• Journal of Veterinary Clinics
• /
• v.32 no.4
• /
• pp.308-312
• /
• 2015

This study was aimed to evaluate the effects of tramadol hydrochloride on the minimum alveolar concentration of isoflurane ($MAC_{ISO}$) in dogs. Six healthy, female German shepherd dogs (aged 1-2 years) were used in this study. Anesthesia was induced by mask induction and maintained with isoflurane in oxygen. Mechanical ventilation maintained the end-tidal $CO_2$ partial pressure ($P_{ET}CO_2$) from 35 to 45 mmHg throughout the study. A baseline $MAC_{ISO}$ ($MAC_{ISO}B$) was determined starting 45 minutes after induction of anesthesia by clamping a pedal digit until gross purposeful movement was detected. After $MAC_{ISO}B$ determination, dogs received a tramadol loading dose of 3 mg/kg followed by a continuous rate infusion (CRI) of 2.6 mg/kg/h. The determination of $MAC_{ISO}$ after administration of tramadol ($MAC_{ISO}T$) began 20 min after the start of the CRI. Arterial blood pressure and heart rate were recorded continuously and arterial blood samples for blood gas analysis were collected at the end of the equilibration period. Mean ${\pm}$ SD values for the $MAC_{ISO}B$ and $MAC_{ISO}T$ were $1.33{\pm}0.04%$ and $1.23{\pm}0.04%$, respectively. The $MAC_{ISO}B$ decreased significantly by $7.5{\pm}0.2%$ (P < 0.05) after administration of tramadol. The mean heart rate and arterial blood pressure of six dogs were not changed significantly after tramadol administration. The blood gas levels remained constant during the study. In conclusion, tramadol could significantly reduce $MAC_{ISO}$ without depression of cardiorespiratory function. Thus, the use of tramadol on inhalation anesthesia with isoflurane in dogs can improve the stability of anesthesia and the quality of recovery.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.17 no.10
• /
• pp.331-337
• /
• 2016

Several foundation soil conditions below a homogeneous sand slope were assumed and slope stability analyses were conducted to determine the soil condition, in which a stabilizing pile can be used to increase the factor of safety against sliding. The assumed heights of the sand slope were 5m and 10m. For a 5m slope height, a stabilizing pile can be used in the foundation soil with a $15^{\circ}$ internal friction angle and a cohesion of 10kPa. For a 10m slope height, a stabilizing pile can be used in the foundation soil with a $20^{\circ}$ internal friction angle and a cohesion of 10kPa and a stabilizing pile can be used in the foundation soil with a $0^{\circ}$ internal friction angle and 40kPa, 45kPa and 50kPa of cohesion. According to the analysis results of stabilizing pile-reinforced foundation soil, the length of the stabilizing pile and magnitude of the maximum bending moment were strongly affected by the internal friction angle of the foundation soil. The lengths of stabilizing pile, for an internal friction angle of $0^{\circ}$ were 4.6, 8.0 times greater than those with an internal friction angle of $5^{\circ}$. The magnitude of the maximum bending moment of the stabilizing pile for an internal friction angle of $0^{\circ}$ was 24.6 times greater than that for an internal friction angle of $5^{\circ}$. Practically, a stabilizing pile cannot be used for foundation soil with an internal friction angle of $0^{\circ}$. Considering the results derived from this study, the effects of a stabilizing pile can be maximized for soft foundation soil that is embanked with a slow construction speed.

• The Journal of Korean Academy of Prosthodontics
• /
• v.59 no.4
• /
• pp.395-404
• /
• 2021

Purpose. The purpose of present study was to evaluate the effect of changing structural stability of wax disc on the fit of prosthesis when the milling proceeded in order. Materials and methods. Prepared maxillary left first molar was used to fabricate a Ni-Cr alloy reference model. This was scanned to design crown and then wax pattern was milled, invested and cast to fabricate prosthesis. The wax patterns located in a row centrally within a single wax disc were set into a total of five groups ranging from WM1 group that was first milled to WM5 group that was last milled and the number of each group was set as 10. Silicone replica technique was used to measure the marginal gap, axial internal gap, line angle internal gap, occlusal internal gap. Data was evaluated with one-way ANOVA with significance level set at α = .05 and then Tukey HSD test was conducted for post analysis. Results. Marginal gap measured in each group, it was 40.41 ± 2.15 ㎛ in WM1 group, 40.44 ± 2.23 ㎛ in WM2 group, 39.96 ± 2.25 ㎛ in WM3 group, 39.96 ± 2.48 ㎛ in WM4 group, and 40.57 ± 2.53 ㎛ in WM5 group. No significant difference was found between groups. The significant difference between the groups was also not found in the axial internal gap, line angle internal gap, and occlusal internal gap. Conclusion. Internal and marginal fit of single crown to the sequential order of milling processing in the single machinable wax disc did not seem to be affected by the sequence.

