• 제목/요약/키워드: St$\ddot{o}$ber Process

검색결과 9건 처리시간 0.023초

실리카 나노 입자의 크기에 따른 청색 형광 특성 연구 (A Study on the Blue Fluorescence Characteristics of Silica Nanoparticles with Different Particle Size)

  • 윤지희;김기출
    • 한국산학기술학회논문지
    • /
    • 제20권5호
    • /
    • pp.1-6
    • /
    • 2019
  • 유기 염료가 도핑 된 실리카 나노입자는 바이오 라벨링, 바이오 이미징 및 바이오 센싱에 사용되고 있는 유망한 나노소재이다. 일반적으로 형광 실리카 나노입자는 수정된 스토버 방법($St{\ddot{o}}ber$ Method)으로 합성된다. 본 연구에서는 다양한 크기를 갖는 염료가 첨가되지 않은 형광 실리카 나노입자를 수정된 스토버 합성법인 졸겔 공정으로 합성하였다. 졸겔 공정 중에 기능성 물질인 APTES를 첨가제로 첨가하였다. 졸겔 공정으로 합성된 실리카 나노입자는 $400^{\circ}C$에서 2시간 동안 하소되었다. 합성된 실리카 나노입자의 표면형상과 크기를 전계방출 주사전자현미경으로 조사하였고, 합성된 실리카 나노입자의 형광 특성은 파장 365 nm의 자외선 램프를 조사하여 확인하였다. 또한 합성된 실리카 나노입자의 광발광 (PL) 특성을 형광 분석 형광법으로 조사하였다. 그 결과 합성된 실리카 나노입자는 입자의 크기와 무관하게 모두 청색 형광 특성을 갖는 것으로 확인되었다. 특히, 실리카 나노입자의 크기가 증가할수록 PL 강도는 감소하였다. 염료가 첨가되지 않은 실리카 나노입자의 청색 형광 특성은 APTES 층의 $NH_2$ 기능기와 실리카 매트릭스 뼈대 내부의 산소관련 결함과의 결합에 기인하는 것으로 추정된다.

실리카 분말이 코팅된 수처리용 규조토계 세라믹 필터의 특성평가 (Characterization of the Silica Coated Diatomite Based Ceramic Filter for Water Treatment)

  • 배병서;하장훈;송인혁;한유동
    • 한국분말재료학회지
    • /
    • 제21권1호
    • /
    • pp.21-27
    • /
    • 2014
  • In this study, diatomite based materials were investigated as a support filter for silica particle coating. The silica sol for coating was synthesized by a st$\ddot{o}$ber process. The diatomite support was dry-pressed at 10 MPa and sintered at $1200^{\circ}C$ for 1 hour. The coating sol was prepared as a mixture of EtOH and silica sol. The diatomite support was coated by a dip-coating process. Silica coated diatomite filter was sintered at $1000{\sim}1200^{\circ}C$ for 1 hour. The largest pore size was decreased with increasing concentration ratio of coating sol. The gas and water permeability of silica coated diatomite decreased with increasing of concentration ratio of the coating sol.

선거범에 대한 자격제한과 형벌개별화원칙 (Der Verlust der Amtsfähigkeit bzw. des Wahlrechts und das Gebot der Individualisierung der Strafen)

  • 정광현
    • 법제연구
    • /
    • 제53호
    • /
    • pp.337-374
    • /
    • 2017
  • 선거범죄로 100만 원 이상의 벌금이 선고된 자는 공직선거법 제18조제1항 제3호, 제19조 제1호, 제266조에 의해 5년간 공직에 취임할 자격과공직선거에 관한 권리를 상실한다. 만약 선거범죄로 징역형을 선고받는다면, 그 기간은 10년으로 늘어난다. 이러한 불이익은 법률에 의해 발생한다. 다시 말해, 그러한 상실 여부와 기간은 법원의 재량에 들지 않는다. 하지만 이와 관련해서 간과해서는 안 될 것은, 그러한 공직취임자격 및피선거권 박탈 등은 범죄를 제재하기 위한 것으로서, 그 자체가 본질적으로 형벌의 일종에 해당한다는 사실이다. 즉, 형법 제41조에 규정된 형의종류에는, 전술한 공적인 법적지위에 대한 일시적인 부인이 포함되어 있다. 형법 제41조에서 규정하고 있는 명예형과 같은 목적 같은 법적 효과를 가진 공직선거법 제18조 제1항 제3호, 제19조 제1호, 제266조에 따른제재의 본질을 형벌로 파악하면 안 될 이유를 알 수 없다. 전술한 제재가 일종의 명예형이라고 할 때, 범행과 범죄자의 특성에 따라 그 제재를 개별화해야 한다는 요청이 제기된다. 형벌개별화원칙은 주로 실질적 법치국가원리에서 도출할 수 있는바, 기본적으로 법원이 각 개별 사건의 구체적인 사정을 고려하는 가운데 적절한 형벌을 정할 권한이있을 때에만 실현될 수 있다. 따라서 법률에 의해 발효하는 자격제한은형벌개별화원칙와 합치하기 어렵다. 그러므로 입법자는 그처럼 법률에 의해 자동적으로 공직취임자격 및선거권을 박탈하는 것 대신에 법원이 임의로 그 자격을 정지하게 하는방안을 내용으로 하는 개혁안을 모색해 봄이 바람직할 것이다.

