• PNF and Movement
• /
• v.21 no.2
• /
• pp.255-263
• /
• 2023

Purpose: This study aims to investigate the immediate effects of electromyography (EMG) biofeedback training of the gluteus medius on dynamic balance during single leg squats in healthy individuals. Methods: The sample size in this study was estimated using the G-power program at an effect size of 0.4, a significance level (α) of 0.05, and a testing power of 0.90. In addition, as a result of considering the 10% dropout rate, this study recruited 21 healthy individuals (8 males and 13 females). All subjects measured the Y-balance test-lower quarter (YBT-LQ) and limits of stability (LOS) before and after a single leg squat (SLS) and SLS with EMG biofeedback training of the gluteus medius (SLSEB). They were trained for 10 minutes for each exercise, and two dynamic balance tests were performed three times. Results: There was a significant difference in the YBT-LQ score between the two exercises (p < 0.05). In the YBT-LQ score, there was a significant difference before and after SLS and SLSEB (p < 0.05). SLSEB showed a significantly higher YBT-LQ score than SLS (p < 0.05). There was a significant difference in LOM between the two exercises (p < 0.05). However, there was no significant difference between the two exercises. Conclusion: A single-leg squat with EMG biofeedback exercises is an effective method to improve dynamic balance, such as the YBT-LQ.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.28 no.5C
• /
• pp.303-311
• /
• 2008

In the case of bi-directional high pressure pile load test with double-acting jack, the shortcomings of bi-directional pile load test with single-acting jack could be solved, low-cost of test could be sure, the limits of loading capacity could be overcome and quality assurance of service plie could be confirmed. In this study, to confirm the stability, the reliability and the application of bi-directional high pressure pile load test with double-acting jack, the calibration test for high pressure oil jacks, the length of high pressure hose and tunable high pressure pipe system were performed. As a result, credibility was very high because the reliability of test results was approached at about 1.0.

• Korean Journal of Materials Research
• /
• v.33 no.11
• /
• pp.491-496
• /
• 2023

As the demand for p-type semiconductors increases, much effort is being put into developing new p-type materials. This demand has led to the development of novel new p-type semiconductors that go beyond existing p-type semiconductors. Copper iodide (CuI) has recently received much attention due to its wide band gap, excellent optical and electrical properties, and low temperature synthesis. However, there are limits to its use as a semiconductor material for thin film transistor devices due to the uncontrolled generation of copper vacancies and excessive hole doping. In this work, p-type CuI semiconductors were fabricated using the chemical vapor deposition (CVD) process for thin-film transistor (TFT) applications. The vacuum process has advantages over conventional solution processes, including conformal coating, large area uniformity, easy thickness control and so on. CuI thin films were fabricated at various deposition temperatures from 150 to 250 ℃ The surface roughness root mean square (RMS) value, which is related to carrier transport, decreases with increasing deposition temperature. Hall effect measurements showed that all fabricated CuI films had p-type behavior and that the Hall mobility decreased with increasing deposition temperature. The CuI TFTs showed no clear on/off because of the high concentration of carriers. By adopting a Zn capping layer, carrier concentrations decreased, leading to clear on and off behavior. Finally, stability tests of the PBS and NBS showed a threshold voltage shift within ±1 V.

• Korean Journal of Agricultural Science
• /
• v.50 no.3
• /
• pp.539-549
• /
• 2023

Domestic processed food exports might increase due to the free trade agreement (FTA) and spread of the Korean Wave, Hallyu. However, the share of the domestic raw materials in the domestic processed food industry is very low at 31.4%, which limits the spillover effect on domestic agriculture. Therefore, we selected frozen dumplings as a representative processed food whose exports are growing rapidly and conducted a multiple regression analysis to examine the effects of Hallyu and FTA variables on the frozen dumpling exports. We tried to link them to an increase in agricultural income through the expansion of demand for the domestic raw materials. This study analyzed tariff indicator as the FTA variable, cosmetics export value indicator as the Hallyu Wave variable, and other variables expected to change the trade environment such as gross domestic product (GDP) and the relative exchange rate by country as the key explanatory variables that affect changes in the trade environment. The analysis showed that the core hypothesis, the Hallyu variable and the FTA variable, have a positive impact on frozen dumpling exports. Frozen dumpling exports are expected to increase as the FTAs and the spread of Hallyu are expected to continue for the foreseeable future. Therefore, we should seek ways to increase the proportion of domestically produced ingredients in the frozen dumplings to spread the economic impact to domestic agriculture. We reviewed previous studies and determined, the price-related factors play a major role in the use of imported ingredients, and that price stability and competitiveness are essential to increase the share of the domestically produced ingredients. Based on these conclusions, we reviewed the current status of food industry-related policies and determined measures needed to expand the use of domestically produced ingredients.

