• Asian-Australasian Journal of Animal Sciences
• /
• 제3권2호
• /
• pp.115-120
• /
• 1990

Extracellular nuclease(s) in buffalo rumen fluid were purified from strained rumen fluid by a procedure involving Seitz filtration, acetone fractionation and gel filtration on Sephadex G-100. The enzyme resolved into two peaks exhibiting both DNase and RNase activities. The molecular weight of enzyme corresponding to peaks I and II were approximately 30,000 and 12,000 respectively. The properties of enzymes from the two peaks, however, were same. Optimum temperature for both DNase and RNase activities was at $50^{\circ}C$. Whereas DNase activity was stable upto $60^{\circ}C$, RNase activity was stable only up to $50^{\circ}C$. DNase activity recorded two pH optima, one at pH 5.5 and the other at pH 7.0. RNase activity recorded a broad pH optimum between pH 6.0-8.0. pH stability of the enzyme coincided with pH optima for both the activities. DNase activity was stimulated by $Mg^{2+}$ and $Mn^{2+}$ and inhibited by $Fe^{2+}$, $Zn^{2+}$, $Hg^{2+}$ and $Ag^+$. RNase activity was also stimulated by $Mg^{2+}$ and $Mn^{2+}$ and inhibited by $Cu^{2+}$, $Fe^{2+}$, $Zn^{2+}$, $Hg^{2+}$ and $Ag^+$. Reducing agents stimulated both the activities.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1992년도 한국자동제어학술회의논문집(국내학술편); KOEX, Seoul; 19-21 Oct. 1992
• /
• pp.760-765
• /
• 1992

본 논문에서는 미지의 불확실한 시스템에 적용할 수 있는 제어 알고리즘을 제안하였다. n차 수 단일 입출력 시스템의 상태를 "uncontrolled" 상태와 "controlled" 상태로 분리시키며 아울러 uncontrolled 부시스템이 임의의 n-1개의 특성근(eigen values)을 갖도록 하는 변환 행렬을 유도하고, 이를 이용하여 새로운 강인한 제어기를 설계하였다. 적응 제어 이론과 가변 구조 제어 이론의 개념을 도입하여 새로운 제어 법칙을 제안하였으며 제안된 제어기의 안정도는 Lyapunov 안정도 이론을 이용하여 증명하였다. 컴퓨터 시뮬레이션 결과 제안된 적응 제어 알고리즘이 강인성과 안정성을 갖음을 확인할 수 있었다.

• Journal of Computing Science and Engineering
• /
• 제2권4호
• /
• pp.412-427
• /
• 2008

We propose ID-exchange protocol for Connectionless Location-Awareness Service (CLAS) to locate mobile nodes in indoor sensor network. When adapting location-awareness service to sensor network, the target system must be designed in accordance with various metrics which reflect the system requirement. We especially consider sustainability of the existing service which has been provided for its original purpose, such as environmental monitoring. The detailed meaning of sustainability here is that, even if location-awareness service is newly added to the existing service, the system must be assured to retain a stable network condition, and to deal with newly caused traffic properly. The CLAS ID-exchange protocol is especially designed for fixture and mobile nodes communication to achieve these properties. The protocol operates on 802.15.4 MAC layer to make mobile node work independently of the procedure to build routing table of fixture node, so a stable routing condition can be achieved even if there are many mobile nodes. Moreover, the dedicated frequency channel is assigned only for this protocol, so that traffic caused by location-awareness service can be distributed to another channel. A real system adapting the protocol was implemented to monitor fire and authorities' positions. We verified the overhead and elapsed time for location-awareness. The result shows the proposed protocol has a high performance in detecting speed, traffic distribution, and stability of overall network.

