• Journal of Environmental Health Sciences
• /
• v.31 no.4 s.85
• /
• pp.266-279
• /
• 2005

The present study was conducted to analyze the causes of stress on the part of Korean radiological technologists depending on their working environments. For this purpose, 890 questionnaires were distributed to and collected from radiological technologists who were working at 44 general hospitals in 16 cities and provinces of Korea during the period from the mid July to the end of August 2003. The collected data were compared between regions, divided into the capital, metropolitan, medium and small cities, whose results are as follows: 1. As factors affecting working conditions, drinking was found to exert more influence on radiological technologists in small- and medium-sized cities, while loyalty to immediate seniors and organizations was the one producing greater influence on them in metropolitan cities than other cities. Overall, position, job satisfaction and physical condition seemed to have a great effect on them (p<0.001).2. In terms of factors related to their roles, job satisfaction and physical condition played in general a greater role for radiological technologists (p<0.001). Immediate seniors and behavioral conducts were also found to have a lot influence on them (p<0.01).3. As for job conflicts, the kind of medical institutions seemed to exercise a great deal of impact on radiological technologists (p<0.05), while colleagues, immediate seniors, job satisfaction and physical conditions also produced a lot of influence on them as a whole (p<0.001).4. Regarding job autonomy, radiological technologists were found to have been less influenced by position in metropolitan cities and by immediate seniors in the capital city (p<0.01). As a whole, however, age and job satisfaction acted as decisive factors of influence on them (p<0.001). 5. Among factors related to job burden, gender played a bigger role for radiological technologists in metropolitan cities as the kind of medical institutions did in small- and medium-sized cities. Centrally, job satisfaction and behavioral conducts exercised a great impact on them (p<0.001).6. Job stability seemed to be more immensely linked to gender and physical conditions in metropolitan cities whereas position did more in the capital city. In general, how ever, job satisfaction produced a far-reaching (p<0.001).

• Journal of the Korean Institute of Gas
• /
• v.2 no.1
• /
• pp.7-13
• /
• 1998

In this study, for the safety performance of LNG storage tank, the fracture toughness in X-grooved weld HAZ(heat-affected zone) of $9\%$ Ni steel was evaluated qualitatively and quantitatively, and the relation with the change in microstructure was analyzed. The toughness assessment was peformed through the modified CTOD test proposed for thick weldment with X-groove. Additionally, microstructures of HAZ were evaluated by OM, SEM and XRD. From the results, HAZ toughness of SMA(shielded metal arc)-welded $9\%$ Ni steel decreased as the evaluated region approached the fusion line. The decrease in toughness was apparently caused by the increase in the fraction of coarse-grained zone within HAZ. On the other hand, toughness drop with decreasing test temperature in F.L.(fusion line) ${\~}$F.L.+3mm was larger than that in F.L.+5mm${\~}$F.L.+7mm region due to the fact that in the former regions, retained austenite had poor stability.

• Korean Chemical Engineering Research
• /
• v.57 no.1
• /
• pp.11-16
• /
• 2019

$La_{0.6}Sr_{0.4}Ti_{0.3}Fe_{0.7}O_{3-{\delta}}$(LSTF) coated $Ba_{0.5}Sr_{0.5}Co_{0.8}Fe_{0.2}O_{3-{\delta}}$(BSCF) membranes which has properties of high oxygen permeability and stability to $CO_2$ were applied to a bench scale apparatus to conduct oxygen permeation experiments. Also, the membranes of the laboratory and the bench scale device were divided into three regions according to the temperature gradient in the membrane reactor for comparative analysis. While oxygen permeation experiment were conducted up to $900^{\circ}C$, temperature dependence of Cr deposition was investigated. As a result, it was confirmed that the oxygen permeability was $2.37ml/min{\cdot}cm^2$, which was significantly lower than $3.79ml/min{\cdot}cm^2$ measured in the laboratory apparatus. It was found through XRD and SEM/EDS analysis that the decrease in oxygen permeability was originated from the deposition of gaseous Cr on the membrane surface released from the alloy material of the housing. In particular, a large amount of Cr was found in the medium temperature region.