• Journal of the Korean Applied Science and Technology
• /
• v.38 no.6
• /
• pp.1687-1698
• /
• 2021

This study is to produce multiple layers of liposomes in a supercritical state and encapsulates active ingredients in order to stably encapsulate thermodynamically unstable active ingredients. In order to form a liposome in a supercritical state, a mixed surfactant development including vegetable-derived hydrogenated phosphatidyl choline and their delivative, hydrogenated sucrose distearate was synthesized as high purity. It describes a manufacturing method of injecting liquid carbon dioxide into a reactor to create a supercritical state and stirring to produce a giant liposome, and adding and loading genistein and quercetin. The HLB of the mixed lipid complex (SC-Lipid Complex) was 12.50, and multiple layers of liposome vesicles were formed even at very low concentrations. This surfactant had a specific odor with a pale yellow flake, the specific gravity was 0.972, and the acid value was 0.12, indicating that it was synthesized with high purity. As a result of the emulsifying capacity experiment using 20 wt% capric/capric triglyceride and triethylhexanoin using SC-Lipid Complex, it was found to have 96.2% emulsifying power. SC LIPOSOME GENISTEIN was confirmed that a multi-layer liposome vesicle was formed through a transmission electron microscope (Cryo-TEM) for the supercritical liposome encapsulated with genistein. The primary liposome particle size in which genistein was encapsulated was 253.9 nm, and the secondary capsule size was 18.2 ㎛. Using genistein as the standard substance, the encapsulation efficiency of supercritical liposomes was 99.5%, and general liposomes were found to have an efficiency of 93.6%. In addition, the antioxidant activity experiment in which quercetin was sealed was confirmed by the DPPH method, and it was found that the supercritical liposome significantly maintained excellent antioxidant activity. In this study, thermodynamically unstable raw materials were sealed into liposomes without organic solvents in a supercritical state. Based on these results, it is expected that it can be applied to various forms such as highly functional skincare cosmetics, makeup cosmetics, and scalp protection cosmetics.

• Journal of vocational education research
• /
• v.37 no.5
• /
• pp.25-53
• /
• 2018

The purpose of this study is to find out the improvement plan through the satisfaction survey of the trainees involved in vocational training fraud preventive education. In order to do this, we conducted a satisfaction survey(4,263 persons) of 5,939 people who participated in the prevention education conducted by group education or e-learning in 2017. Finally we collected 4,237 effective responses data. Descriptive statistics and the regression analysis were conducted. The finding of the study were as follows. First, the education service quality(4.42), satisfaction level(4.44), understanding level(4.44) and help level(4.45) were significantly higher than those of participants in the preventive education 4 and above. Second, e-learning participants' perceived level of education service quality, satisfaction, comprehension, and help was higher in all variables than collective education's. Third, all of the sub-factors of preventive education service quality influenced satisfaction, understanding, and help in collective education and e-learning, respectively. In the collective education, the contents of education had the greatest influence, and in e-learning, the data composition had the greatest influence. Fourth, desirable education contents were cases of fraud training(70.7%), disposition regulations(47.9%), NCS course operation instructions(32.8%) and training management best practices(32.4%). Additional requirements also included the establishment of an in-depth course, the provision of anti-fraud education content for trainees, and screen switching and system stability that can be focused on e-learning. Therefore, this study suggests that first, it is necessary to activate e-learning for prevention education more, reflecting satisfaction of e-learning is higher than that of collective education. Second, it is necessary to diversify the content of preventive education and to provide it more abundantly, because it has the biggest influence in common with the satisfaction, understanding and help level of the preventive education. Third, education content next, the factors that have a relatively big influence on satisfaction are shown as delivery method and education place in the collective education. Therefore, it is necessary to prepare education place considering the assignment of instructor and convenience. Fourth, constructing data next, the factor that have a relatively great influence on understanding and help are found to be operator support, and more active operator support activities are required in e-learning. Fifth, it is required to delivery prevention activity for trainees participating in vocational training. Sixth, it is necessary to analyze the educational need to construct the contents of preventive education more systematically.