• 한국정보처리학회논문지
• /
• 제6권6호
• /
• pp.1571-1580
• /
• 1999

데이터 마이닝 또는 기계학습을 위한 무감독 학습 알고리즘인 개념적 클러스터링을 이용하여 계층적 구조를 유도해낼 때 자료를 처리하는 순서에 따라 서로 다른 결과에 도달하는 양상을 보인다. 이 순서 바이어스 문제를 해결하는 방안으로 먼저 주어진 자료 세트에 분류를 시행하여 초기 분류를 형성한다. 이 분류를 통해 최종 분류의 가능한 클래스 수를 예측하고 이 정보에 기반하여 자료 분석과 중심 정렬을 통해 자료 처리 순서를 새로이 결정한다. 재배열된 자료 세트에 ITERATE 분류 과정을 적용해 새로운 분류를 생성한다. 본 논문에서는 이 과정을 반복하여 안정적이고 최적의 분류 점수를 갖도록 하는 알고리즘 REIT를 제안하였다. 이 알고리즘을 여러 자료 세트에 적용하고 순서 바이어스의 영향을 최소화하는지 여부를 실험을 통해 비교 분석하였다.

• 전자공학회논문지B
• /
• 제31B권8호
• /
• pp.20-30
• /
• 1994

The lossless bounded real(LBR) two-pair cascade structure is one of the exiting low-sensitivity digital filter structures such as wave digital filters(WDFs) orthogonal filters. They are known to have the same structures which are composed of canonic building blocks interconnected to each other. The LBR two-pair cascade filters amount to describing in a unified manner the existing canonic low-sensitivity filters in terms of transfer matrices and chain matrices. However the existing structures have somewhat degraded low-sensitivity performance because they include dependent parameters within their structures. In this paper we propose a filter structure called “two-type-interlaced(TTI) structure.” eliminating such problem completely. This structures can be viewed as the WDFs of analog ladder circuits. As ladder circuits are obtained by cascading Brune sections and merging neighboring inductors or capacitors. so TTI structures at e obtained by cascading Type 3 LBR two-pairs and merging neighboring Type 1 LBR two-pairs. Next, a test procedure called “LBR test” is also presented in this paper. which determines whether of not the quantized TTI structure is stable . If it is unstable we can fine-tune the quantized parameters to make the overall structure stable. Therefore we can solve the dependent parameter problem completely with TTI structure along with LBR test. test.

• 한국전기전자재료학회논문지
• /
• 제20권6호
• /
• pp.561-565
• /
• 2007

Because of a good wear resistance and a stable contact resistance, Ag-CdO is widely used as electrical contact material. But, the Cd-oxide mainly exists as a coarse particle and adversely affected to environment. As a reason, $Ag-SnO_2$ alloy has been developed. The Sn-oxide maintains stable and fine particle even at high temperature. In order to investigate the effect of Misch metal (Mm) additional that affects the formation of the oxide and the formation of fine matrix Ag, we studied the microstructures and properties of Ag-Sn-In(-Mm) material fabricated by rapid solidification process. The experimental procedure were melting using high frequency induction, melt spinning, and internal oxidation. The Mm addition makes Ag matrix more fine than no Mm addition. The reason is that the addition of Misch metal decreased a latent heat of fusion of alloy, as a result the rapid solidification effect of alloy is increased. The maximum hardness shows at 0.3 wt%Mm. after that the hardness is decreased until 0.4 wt% Mm, but still larger than no Mm addition alloy. At 0.5 wt% Mm alloy, the precipitation of Misch metal causes a decrease of hardness than no Mm addition alloy.

• Journal of Periodontal and Implant Science
• /
• 제37권2호
• /
• pp.277-286
• /
• 2007

