• 한국지반신소재학회논문집
• /
• 제10권1호
• /
• pp.9-18
• /
• 2011

본 연구에서는 비탈면 깎기 시 파괴가 발생한 후 보강공법을 적용하였지만, 집중강우 기간에 비탈면의 부분파괴와 더불어 보강공법으로 적용된 억지말뚝 및 앵커의 변위와 파손 등이 지속적으로 발생한 현장을 대상으로 파괴원인을 분석하였다. 보강된 비탈면의 파괴는 강우가 주원인으로 예측되었으며, 강우침투에 의한 지하수위 상승을 억제하기 위한 대책공법이 필요한 것으로 분석되었다. 이에 대책공법으로서 집수정을 이용한 지하수위 저하공법이 적용된 보강된 비탈면에 대하여 강우에 의한 침투해석 및 안정해석을 수행하였다. 침투해석 결과는 강우가 보강된 비탈면의 주요 파괴원인으로 분석된 결과와 일치하였으며, 대책공법이 적용된 비탈면의 안정해석 결과는 기준안전율을 모두 만족하는 것으로 확인되었다. 따라서 본 연구를 통하여 집수정을 이용한 지하수위 저하공법은 기존의 배수공을 이용한 공법과 병행할 경우, 현재보다 합리적이고 안정화된 대책공법으로서의 적용이 가능할 것으로 판단된다.

• Geomechanics and Engineering
• /
• 제14권6호
• /
• pp.553-562
• /
• 2018

Road construction is becoming increasingly important in marine and desert areas due to population growth and economic development. However, the load carrying capacity of pavement is of gear concern to design and geotechnical engineers because of the poor engineering properties of the soils in these areas. Therefore, stabilization of the soils is regarded as an important issue. Besides, due to the fuels combustion and carbonate decomposition, cement industry generates around 5% of global $CO_2$ emission. Thus, using bentonite as a natural pozzolan in soil stabilization is more eco-friendly than using cement. The aim of this research is to experimentally study of the stabilized marine and desert sands using deep mixing method by ordinary Portland cement and sodium bentonite. Different partial percentages of cement along with different weight percentages of sodium bentonite were added to the sands. Unconfined compression test (UCS), Energy Dispersive X-ray (EDX), and Scanning Electron Microscope (SEM) were conducted on the specimens. Moreover, a mathematical model was developed for predicting the strength of the treated soils.

• 대한기계학회논문집B
• /
• 제20권8호
• /
• pp.2611-2625
• /
• 1996

A numerical method on multi-block technique by Bi-CGSTAB(Bi-Conjugate Gradient STABilized) solver has been proposed. The present multi-block technique can reduce the numerical manipulation greatly because the common regions at the interface of each block are not necessary. In order to test the computational performance of present multi-block technique, the flow characteristics in a T type duct system and a N type duct system have been investigated by three kinds of methods such as the single-block method, the previous multi-block technique and the multi-block technique with Bi-CGSTAB solver. The results indicated that the required CPU time by present multi block technique was shorter than that of other two numerical methods and the convergency history was shown very stable at the present multi-block technique.

• 한국세라믹학회지
• /
• 제42권6호
• /
• pp.411-416
• /
• 2005

Y-TZP(Yttria-stabilized Tetragonal Zirconia Polycrystal) ceramics are of great interest as engineering and structural materials due to their excellent mechanical properties arising from transformation toughening, it is also reported that the 3Y-TZP($3 mol\%$ Yttria-stabilized Tetragonal Zirconia Polycrystal) has the best mechanical properties in Y-TZP ceramics. But to use widely for engineering and structural materials, it remains an important challenge to be able to improve its fracture toughness. In order to produce the 3Y- TZP ceramics showing much better mechanical properties, milling method adding monoclinic zirconia to 3Y-TZP was adopted and the resultant mechanical properties containing apparent density and fracture toughness were measured by using proper techniques. Experimental results showed that the 3Y-TZP specimen containing $33 wt\%$ of monoclinic zirconia, which was sintered at $1450^{\circ}C$, has the highest fracture toughness value of $11.38 MPa{\cdot}m^{1/2}$ which is three times higher than that of normal 3Y-TZP ceramics.

• 한국세라믹학회지
• /
• 제43권2호
• /
• pp.69-73
• /
• 2006

A full retention of the tetragonal phase with coarse grains $(50\~60\;{\mu}m)$ was possible with the specimen $ZrO_2-1.9\;mol\%\;Y_2O_3$. In these coarse grains, $\{101\}_t$ annealing twins were frequently observed, although they do not exist in the usual fine grained specimens. The morphology and growth rate of the isothermally formed individual products are studied at an optical microscopic level. The habit planes of both products are also identified by performing two-surface trace analysis on the grains whose orientations are determined by the Electron Back Scattering Pattern (EBSP) method. The morphologies of isothermal martensite were well-defined thin plates and lenticular types. The growth rate in their longitudinal directions was quite slow and temperature-dependent. A two-surface trace analysis, incorporated with the EBSP method, identified the habit planes near $\{013\}_c$, in agreement with previous reports obtained from TEM works.