• Korean Journal of Environment and Ecology
• /
• v.32 no.6
• /
• pp.603-617
• /
• 2018

This study surveyed the diversity and community characteristics of benthic macroinvertebrates and freshwater fish, which are the main animal classifications in a hydro ecosystem, from May to September 2017 in the western plains of the Demilitarized Zone (DMZ). The results showed a total of 125 species of benthic macroinvertebrates belonging to 66 families, 19 orders, and four phyla in the streams and wetlands. Among benthic macroinvertebrates, Coleoptera (27 spp.: 21.60%) was the largest group in terms of species richness followed by Odonata (26 spp.: 20.80%), non-Insecta (22 spp.: 17.60%), and Hemiptera (11 spp.: 8.80%) occupying in the lentic area. Of the feeding function groups (FFGs), predators (51 spp.: 56.67%) showed a relatively larger presence, indicating the dominance of hygrophilous invertebrates that usually inhabit the freshwater wetlands or ponds. Of the habitat oriented groups (HOGs), climbers (33 spp.: 24.44%) and burrowers (17 spp.: 12.59%) were the dominant groups. This observation is typical in a slow flowing habitat and can lead to the disturbance of the ecosystem due to cannibalism among predators. Cannibalism can be caused by stress induced by various population and environmental factors. For the ecosystem services benchmark (ESB) value, site 13 appeared to be the highest with 82 marks while other sites showed relatively lower rates and indices (III water quality class with ${\alpha}$-mesosaprobic). The analysis result of stability factors showed that almost all sites were evaluated to be the I characteristic group with high resilience and resistance or the III characteristic group that was sensitive to environmental disturbance and formed uneven and unstable communities. Of the freshwater fishes, 46 species (3,405 individuals) belonging to 39 families and 18 orders were identified in all the investigated sites. Among them, Cyprinidae (30 spp.: 65.2%) was the largest group, and Zacco koreanus was identified as the dominant species (728 individuals, 21.4%). The survey of freshwater fish communities found both stable communities (sites 7 and 13) with low dominant index (0.39) and high diversity index (2.29) and unstable communities (sites 2, 3, 8, and 10) in opposite tendency. This survey found five Korean endemic species, 17 species belonging to the export controlled species, two endangered species level II (Lethocerus deyrollei and Cybister chinensis), and rare species (Dytiscus marginalis czerskii) among benthic macroinvertebrates. The survey also found an invasive species, Ampullarius insularus, which was distributed throughout the whole area and thus can continuously disturb the ecosystem in the western plain area in the DMZ. Of freshwater fish, one natural monument (Hemibarbus mylodon) and three endangered species level II (Acheilognathus signifer, Gobiobotia macrocephalus, and G. brevibarba) were observed. The survey also found four introduced species (Pomacea canaliculate, Carassius cuvieri, Lepomis macrochirus, Micropterus salmoides) in the western DMZ area, indicating the need for the protection and conservation measures.