• The Journal of Engineering Geology
• /
• v.29 no.2
• /
• pp.123-136
• /
• 2019

This study examines the effect of collector well installed to reduce groundwater level in the regions with the occurrence of landcreep, a soil mass movement triggered by instability on slopes. Slopes are prone to failure as a result of instability caused by its internal, topographic and geological properties as well as due to external factors such as rainfall and earthquake. In Korea during the rain season, rainfall infiltration affects the groundwater level in soil, building up porewater pressure and load, and finally drives slopes to collapse. Slope failure caused by rainfall infiltration has been leading to a drastic forest degradation. The studied slope is located adjacent to a valley, its terrain corresponds to piedmont gentle slope, while the upper part of the failure surface is steep. After reinforcing the terrain where landcreep had occurred and installing collector well on the slope, we measured the changes in the groundwater level. In order to analyze the relationship between the well and the slope, we calculated the ratio of groundwater level to rainfall before and after the installation of the collector well. As a result, it is confirmed that the ratio increases after the installation of the well, which in turn reduces the groundwater level. Analysis of the change in groundwater level after 3, 7, 15 days antecedent rainfall showed that the higher the overall groundwater level, the less the value ($r_p$) of groundwater level-rainfall ratio is, while the value becomes relatively greater when the groundwater level is low. In particular, if a slope has a large catchment basin as is in the case of the studied site, antecedent rainfall affects groundwater level in the order of 3 < 7 < 15 days.

• Journal of the Korean GEO-environmental Society
• /
• v.22 no.7
• /
• pp.13-20
• /
• 2021

The problem of subsidence of the roadbed near the Honam High Speed Railway, which opened in April 2015, continues to be raised, and the ground stability of the area near the Honam High Speed Railway may also be problematic. It is very important to select the factors that determine the indicators and indicators in producing the risk maps. Existing risk indicators are calculated as the final displacement volume based on the last observed date of the observed period, and time-series indicator displacement must be identified to analyze the cause of subsidence and the behavior of the indicator. Furthermore, for a wide range of regions, it is economically inefficient to conduct direct level measurements, so we wanted to observe surface displacement using SAR images. In this paper, time series indicator displacement was observed using PS-InSAR techniques, and risk was compared by rating each factor using the difference between final indicator displacement, cumulative indicator displacement, minimum displacement and maximum displacement as factors for determining risk indicators. As a result, the risk rating of the final displacement is different from that of each factor, and we propose adding factors from different perspectives in determining risk indicators. It is expected to be an important study in finding the cause of ground subsidence and finding solutions.

• Journal of the Korean Geotechnical Society
• /
• v.38 no.12
• /
• pp.125-134
• /
• 2022

The Global Expansion Roadmap published by the International Space Exploration Coordination Group, which is organized by space agencies around the world, presents future lunar exploration guidance and stresses a lunar habitat program to utilize lunar resources. The Moon attracts attention as an outpost for deep space exploration. Simulating lunar surface environments is required to evaluate the performances of various equipment for future lunar surface missions. In this paper, an experimental study was conducted to simulate high vacuum pressure and cryogenic temperature of the permanent shadow regions in the lunar south pole, which is a promising candidate for landing and outpost construction. The establishment of an efficient dirty thermal vacuum chamber (DTVC) operation process has never been presented. One-dimensional ground cooling tests were conducted with various vacuum pressures with the Korean Lunar Simulant type-1 (KLS-1) in DTVC. The most advantageous vacuum pressure was found to be 30-80 mbar, considering the cooling efficiency and equipment stability. However, peripheral cooling is also required to simulate a cryogenic for not sublimating ice in a high vacuum pressure. In this study, an efficient peripheral cooling operation process was proposed by applying the frost ratio concept.