• Journal of The Korean Astronomical Society
• /
• v.56 no.2
• /
• pp.277-286
• /
• 2023

It is difficult to distinguish the pure signal produced by an orbiting planetary companion around giant stars from other possible sources, such as stellar spots, pulsations, or certain activities. Since 2003, we have obtained radial (RV) data from evolved stars using the high-resolution, fiber-fed Bohyunsan Observatory Echelle Spectrograph (BOES) at the Bohyunsan Optical Astronomy Observatory (BOAO). Here, we report the results of RV variations in the binary star HD 135438. We found two significant periods: 494.98 d with eccentricity of 0.23 and 8494.1 d with eccentricity of 0.83. Considering orbital stability, it is impossible to have two companions in such close orbits with high eccentricity. To determine the nature of the changes in the RV variability, we analyzed indicators of stellar spot and stellar chromospheric activity to find that there are no signals related to the significant period of 494.98 d. However, we calculated the upper limits of rotation period of the rotational velocity and found this to be 478-536 d. One possible interpretation is that this may be closely related to the rotational modulation of an orbital inclination at 67-90 degrees. The other signal corresponding to the period of 8494.1 d is probably associated with a stellar companion orbiting the giant star. A Markov Chain Monte Carlo (MCMC) simulation considering a single companion indicates that HD 135438 system hosts a stellar companion with 0.57^+0.017 _-0.017 M_⊙ with an orbital period of 8498 d.

• The Korean Journal of Physiology and Pharmacology
• /
• v.28 no.3
• /
• pp.275-284
• /
• 2024

Worldwide, cardiovascular disease is the main cause of death, which accordingly increased by hyperlipidemia. Hyperlipidemia therapy can include lifestyle changes and medications to control cholesterol levels. Statins are the medications of the first choice for dealing with lipid abnormalities. Rosuvastatin founds to control high lipid levels by hindering liver production of cholesterol and to achieve the targeted levels of low-density lipoprotein cholesterol, another lipid lowering agents named ezetimibe may be used as an added therapy. Both rosuvastatin and ezetimibe have low bioavailability which will stand as barrier to decrease cholesterol levels, because of such depictions, formulations of this combined therapy in nanotechnology will be of a great assistance. Our study demonstrated preparations of nanoparticles of this combined therapy, showing their physical characterizations, and examined their behavior in laboratory conditions and vivo habitation. The mean particle size was uniform, polydispersity index and zeta potential of formulations were found to be in the ranges of (0.181-0.72) and (-13.4 to -6.24), respectively. Acceptable limits of entrapment efficiency were affirmed with appearance of spherical and uniform nanoparticles. In vitro testing showed a sustained release of drug exceeded 90% over 24 h. In vivo study revealed an enhanced dissolution and bioavailability from loaded nanoparticles, which was evidenced by calculated pharmacokinetic parameters using triton for hyperlipidemia induction. Stability studies were performed and assured that the formulations are kept the same up to one month. Therefore, nano formulations is a suitable transporter for combined therapy of rosuvastatin and ezetimibe with improvement in their dissolution and bioavailability.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2012.08a
• /
• pp.115-116
• /
• 2012

The demand for flexible electronic systems such as wearable computers, E-paper, and flexible displays has increased due to their advantages of excellent portability, conformal contact with curved surfaces, light weight, and human friendly interfaces over present rigid electronic systems. This seminar introduces three recent progresses that can extend the application of high performance flexible inorganic electronics. The first part of this seminar will introduce a RRAM with a one transistor-one memristor (1T-1M) arrays on flexible substrates. Flexible memory is an essential part of electronics for data processing, storage, and radio frequency (RF) communication and thus a key element to realize such flexible electronic systems. Although several emerging memory technologies, including resistive switching memory, have been proposed, the cell-to-cell interference issue has to be overcome for flexible and high performance nonvolatile memory applications. The cell-to-cell interference between neighbouring memory cells occurs due to leakage current paths through adjacent low resistance state cells and induces not only unnecessary power consumption but also a misreading problem, a fatal obstacle in memory operation. To fabricate a fully functional flexible memory and prevent these unwanted effects, we integrated high performance flexible single crystal silicon transistors with an amorphous titanium oxide (a-TiO2) based memristor to control the logic state of memory. The $8{\times}8$ NOR type 1T-1M RRAM demonstrated the first random access memory operation on flexible substrates by controlling each memory unit cell independently. The second part of the seminar will discuss the flexible GaN LED on LCP substrates for implantable biosensor. Inorganic III-V light emitting diodes (LEDs) have superior characteristics, such as long-term stability, high efficiency, and strong brightness compared to conventional incandescent lamps and OLED. However, due to the brittle property of bulk inorganic semiconductor materials, III-V LED limits its applications in the field of high performance flexible electronics. This seminar introduces the first flexible and implantable GaN LED on plastic substrates that is transferred from bulk GaN on Si substrates. The superb properties of the flexible GaN thin film in terms of its wide band gap and high efficiency enable the dramatic extension of not only consumer electronic applications but also the biosensing scale. The flexible white LEDs are demonstrated for the feasibility of using a white light source for future flexible BLU devices. Finally a water-resist and a biocompatible PTFE-coated flexible LED biosensor can detect PSA at a detection limit of 1 ng/mL. These results show that the nitride-based flexible LED can be used as the future flexible display technology and a type of implantable LED biosensor for a therapy tool. The final part of this seminar will introduce a highly efficient and printable BaTiO3 thin film nanogenerator on plastic substrates. Energy harvesting technologies converting external biomechanical energy sources (such as heart beat, blood flow, muscle stretching and animal movements) into electrical energy is recently a highly demanding issue in the materials science community. Herein, we describe procedure suitable for generating and printing a lead-free microstructured BaTiO3 thin film nanogenerator on plastic substrates to overcome limitations appeared in conventional flexible ferroelectric devices. Flexible BaTiO3 thin film nanogenerator was fabricated and the piezoelectric properties and mechanically stability of ferroelectric devices were characterized. From the results, we demonstrate the highly efficient and stable performance of BaTiO3 thin film nanogenerator.