• Journal of Ecology and Environment
• /
• v.42 no.4
• /
• pp.210-218
• /
• 2018

Background: Soil respiration (Rs) is a major factor of the absorption and accumulation of carbon through photosynthesis in the ecosystem carbon cycle. This directly affects the amount of net ecosystem productivity, which affects the stability and sustainability of the ecosystem. Understanding the characteristics of Rs is indispensable to scientifically understand the carbon cycle of ecosystems. It is very important to study Rs characteristics through analysis of environmental factors closely related to Rs. Rs is affected by various environmental factors, such as temperature, precipitation, soil moisture, litter supply, organic matter content, dominant plant species, and soil disturbance. This study was conducted to analyze the effects of micro-topographical differences on Rs in forest vegetation by measuring the Rs on the ridge and southern slope sites of the broadly established Quercus mongolica forest in the central Korean area. Method: Rs, Ts, and soil moisture data were collected at the southern slope and ridge of the Q. mongolica forest in the Mt. Jeombong area in order to investigate the effects of topographical differences on Rs. Rs was collected by the closed chamber method, and data collection was performed from May 2011 to October 2013, except Winter seasons from November to April or May. For collecting the raw data of Rs in the field, acrylic collars were placed at the ridge and southern slope of the forest. The accumulated surface litter and the soil organic matter content (SOMC) were measured to a 5 cm depth. Based on these data, the Rs characteristics of the slope and ridge were analyzed. Results: Rs showed a distinct seasonal variation pattern in both the ridge and southern slope sites. In addition, Rs showed a distinct seasonal variation with high and low Ts changes. The average Rs measurements for the two sites, except for the Winter periods that were not measured, were $550.1\;mg\;CO_2m^{-2}h^{-1}$ at the ridge site and $289.4\;mg\;CO_2m^{-2}h^{-1}$ at the southern slope, a difference of 52.6%. There was no significant difference in the Rs difference between slopes except for the first half of 2013, and both sites showed a tendency to increase exponentially as Ts increased. In addition, although the correlation is low, the difference in Rs between sites tended to increase as Ts increased. SMC showed a large fluctuation at the southern slope site relative to the ridge site, as while it was very low in 2013, it was high in 2011 and 2012. The accumulated litter of the soil surface and the SOMC at the depth range of 0~5 cm were $874g\;m^{-2}$ and 23.3% at the ridge site, and $396g\;m^{-2}$ and 19.9% at the southern slope site. Conclusions: In this study, Rs was measured for the ridge and southern slope sites, which have two different results where the surface litter layer is disturbed by strong winds. The southern slope site shows that the litter layer formed in autumn due to strong winds almost disappeared, and while in the ridge site, it became thick due to the transfer of litter from the southern slope site. The mean Rs was about two times higher in the ridge site compared to that in the southern slope site. The Rs difference seems to be due to the difference in the amount of litter accumulated on the soil surface. As a result, the litter layer supplied to the soil surface is disturbed due to the micro-topographical difference, as the slope and the change of the community structure due to the plant season cause heterogeneity of the litter layer development, which in turn affects SMC and Rs. Therefore, it is necessary to introduce and understand these micro-topographical features and mechanisms when quantifying and analyzing the Rs of an ecosystem.

• Korean Journal of Heritage: History & Science
• /
• v.51 no.1
• /
• pp.4-31
• /
• 2018

The Neolithic pottery excavated from the Jungsandong site has been classified into four types of pottery (I: feldspar type, II: mica type, III: talc type and IV: asbestos type) according to their mineral composition. These four types of potteries generally appear to have undergone incomplete firing, while the level of oxidation in the type I pottery objects, which have a relatively higher clay content, was found to be particularly low. The type III objects, which have a high talc content, are judged to have been somewhat slow in removing carbon because they contain saponite belonging to the smectite group. Of the four types of pottery, type IV showed the highest redness and the most uniform characteristics, thus indicating a good level of oxidation. In particular, fixed carbide (C; 33.7 wt.%) with a thickness of about 1mm, and originating from organic substances, was detected inside the walls of the type I pottery, while the deep radial cracks in the outer surfaces of the pottery are thought to have been caused by repeated thermal shocks. Given that all of the pottery except for the type I artifacts are considered to be have been made for storage purposes, those containing talc and tremolite are easy to done liquid storing vessels based on an analysis of their material characteristics. As for the type II relics, which are composed of various minerals and exhibit poor physical properties, they seem to have been used for simple storage purposes. As domestic talc and asbestos mines were concentrated in the areas of Gyeonggi, Gangwon, Chungbuk, and Chungnam, it seems likely that talc and tremolite were produced as contiguous minerals. Considering the distance between the remains in Jungsandong and these mines and their geographical distribution, there is a possibility - albeit somewhat slight - that these mines were developed for the mining of various minerals. Although ultramafic rock masses - such as serpentine capable of generating talc and tremolite - have not been found in the Jungsandong area, limestone and biotite granite containing mica schist have been identified in the northwestern part of Yeongjong Island, indicating that small rock masses might have formed there in the past. Therefore, it is judged necessary to accumulate data on pottery containing talc and tremolite, other than the remains in Jungsandong, and to investigate the rocks and soils in the surrounding area with greater precision. The firing temperatures of the pottery found at the Jungsandong site were interpreted by analyzing the stability ranges of the mineral composition of each type. As a result, they have been estimated to range from 550 to $800^{\circ}C$ for the type I artifacts, and from 550 to $700^{\circ}C$ for the type I, II and IV artifacts. However, these temperatures are not the only factors to have affected their physical properties and firing temperature, and the types, particle sizes, and firing time of the clay should all be taken into consideration.