The edentulous posterior maxilla generally provides a limited amount of bone height because of atrophy of the ridge and pneumatization of the maxillary sinus, Maxillary sinus augmentation is one of the surgical techniques for reconstruction of the severely resorbed posterior maxilla. The purpose of this study was to evaluate the survival rate of implants and the long-term changes of graft height after maxillary sinus augmentation by lateral window approach. From September 1996 to July 2004, maxillary sinus augmentation with mixed grafts of autograft, allograft, xenograft and alloplast were performed on 45 patients and 100 implants were placed. We evaluated the survival rate of implants and the changes of BL(bone length)/IL(implant length) according to time using panoramic radiographs. The survival rate of implants was 91.0% for follow-up period. The mean reduction of graft heights was 0.34mm(3.0%) for 6 months and 1.22mm(1O.66%) for 3 years after augmentation. The total mean BL/IL was $1.34{\pm}0.21$ during 5 year observation period after augmentation and decreased slightly over time. The result means that graft materials were stable above the implant apex. BL/ILs of 1stage procedure were significantly decreased at 1-2 year, 3-4 year after augmentation and no statistically significant changes were observed in those of 2 stage procedure. The graft materials of both procedures were stable above the implant apex. No statistically significant changes of BL/IL were observed in the grafts combined with low amount of autogenous bone or without autogenous bone. The graft materials of both groups were stable above the implant apex. The results indicated that the placement of dental implants with maxillary sinus augmentation showed predictable clinical results and the grafts combined with low amount of autogenous bone or without autogenous bone had long-term resistance to resorption in maxillary sinus.

• The International Journal of Costume Culture
• /
• 제7권2호
• /
• pp.151-157
• /
• 2004

This research is to conservate the old hat and restore its shape and place it on a supportive form in a stable protective container. The hat is a homemade construction, utilizing three different machine made laces, and two cotton net fabrics. The exterior, particularly the top crown piece, as well as the lace along the brim's edge has been generally soiled and discolored. Inside the crown, the cotton net has broken threads, and thread loss in several areas. The paper covering the two wires is very weak, and has discolored the lace in the areas of contact. The plastic buckles of the velvet ribbon have also discolored the areas where there is contact. The wash/bleach bath procedure was very effective. Virtually all of the light brown surface discoloration stains were removed. The darker brown spots, particularly concentrated around the two paper covered wires and assumed to be rust, were $90\%$ removed by the treatment. The brown spots apparently were due to the degradation of the paper covering, and not caused by the wire itself. The buckram foundation lost about $50\%$ of its stiffness, but this was not a major concern due to the fact that this hat should remain it its mount, which has been designed to serve for both storage and exhibition purposes.

• 한국표면공학회지
• /
• 제34권5호
• /
• pp.516-521
• /
• 2001

Dry etching of Si wafer and $SiO_2$ layers was performed using He/Cl$_2$ mixture plasma by diode-type reactive ion etcher (RIE) system. For Si etching, the Cl molecules react with the Si molecules on the surface and become chemically stable, indicating that the reactants need energetic ion bombardment. During the ion assisted desorption, energetic ions would damage the photoresist (PR) and produce the bad etch Si-profile. Moreover, we have examined the characteristics of the Cl-Si reaction system, and developed the new fabrication procedures with a $Cl_2$/He mixture for Si and $SiO_2$-etching. The developed novel fabrication procedure allows the RIE to be unexpensive and useful a Si deep etching system. Since the etch rate was proved to increase linearly with fHe and the selectivity of Si to $SiO_2$ etch rate was observed to be inversely proportional to fHe.

• 대한기계학회논문집B
• /
• 제30권7호
• /
• pp.671-681
• /
• 2006

This study focuses on the development of numerical procedure to analyze the nonlinear combustion instabilities in liquid rocket engine. Nonlinear behaviors of acoustic instabilities are characterized by the existence of limit cycle in linearly unstable engines and nonlinear or triggering instability in linearly stable engines. To discretize convective fluxes with high accuracy and robustness, approximated Riemann solver based on characteristics and Euler-characteristic boundary conditions are employed. The present procedure predicts well the transition processes from initial harmonic pressure disturbance to N-like steep-fronted shock wave in a resonant pipe. Longitudinal pressure oscillations within the SSME(Space Shuttle Main Engine) engine have been analyzed using the pressure-sensitive time lag model to account for unsteady combustion response. It is observed that the pressure oscillations reach a limit cycle which is independent of the characteristics of the initial disturbances and depends only on combustion parameters and operating conditions.