• 한국막학회:학술대회논문집
• /
• 한국막학회 1999년도 춘계 총회 및 학술발표회
• /
• pp.42-44
• /
• 1999

• Bulletin of the Korean Chemical Society
• /
• 제15권5호
• /
• pp.335-337
• /
• 1994

• Bulletin of the Korean Chemical Society
• /
• 제7권3호
• /
• pp.204-210
• /
• 1986

It is shown that the linear stability coincides with the thermodynamic stability in the case of stress tensor evolution for simple dense fluids even if the constitutive (evolution) equation for the stress tensor is nolinear. The domain of coincidence can be defined in the space of parameters appearing in the constitutive equation and we find the domain is confined in an elliptical cone in a three-dimensional parameter space. The corresponding state theory in rheology of simple dense fluids is also further examined. The validity of the idea is strengthened by the examination.

• 한국지능시스템학회:학술대회논문집
• /
• 한국퍼지및지능시스템학회 1998년도 The Third Asian Fuzzy Systems Symposium
• /
• pp.331-336
• /
• 1998

A systematic design method for PDC(Parallel Distributed Compensation)-type continuous time Takagi-Sugeno(T-S in short) fuzzy control systems which have inaccessible states is developed in this paper. Reduced-dimensional fuzzy state estimator is introduced from existing T-S fuzzy model using the PDC structure of Wang et al. [1] LMI(Linear Matrix Inequalities) problems which represent the stabililty of the reduced-dimensional fuzzy state estimator are derived. Pole placement constraints idea for each rules is adopted to determine the estimator gains and they are also revealed as LMI problems. these LMI problems are combined with Joh et al's [7][8] LMI problems for PDC -type continuous time T-S fuzzy controller design to yield a systematic design method for PDC -type continuous time T-S fuzzy control systems which have inaccessible states.

• 한국통신학회논문지
• /
• 제18권5호
• /
• pp.739-745
• /
• 1993

이동통신 기기에서 온도에 대해서 고안정의 주파수 합성기를 구현함은 중요하다. 그런데, 고안정의 주파수 합성기를 구현하기 위해서는 기준 주파수를 제공하는 발진기가 온도에 대해서 안정해야만 한다. 본 논문에서는 이러한 필요성에 따라서 디지털 방식을 이용한 TCXO가 구현된다. DTCXO는 온도 감지부, 제어부, VCXO로 나뉜다. 구현된 DTCXO의 주파수 안정도는 평균 0.94ppm이다. 이는 아나로그 방식을 이용한 TCXO의 안정도인 2.5ppm과 비교해볼 때, 향상된 결과이다.

• 한국해양공학회:학술대회논문집
• /
• 한국해양공학회 2004년도 학술대회지
• /
• pp.120-126
• /
• 2004

The failure modes analysis by the real process method at the head section of rubble mound breakwaters is more important than other failure modes analysis. because this initial failure modes and failure process will lead to the destruction of the structure. The three-dimensional failure modes are discussed using the experimental data with directional waves considering the failure modes. It was processed step by step failure around the head of rubble mound breakwaters. The spacial characteristics of failure mode by real process analysis was well descript at the rubble mound structures.

• 한국해양공학회:학술대회논문집
• /
• 한국해양공학회 2004년도 학술대회지
• /
• pp.303-308
• /
• 2004

The failure at the head section of rubble mound breakwaters is more important than other failure modes. because this initial failures will occur the failure of the trunk section and lead to the instability of the structure. The three-dimensional failure modes are discussed using the experimental data with multi-directional waves considering the failure modes. It was occurred by the topographical characteristics around the head of rubble mound breakwater. The spacial characteristics of failure mode around the rubble-mound structures can be summarized as follows: 1) It was clarified that the failure modes at the round head of a detached breakwater are classified as failure by plunging breaker on the slope, failure by direct incident wave force and failure at the rubble mound breakwaters. 2) The failure mode was found in the lower wave height than the design wave by the breaker depth effects and topography around structures. It is clarified that the structure was monitored safely designed for the design wave but the failure was occurred by the reason of breaker waves.

• 한국해양공학회:학술대회논문집
• /
• 한국해양공학회 2001년도 추계학술대회 논문집
• /
• pp.144-149
• /
• 2001

The failure at the head section of rubble-mound detached breakwaters is more important than other failure modes. because this initial failures will occur the failure of the trunk section and lead to the instability of the structure. The three-dimensional failure modes are discussed using the experimental data with multi-directional waves considering the failure modes occurring around the head of the rubble-mound detached breakwater. The spacial characteristics of failure mode around the rubble-mound structures can be summarized as follows: 1) It was clarified that the failure modes at the round head of a detached breakwater are classified as failure by plunging breaker on the slope, failure by direct incident wave force and failure by scouring at the toe of the detached breakwater. 2) The failure mode was found in the lower wave height than the design wave by the breaker depth effects. It is clarified that the structure monitored was safely designed for the design wave but the failure was occurred by the reason of breaker waves and scouring processes at the toe 3) It was observed that scouring at the toe developed in the region where steady stream due to vorticity was generated and the spatial variation of scour at the toe of the round head was predominated by incident wave direction.

• 한국수산과학회지
• /
• 제34권6호
• /
• pp.713-719
• /
• 2001

본 연구에서는 입사파의 방향성효과에 의한 방파제 제두부의 파괴모드 중 파력에 의한 사면상의 피복석 (블럭)의 파괴와 기초부 세굴에 의한 파괴의 특성을 시$\cdot$공간적으로 해석하였다. 본 연 구의 각 단계별로 얻어진 중요한 결과를 정리하면 아래와 같다. 안정성에 미치는 외력인자로서 생각되는 surf similarity parameter ${\xi}_{1/3}$와 상대파고 $H_{1/3}/h_t$,를 변화시켜 방파제 제두부에서 얻어진 파괴율 $1\%$ 이하의 초기파괴한계와 $N_{s1/3}-{\xi}_{1/3}$의 초기파괴한계로부터 직각 입사하는 경우가 피해를 많이 받는 전형적인 결과를 얻었다. 사면상의 쇄파는 제두부의 안정성에 가장 큰 영향을 주었으며, 쇄파는 유속장과 더불어 제두부 중앙부 사면상의 피복석을 파괴하는 주된 외력인자인 것으로 확인되었다. 제두부의 파괴을은 전면영역에서 중복파영역의 영향을 많이 받고, 배후면에서 파고의 영향을 많이 받았다. 기초부 세굴에 의한 파괴는 장시간의 정상흐름에 의해 일어났다. 기초부 세굴은 파랑에 의해 발달된 전면의정상파 영역의 수평류가 강한 절점 부근과 제두부에서 발생하는 정상와동류의 흐름이 강한 곳에서 발달하였다 이는 입사방향에 따라 변하며, 정상와동류의 세굴이 구조물을 연행하여 일어나는 것을 세굴깊이의 시간적 변동특성으로부터 알 수 있었다.