• The Journal of the Korea Contents Association
• /
• v.19 no.2
• /
• pp.477-490
• /
• 2019

This study analyzes the process of overcoming prejudice and discrimination experiences of mothers with disabilities and looks for improvement points. It is interviewed 9 mothers of children with disabilities who were experiencing prejudice and discrimination while raising children with disabilities. The data collection was conducted from October to November, 2018 and one by on one in depth interview by using semi - structured questionnaires. Data analysis was done through consensual qualitative research (CQR). The result of CQR while it is a experiencing the process of prejudice and discrimination as well as coping the raising disabled children. 'Prejudice and discrimination experience of mothers with disabilities' and 'overcoming of discrimination experiences of mothers with disabilities' were derived. And the seven sub-regions, 28 categories, were finally constructed. The results of the study are as follows. Firstly, Prejudice and discrimination experiences of mothers with disabilities in raising children with disabilities are view of looking at children with disabilities comparing to those of normal children and children with disabilities. It seems that they want to treat the disabled child as the general child with an attitude of understanding and accepting the disabled child rather than looking at the disabled child with wrong perception, prejudice, stereotypes and rejection. Secondly, The process of overcoming the discrimination experiences of the mother of the disabled child is strengthening the cohesion and cohesion within the family in the process of accepting and coping with the disability family of the child with disabilities even if they raise the child with disability and have difficulties such as recognition bias and discrimination of the general public. Based on the results of this study, we suggested practical and policy implications for the mother's psychological stability of the child with disability and the disabled child's healthy life.

• The Journal of Korean Society for Radiation Therapy
• /
• v.31 no.1
• /
• pp.17-24
• /
• 2019

Purpose: The present study aims to assess the level of coherency and the accuracy of Point dose of the Isocenter of VERO, a linear accelerator developed for the purpose of the Stereotactic Body Radiation Therapy(SBRT). Materials and Method: The study was conducted randomly with 10 treatment plans among SBRT patients in Kyungpook National University Chilgok Hospital, using VERO, a linear accelerator between June and December, 2018. In order to assess the equipment's power stability level, we measured the output constancy by using PTW-LinaCheck, an output detector. We also attempted to measure the level of accuracy of the equipment's Laser, kV(Kilo Voltage) imaging System, and MV(Mega Voltage) Beam by using Tofu Phantom(BrainLab, Germany) to assess the accuracy level of geometrical Isocenter. We conducted a comparative analysis to assess the accuracy level of the dose by using an acrylic Phantom($30{\times}30{\times}20cm$), a calibrated ion chamber CC-01(IBA Dosimetry), and an Electrometer(IBA, Dosimetry). Results: The output uniformity of VERO was calculated to be 0.66 %. As for geometrical Isocenter accuracy, we analyzed the error values of ball Isocenter of inner Phantom, and the results showed a maximum of 0.4 mm, a minimum of 0.0 mm, and an average of 0.28 mm on X-axis, and a maximum of -0.4 mm, a minimum of 0.0 mm, and an average of -0.24 mm on Y-axis. A comparison and evaluation of the treatment plan dose with the actual measured dose resulted in a maximum of 0.97 % and a minimum of 0.08 %. Conclusion: The equipment's average output dose was calculated to be 0.66 %, meeting the ${\pm}3%$ tolerance, which was considered as a much uniform fashion. As for the accuracy assessment of the geometric Isocenter, the results met the recommended criteria of ${\pm}1mm$ tolerance, affirming a high level of reproducibility of the patient's posture. The difference between the treatment plan dose and the actual measurement dose was calculated to be 0.52 % on average, significantly less than the 3 % tolerance, confirming that it obtained predicted does. The current study suggested that VERO equipment is suitable for SBRT, and would result in notable therapeutic effect.