• /
• 제31권2호
• /
• pp.101-110
• /
• 2015

레이더 간섭도는 대기오차, 위성 궤도 오차, 처리 오차 등 다양한 오차를 포함하고 있다. 특히 이온층에 의한 위상 지연오차는 파장과 비례 관계에 있기 때문에 장파장을 사용하는 레이더 영상의 경우 이에 대한 오차 보정이 필수적으로 요구된다. 그에 관한 연구로 최근 멀티간섭기법(Multiple Aperture SAR Interferometry, MAI)에 기반된 레이더 간섭도 위상 오차 보정 기법이 개발되었다. 본 연구에서는 이 기법에 대한 소개와 간섭도 생성이 불가능한 지역에 대해서 방향 필터를 이용한 활용 방법을 제시했다. 또한 제시된 방법을 서해 연안 지역을 포함하는 ALOS PALSAR 간섭쌍에 대해 적용하였다. 우선, 기법 비교를 위해 일반적으로 궤도 오차 보정에 많이 사용되는 2차원 다항식 보정 기법을 이용하여 레이더 간섭도의 위상 오차 보정을 수행했다. 그 결과 비행방향을 따라 초기 레이더 간섭도와 같이 저주파 싸인 곡선 형태의 위상 패턴이 그대로 남아 있으며 이는 이온층에 의한 오차 보정이 제대로 수행되지 않았음을 의미한다. 이에 반해, 제시된 방법을 적용한 결과 간섭도 전체에서 특정 패턴이 없어졌으며 비행방향을 따라 ${\pm}1rad$ 내의 안정된 위상 값을 유지하며 이온층에 의한 레이더 간섭도의 위상 왜곡 보정 적용이 잘 되었다. 제안된 방법은 효과적으로 이온층에 의한 위상 오차를 보정함으로써 L- 혹은 P-밴드 시스템의 레이더 간섭도 정확성과 활용성을 높일 수 있는 중요 기술이 될 것이다.

• Journal of Plant Biotechnology
• /
• 제37권1호
• /
• pp.102-109
• /
• 2010

Fructan은 식물이 저온에 노출 되었을 때 다양한 조직에 축적됨으로써 여러 스트레스에 저항을 나타내는 것으로 알려져 있다. 본 연구에서는 fructan 생합성 경로에 관여하는 효소인 1-sst와 1-fft 유전자를 돼지감자 구근으로 부터 분리하였다. 분리한 1-sst와 1-fft 유전자는 Ti-plasmid vector인 KJG V-B2 vector에 35S promoter에 의해 발현할 수 있도록 형질전환용 벡터를 구축하였다. Agrobacterium tumefaciens법에 의해 1-sst와 1-fft 유전자의 형질전환 벼를 육성하였고, 1-sst, 1-fft 및 HPT 유전자 특이적인 primer를 사용하여 PCR 분석한 결과 유전자가 벼의 callus 게놈내에 안정적으로 삽입되었음을 확인하였다. 또한 Southern 및 RT-PCR 분석에서도 같은 결과를 얻었다. 형질전환 벼의 후대에서도 안정적으로 유전자가 발현되는 homo 계통을 선발하였고 이를 이용해 1-sst와 1-fft 유전자의 삽입이 확인된 형질전환 벼에서 유전자의 발현양상을 알아보기 위해 RT-PCR 및 Real-Time PCR를 수행한 결과 형질전환 벼에서 1-sst와 1-fft 유전자 모두 안정적으로 발현되고 있음을 확인하였다. 또한 1-sst와 1-fft 유전자가 삽입된 형질전환 벼를 이용한 기능 분석 연구를 통해 식물체가 저온에 노출되었을 때 1-sst와 1-fft의 작용에 의해 fructan 생합성량이 증가됨을 알 수 있었다. 따라서 본 연구를 통해 얻어진 fructan 생합성 관련 유전자가 삽입된 형질전환 벼는 탄수화물대사 및 저온, 건조 등의 환경 stress에 대한 내성에 대해 좋은 육종 소재로 이용 가능할 것으로 사료된다.

