• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2000년도 춘계학술대회논문집A
• /
• pp.649-654
• /
• 2000

To analyze the effects of the front and rear roll stabilizer bar, five different models of roll stabilizer bar are simulated in this paper. It is shown that the stiffness change of the roll stabilizer bar is an effective way to alter the vehicle's roll gradient. Attaching an actuator at the roll stabilizer bar the vehicle's roll gradient can be controlled within error limits.

• 동력기계공학회지
• /
• 제14권6호
• /
• pp.47-53
• /
• 2010

A stabilizer link connects the stabilizer bar to the lower arm of the suspension. When a vehicle is turning, lateral forces from the tire are transmitted through the stabilizer link into the stabilizer bar. The stabilizer bar will twist, thus adding rigidity to the vehicle body. In this study, the stabilizer link body was manufactured by using composite material with POM-GF25%. Therefore, the strength evaluation of stability link body with composite material carried out from tensile, wear and fatigue test. The tensile strength between the stability link body with composite material and the rod with knurling was the largest of four types of rod. In Analyzing materials property using optical sensing technique of stabilizer link for automobile parts, its has been identified the safety.

• 한국정밀공학회지
• /
• 제15권1호
• /
• pp.160-168
• /
• 1998

In this paper. the Joint reaction forces in the suspension system of a passenger car are determined to calculate the deflections and stresses in the damper strut. A mathematical model of the Roll Stabilizer Bar(RSB) is developed to include the RSB forces in the dynamics analysis. Using these RSB forces, the variations of the damper forces and spring forces due to the wheel strokes are determined in a McPherson strut suspension. The graphs of shear force diagram, bending moment diagram, bending stress and deflections are drawn by the calculated joint reaction forces.

• 대한기계학회논문집A
• /
• 제41권11호
• /
• pp.1119-1124
• /
• 2017

차량 하부에 장착된 스테빌라이저바는 차량이 곡선 구간을 선회할 때 차량의 자체를 유지해 줌으로서 차량 주행을 보다 편안하게 해 준다. 스테빌라이저바는 중실과 중공 타입 2가지가 있으며, 차량의 경량화를 위해 중공 형태의 스테빌라이저바의 적용이 늘고 있다. 차량의 경량화를 위한 중공 스테빌라이저바는 중실에 비해 무게가 34% 이상 경량화가 가능하지만 경량화 비율이 높아질수록 제품의 내구 수명은 급격하게 감소하는 경향을 나타낸다. 이러한 내구 수명 감소에 대한 대책으로서 소재의 고강도 및 고경도 소재를 적용하거나 쇼트피닝 공법을 개선 하는 등의 노력을 통해 내구 수명을 보장할 수 있다.

• 대한임베디드공학회논문지
• /
• 제17권5호
• /
• pp.257-263
• /
• 2022

Active stabilizers use signals such as steering angle, yaw rate, and lateral acceleration to vary the roll stiffness of the front and rear suspension depending on the vehicle's driving conditions, and are attracting attention as RSC (Roll Stability Control) system that suppresses roll when turning and improves ride comfort when going straight. Various studies have been conducted in relation to active stabilizer bars and RSC systems. However, accurate modeling of passive stabilizer model and active stabilizer model and vehicle dynamics analysis result verification are insufficient, and performance result analysis related to vehicle roll angle estimation and electric motor control is insufficient. Therefore, in this study, an accurate vehicle dynamics model was constructed by measuring the passive/active stabilizer bar model and component parameters. Based on this, the analysis result with high reliability was derived by comparing the roll angle estimation algorithm based on the lateral acceleration and suspension of the vehicle with the actual vehicle driving test result. In addition, it was intended to accurately analyze the motor torque characteristics and roll reduction effects of the electric motor-driven RSC system.