• Journal of the Korean Geotechnical Society
• /
• v.38 no.3
• /
• pp.5-16
• /
• 2022

Ground in extremely cold and hot regions can sink by various environmental factors. Ground settlement can generate the negative skin friction to pile shaft, increase the base load of pile, and cut the stability of the pile. This study proposed a member responding ground deformation which can be inserted inside the pile. The member slightly compresses according to the ground settlement to reduce the negative skin friction. As the member materials, this study considered spring and spring-dashpot. To assess the ability of the member, the present research performed model tests for piles with or without the member within settled ground. In the model tests, the base load, total shaft resistance, and horizontal earth pressure were monitored and analyzed. Experimental results show that the pile with spring member can reduce the negative skin friction under small settlement conditions whereas it acts similar to the pile without the member under large settlement conditions as the spring was no longer compressed. However, the pile with the spring-dashpot member can reduce the negative skin friction continuously upon the ground settlement as the dashpot delays the load transfer to the spring and locates friction force on the unloading path.

• Asia-pacific Journal of Multimedia Services Convergent with Art, Humanities, and Sociology
• /
• v.7 no.2
• /
• pp.401-408
• /
• 2017

GNSS(Global Navigation Satellite System) is positioning and navigation system using satellites. Accurate positioning is possible in all regions of the world using satellite signals. In Korea, GPS was introduced in the late 1980s. GPS is used in research and work in various fields such as navigation, surveying, and GIS. Since 1995, NGII(National Geographic Information Institute) has installed and operated CORS(Continuously Operating Reference Station) for the practical use of GNSS surveying, RINEX download and VRS(Virtual Reference Station) service was provided for precise positioning. Demand for these services is explosively increasing in the field of surveying. Therefore, there is a need for research to provide good service. In this study, status of national surveying infra structure was researched focused on CORS and its services. As a results, current status of CORS and service were presented. Users of VRS service has increased greatly. In order to provide stable service and advanced surveying, it is necessary to continuously upgrade services such as providing services for various GNSS satellites and securing stability through server redundancy in the data center.

• Journal of Dental Rehabilitation and Applied Science
• /
• v.40 no.3
• /
• pp.169-178
• /
• 2024

Recently, several attempts have been made to integrate AI into the field of dentistry. To overcome the limitations of traditional fixed prosthetic fabrication methods such as CAD-CAM (computer-aided design-computer-aided manufacturing), AI programs are being developed for automated crown fabrication, and various studies are underway to applicate in clinical situation. In these case studies, single-unit fixed prostheses were fabricated using an AI program (Dentbird Crown, Imagoworks Inc, Seoul, Korea) in both the anterior and posterior regions and the fabrication time and accuracy were compared with previously used CAD-CAM method. The first case is a 44-year-old woman who presented for re-fabrication of a zirconia prosthesis due to a prosthesis fracture on the lingual side of the upper right lateral incisor. The second case is a 53-year-old male patient who presented for a crown restoration on an upper left first molar following root canal treatment, where he received a final zirconia restoration. In both cases, the first prosthesis was designed manually using a CAD program, the second prosthesis was designed using AI alone, and the third prosthesis was designed using AI and then modified by CAD program, and the three designs were superimposed to compare suitability. When evaluated after temporary placement, the final prosthesis demonstrates adequate stability, retention and support, resulting in functional and esthetic satisfaction.

• Korean Journal of Mineralogy and Petrology
• /
• v.37 no.2
• /
• pp.67-76
• /
• 2024

In light of the development of modern high-tech industries, where human sustainability is becoming increasingly important, anorthosite needs to be reevaluated not only for its potential as a new source of aluminum, but also as a primary resource with a wide range of industrial applications. In particular, a relatively simple chemical composition with a high CaO content and Al₂O₃/SiO₂ ratio, along with its relatively low impurity levels and chemically stable nature offers significant advantages in industrial processes. Thus, anorthosite is considered as an important industrial resource in the age of energy transition. In this review, we examine the mineralogical and geochemical characteristics of anorthosite that determines their stability and reactivity. Based on their characteristics, we propose the potential use of utilizing the anorthosite as an alternative to the Bayer process which has the limitations. We also explore its application as the eco-friendly geo-synthetic materials, and as the new materials for carbon dioxide storage and utilization. As the demand for aluminum applications accelerates, anorthosite is gaining their importance in the geological industry and clean energy field. Therefore, advanced and extensive research on anorthosite complex occurring in the Hadong and Sancheong regions of Korea is critical to obtain opportunities to enhance economic advantages through efficient utilization of national resources and to lead to sustainable development.