• Journal of the Korean Society of Combustion
• /
• v.18 no.4
• /
• pp.37-43
• /
• 2013

The effects of preferential diffusion of hydrogen in interacting counterflow $H_2$-air and CO-air premixed flames were investigated numerically. The global strain rate was varied in the range $30-5917s^{-1}$, where the upper bound of this range corresponds to the flame-stretch limit. Preferential diffusion of hydrogen was studied by comparing flame structures for a mixed average diffusivity with those where the diffusivities of H, $H_2$ and $N_2$ were assumed to be equal. Flame stability diagrams are presented, which show the mapping of the limits of the concentrations of $H_2$ and CO as a function of the strain rate. The main oxidation route for CO is $CO+O_2{\rightarrow}CO_2+O$, which is characterized by relatively slow chemical kinetics; however, a much faster route, namely $CO+OH{\rightarrow}CO_2+H$, can be significant, provided that hydrogen from the $H_2$-air flame is penetrated and then participates in the CO-oxidation. This modifies the flame characteristics in the downstream interaction between the $H_2$-air and CO-air flames, and can cause the interaction characteristics at the rich and lean extinction boundaries not to depend on the Lewis number of the deficient reactant, but rather to depend on chemical interaction between the two flames. Such anomalous behaviors include a partial opening of the upper lean extinction boundary in the interaction between a lean $H_2$-air flame and a lean CO-air flame, as well as the formation of two islands of flame sustainability in a partially premixed configuration with a rich $H_2$-air flame and a lean CO-air flame. At large strain rates, there are two islands where the flame can survive, depending on the nature of the interaction between the two flames. Furthermore, the preferential diffusion of hydrogen extends both the lean and the rich extinction boundaries.

• Journal of the Korean Geographical Society
• /
• v.51 no.1
• /
• pp.143-166
• /
• 2016

This study aims to consider spiritual therapeutic landscapes thought the case of catholic sacred places in Korea. The catholic sacred places, which have been a series of persecution, are distributed in 300 all over the country and can be divided into a formational type, a selective type, and a participatory type. In the formational type, the catholic sculptures are scattered here and there; but it seems that there are limits somewhat to feel the emotional stability and the experience of caring by God. Because the formational type is deserted or is built up in unnoticeable urban areas. The religious factors, for example, museums, special pray, Station of the Cross, Rosary way, statues of the Virgin Mary, catholic sculptures, etc. in the selective type are placed in the corners of the catholic sacred places to provide the opportunity of holy experience to pilgrims. But the level and the intensity of healing depends on the matter as to how much pilgrims experience religious factors voluntarily. Lastly, the participatory type means the experience of various religious factors following scheduled programs. The experience is for the group of pilgrims, not a person; and the human relationship via the religious experience spiritualizes the network of interest towards other participants. Furthermore, the spiritualized open mind towards other people becomes the power that can arrive at the emotional stability, the relief of stress, and the in-depth and authentic healing. Ultimately, the spiritual healing through religious factors is to realize human finitude and dedicate one's own self to God; in addition, the spiritual therapeutic landscapes are the place that can carry out such a spiritual ritual without any restraint.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.14 no.1
• /
• pp.45-54
• /
• 2008

"Summer Deadweight Tonnage(SDWT)" is used as the criteria of the berthing capacity when establishing port entry limits under current guideline. The important factors affecting to the maximum ship size of possible berthing are mass, length and breath of the ship rather than deadweight. Therefore this guideline should be modified to ensure safety and efficient operation of berth. This study aimed to propose a rational guideline to adjust the berthing capacity. In order to decide proper berthing capacity, three berths of Port of Ulsan were selected and systematic evaluations for the safety of passage transit, berthing maneuvers, ship motions at berth and stabilities of structures were conducted. Small changes of ship size had little effect on those characteristics and little significant differences were found according to the increase of ship size at the same displacement. The evaluation results of the increasement of 50% of berthing capacity at 20,000 DWT, 25% at 40,000 DWT and 13% at 150,000 DWT were within the design criteria in which the berths were built. Therefore, if the channel width, diameter of turning circle, berth length and mooring arrangements are satisfied with the criteria, the current berth limitations should be adjusted by the displacement. as substitute for the deadweight.