• 한국습지학회지
• /
• 제19권3호
• /
• pp.353-358
• /
• 2017

2,600만 수도권 시민들의 식수원인 한강수계의 경우 수질관리를 위해 비점오염원에 대한 관리가 중요하며 특히 비점오염원이 주요 원인인 유기물질 및 난분해성 물질에 대한 조사가 필요하다. 이번 연구에서는 한강 수계의 주요 3개 하천(남한강, 북한강, 경안천)의 연간 비강우시 난분해성 유기물질을 포함한 유기물질의 유출특성을 연구하였다. 연구결과 유기물질 및 난분해성 물질의 경우 용존성 물질의 비율이 높았으며 전체 부하량중 여름철에 대부분의 부하량이 가장 많았다. 각 하천별 유기물질 및 난분해성 물질의 연간 부하량의 경우 유역면적에 비례하여 남한강, 북한강, 경안천 순서로 나타났다. 각 유역 면적 당 부하량 산정결과 TOC의 경우 경안천, 남한강, 북한강 순서로 나타났으며, R-TOC의 경우 비교적 일정한 유출특성을 보였다.

• 자원환경지질
• /
• 제17권3호
• /
• pp.215-230
• /
• 1984

Petrological, paleomagnetic, geomorphological and structural studies on the southern part of, so called, Chugaryeong rift valley, have been carried out in order to clarify the nature of the rift valley. Three stages of volcanic activities characterized by Jijangbong acidic volcanic rocks and tholeiitic and andesitic basalt of Cretaceous age(?), and Jongok Quaternary olivine basalt occurred along the Dongducheon fault line. Jijangbong acidic volcanic rocks distributed in the central part of the studied area consist of rhyodacite, acidic tuff and tuff breccia, which are bounded by Dongsong fault on the east and Daegwangri fault on the west. The Jongok basalt differs from those of Ulrung and Jeju islands in mineralogy, chemical composition and differentiation. Jongok basalt distributed along the Hantan river dilineates the vesicles curved toward downstream direction and increment of numbers and thickness of lava flow toward upstream direction. These facts suggest that lava flowed from upstream side of the river. Rectangular drainage patterns also support the presence of the Dongducheon, Pocheon, Wangsukcheon and Kyonggang faults which were previously known. LANDSAT image, however, does not show any lineaments which could be counted as a graben or rift valley. Displacement of Precambrian quartzite and Jurassic Daedong supergroup along the southwestern extension of the Dongducheon fault shows the right lateral movement. The Paleomagnetic study of the tholeiitic and andesitic basalts from Baegeuri, Jangtanri and Tonghyeonri located at 2. 3km east, 0km east, and 1.5km west of Dongducheon fault respectively shows that their VGP(Virtual Geomagnetic Pole) being to intermediate geomagnetic field of short duration which suggests that they formed in almost same period. Mean VGP of Jongok basalt is located 82.4N and 80.6E. This is in good coincidence with worldwide VGP of Plio-Pleistocene indicating that Jongok basalt was extruded during Plio-Pleistocene epoch, and suggesting that the studied area has been tectonically stable since then. From the present study, the tectonic episode of the region is concluded as following three stages. 1. The 1st period is worked by the Daebo orogeny of Jurassic during which granodiorite was intruded in Precambrian basement. 2. The 2nd period is the time when right lateral strike-slip fault of NNE-SSW direction was formed probably during late Cretaceous to Paleogene and the Jijangbong acidic volcanic rocks and the older basalts were extruded. 3. The 3rd period is the time when the fault was rejuvenated during Pliocene or Pleistocene accompanied by the eruption of Jongok basalt. As a conclusion, geologic structure of the studied area is rather fault line valley than graben or rift valley, which is formed by differential erosion along the Dongducheon fault suggesting a continuation of the Sikhote-Alin fault. The volcanic rocks including the Jijangbong acidic rocks, tholeiitic-andesitic basalt and olivine basalt are associated with this fault line.