• 한국융합학회논문지
• /
• 제12권2호
• /
• pp.173-177
• /
• 2021

본 연구에서는 경차와 대형차의 중공축을 가진 스테빌라이저 모델들의 비틀림 강성과 내구성을 해석하여 서로 비교 및 검토하였다. Model 1이 가해진 모우멘트가 Model 2에 비하여 3배 이상이었지만 최대변형량은 2.6배 정도로 크게 나타났다. Model 1, Model 2 공히, 스테빌라이저 바 링크 목 부분에서 가장 많은 응력을 받는 것으로 보인다. 또한 Model 1의 최대응력은 Model 2보다 2.9배 정도로 크게 나타났다. 대형차에서의 Model 1이 소형차에서의 Model 2 보다 약 20배 이상의 변형 에너지를 보였다. 전반적으로 스테빌라이저의 변형 에너지보다 스테빌라이저 바를 고정해주는 모멘트를 가한 쪽의 브라켓 부분의 값이 큰 것을 확인할 수 있었다. 그리고 본 연구에서의 해석 결과들은 경차나 대형차에서의 스테빌라이저의 내구성이 있는 부품으로서 그 융합연구 설계에 도움이 될 수 있다고 사료된다.

• 한국정밀공학회지
• /
• 제14권7호
• /
• pp.137-143
• /
• 1997

In this study, handling simulation of a passenger car is carried out to see the effects of suspension compliance, roll stabilizef bar and chassis flexibility. The front suspension of the car is a MacPherson strut type and the rear suspension is a multi-link type. The following five DADS models are constructed and compared to verify the effects of suspension compliance and chassis flexibility during lane change. (1) Vdhicle model without hard point compliance and stabilizer, (2) Vehicle model with hard point compoiance, (3) Vehicle model with hard point compliance and stabilizer, (4) Vehicle model with hard point compoiance, stabilizer, and one vibration mode of the chaxxis. (5) Vehicle model with hard point compliance, stabilizer, and three vibration modes of the chassis. The result shows that hard point compliance and stabilizer are significant in roll angle, and the flexibility of the chassis affects the yaw angle and yaw rate.

• 한국자동차공학회논문집
• /
• 제5권5호
• /
• pp.20-26
• /
• 1997

A System for reducing vehicle body roll by active control is developed. The stabilizer bar with hydraulic rotary actuator produces anti-roll moment which suppresses roll tendency. This reduction of roll improves the driving safety as well as the ride comfort. Vehicle test data shows considerable reduction of roll angle during steady-state turning. Also improvement of ride comfort is achieved by making the actuator freely rotatable, i.e. by connecting all chambers of actuator in normal driving conditions. A control algorithm using steering wheel angle and vehicle speed signal as input valve is applied. It is compared with signal of the G-sensor.

• 한국자동차공학회논문집
• /
• 제12권4호
• /
• pp.58-64
• /
• 2004

The purpose of this study is to predict the behavior of fatigue crack propagation as one of fracture mechanics on the compressive residual stress. We got the following characteristics from fatigue crack growth test carried out in the environment of room temperature and low temperature at $25^{\circ}C$, -6$0^{\circ}C$, -8$0^{\circ}C$, and -10$0^{\circ}C$ in the range of stress ratio of 0.3 by means of opening mode displacement. There is a difference between shot peened specimen and unpeened specimen. Fatigue crack growth rate of shot peened specimen was lower than that of unpeened specimen. Shot peening is improve the resistance of crack growth by fatigue that make a compressive residual stress on surface. That is the constrained force about plasticity deformation was strengthened by resultant stress, which resulted from plasticity deformation and compressive residual stress in the process of fatigue crack propagation. Temperature goes down, fatigue crack growth rate decreased.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2004년도 춘계학술대회
• /
• pp.353-358
• /
• 2004

We got the following characteristics from fatigue crack growth test carried out in the environment of room temperature and low temperature at $25^{circ}C$, $-60^{circ}C$, $-80^{circ}C$, and $-100^{circ}C$ in the range of stress ratio of 0.3 by means of opening mode displacement. And there is a difference between shot peened specimen and unpeened specimen. The purpose of this study is to predict the behavior of fatigue crack propagation as one of fracture mechanics on the compressive residual stress. Fatigue crack growth rate of shot peened metal was lower than that of unpeened metal. The compressive residual stress made an impact on tension and compression of the plasticity deformation in fatigue crack plasticity zone. That is. the constrained force about plasticity deformation was strengthened by resultant stress, which resulted from plasticity deformation and compressive residual stress in the process of fatigue crack propagation.