• 한국연소학회지
• /
• 제20권1호
• /
• pp.24-31
• /
• 2015

Flame structure, which contains a useful information for studying combustion instability of the flame, is often quantitatively visualized with PLIF (planar laser-induced fluorescence) and/or chemiluminescence images. The latter, a line-integral of a flame property, needs to be preprocessed before being inverted, mainly due to its inherent noise and the axisymmetry assumption of the inversion. A preprocessing scheme utilizing multi-division of ROI (region of interest) of the chemiluminescence image is proposed. Its feasibility has been tested with OH PLIF and $OH^*$ chemiluminescence images of SNG (synthetic natural gas) swirl-stabilized flames taken from a model gas turbine combustor. It turns out that the multi-division technique outperforms two conventional ones: those are, one without preprocessing and the other with uni-division preprocessing, reconstructing the SNG flame structure much better than its two counterparts, when compared with the corresponding OH PLIF images. It is also found that the Canny edge detection algorithm used for detecting edges in the multi-division method works better than the Sobel algorithm does.

• Geomechanics and Engineering
• /
• 제32권6호
• /
• pp.639-652
• /
• 2023

Stepped earth slopes incorporated with anti-slide piles are widely utilized in landslide disaster preventions. Explicit consideration of the three-dimensional (3D) effect in the slope design warrants producing more realistic solutions. A 3D limit analysis of the stability of pile stabilized stepped slopes is performed in light of the kinematic limit analysis theorem. The influences of seismic excitation and surcharge load are both considered from a kinematic perspective. The upper bound solution to the factor of safety is optimized and compared with published solutions, demonstrating the capability and applicability of the proposed method. Comparative studies are performed with respect to the roles of 3D effect, pile location, pile spacing, seismic and surcharge loads in the safety assessments of stepped slopes. The results demonstrate that the stability of pile reinforced stepped slopes differ with that of single stage slopes dramatically. The optimum pile location lies in the upper portion of the slope around L_x/L = 0.9, but may also lies in the shoulder of the bench. The pile reinforcement reaches 10% universally for a looser pile spacing D_c/d_p = 5.0, and approaches 70% when the pile spacing reaches D_c/d_p = 2.0.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1994년도 Proceedings of the Korea Automatic Control Conference, 9th (KACC) ; Taejeon, Korea; 17-20 Oct. 1994
• /
• pp.213-217
• /
• 1994

The attitude stability of a satellite in spin-stabilized injection mode which contains a liquid pool is investigated. The satellite model for investigation is a two-body system consisting of a the main body, which is symmetric and rigid, representing the spacecraft, and a spherical pendulum, representing the liquid pool. Assuming that both spacecraft and pendulum are in states of steady spin about the symmetry axis of the spacecraft, the coupled nonlinear equations of motion for the system are simplified. In this paper, by using the multiple scales method, the possible resonance conditions in terms of the system parameters are determined and the corresponding near-resonant solutions are derived.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1996년도 하계학술대회 논문집 B
• /
• pp.1128-1130
• /
• 1996

A canonical form observer design method for nonlinear systems is studied. Through this method, an observer of single link robot system with flexible joint is proposed. It is shown through simulation that the system can be stabilized when using the nonlinear feedback linearizing controller and the supposed observer.

• 한국통신학회논문지
• /
• 제28권10C호
• /
• pp.1023-1032
• /
• 2003

MPEG-4와 같은 객체 기반 부호화는 멀티미디어 응용을 위한 다양한 내용 기반 기능들을 제공한다. 압축 효율의 향상과 더불어 이러한 기능들이 지원되도록 하기 위해서는 비디오 데이터의 각 프레임은 비디오 객체로 분할되어야 한다. 본 논문에서는 비선형 다중스케일 필터링과 시공간 정보를 사용한 효과적인 비디오 객체 분할 기법을 제안한다. 제안된 방법은 안정화된 역 확산 방정식(Stabilized Inverse Diffusion Equation : SIDE)에 기반한 비선형 다중스케일 필터링을 사용하여 공간적 분할을 수행한다. 또한 구해진 초기 분할된 영역들은 인접 영역 그래프 (Region Adjacency Graph : RAG)를 사용하여 병합된다. 본 논문에서는 통계적 유의성 검사(Statistical significance test)와 시변 메모리(Time-variant memory)를 시간적 분할 방법으로 사용하며 구해진 공간적 분할과 시간적 분할을 결합하여 최종 객체 영역을 효과적으로 분할한다. 본 논문에서 제안된 공간적 분할 방법은 기존의 형태학적 Watershed 알고리즘에 비해 잡음에 강인한 분할 특성을 나타내었으며 기존의 A. Neri의 방법과 비교하였을 때, 최종 분할된 객체 영역의 정확도 비율이 Akiyo는 43%, Claire는 29% 정도 향상됨을 확인할 수 있었다.