The Distance-Dependent Fluorescence Enhancement Phenomena in Uniform Size Ag@SiO2@SiO2(dye) Nanocomposites

  • Arifin, Eric;Lee, Jin-Kyu
    • Bulletin of the Korean Chemical Society
    • /
    • 제34권2호
    • /
    • pp.539-544
    • /
    • 2013
  • $Ag@SiO_2@SiO_2$(FITC) nanocomposites were prepared by the simple polyol process and St$\ddot{o}$ber method. Fluorescence enhancement of fluorescein moiety (fluorescein isothiocyanate, FITC) was investigated in the presence of silver nanoparticles in $Ag@SiO_2@SiO_2$(FITC) system with varying thickness (X nm) of first silica shell. Maximum enhancement factor of 4.3 fold was achieved in $Ag@SiO_2@SiO_2$(FITC) structure with the first silica shell thickness of 8 nm and the average separation distance of 11 nm between the surface of silver nanoparticle and fluorescein moiety. The enhancement is believed to be originated from increased excitation rate of fluorescein moiety due to concentrated local electromagnetic field which was improved by interaction of light with silver nanoparticles.

SYNTHESIS OF SILICA-COATED Au WITH Ag, Co, Cu, AND Ir BIMETALLIC RADIOISOTOPE NANOPARTICLE RADIOTRACERS

  • Jung, Jin-Hyuck;Jung, Sung-Hee;Kim, Sang-Ho;Choi, Seong-Ho
    • Nuclear Engineering and Technology
    • /
    • 제44권8호
    • /
    • pp.971-976
    • /
    • 2012
  • Silica-coated Au with Ag, Co, Cu, and Ir bimetallic radioisotope nanoparticles were synthesized by neutron irradiation, after coating $SiO_2$ onto the bimetallic particles by the sol-gel St$\ddot{o}$ber process. Bimetallic nanoparticles were synthesized by irradiating aqueous bimetallic ions at room temperature. Their shell and core diameters were recorded by TEM to be 100 - 112 nm and 20 - 50 nm, respectively. The bimetallic radioisotope nanoparticles' gamma spectra showed that they each contained two gamma-emitting nuclides. The nanoparticles could be used as radiotracers in petrochemical and refinery processes that involve temperatures that would decompose conventional organic radioactive labels.

Preparation of silica-coated gadolinium compound particle colloid solution and its application in imaging

  • Kobayashi, Yoshio;Morimoto, Hikaru;Nakagawa, Tomohiko;Gonda, Kohsuke;Ohuchi, Noriaki
    • Advances in nano research
    • /
    • 제1권3호
    • /
    • pp.159-169
    • /
    • 2013
  • A preparation method for gadolinium compound (GdC) nanoparticles coated with silica ($GdC/SiO_2$) is proposed. GdC nanoparticles were prepared with a homogeneous precipitation method at $80^{\circ}C$ using $1.0{\times}10^{-3}$ M $Gd(NO_3)_3$, 0.5 M urea and $0-3.0{\times}10^{-4}$ M ethylenediarinnetetraacetic acid disodium salt dihydrate (ETDA) in water. As a result of preparation at various EDTA concentrations, GdC nanoparticles with a size as small as $40.5{\pm}6.2$ nm, which were colloidally stable, were prepared at an EDTA concentration of $2.0{\times}10^{-4}$ M. Silica-coating of the GdC nanoparticles was performed by a St$\ddot{o}$ber method at $35^{\circ}C$ using $1.0-10.0{\times}10^{-3}$ M tetraethylorthosilicate (TEOS), 11 M $H_2O$ and $1.5{\times}10^{-3}$ M NaOH in ethanol in the presence of $1.0{\times}10^{-3}$ M GdC nanoparticles. Performance of preparation at various TEOS concentrations resulted in production of $GdC/SiO_2$ particles with an average size of $106.1{\pm}11.2$ nm at a TEOS concentration of $5.0{\times}10^{-3}$ M. The gadolinium (Gd) concentration of $1.0{\times}10^{-3}$ M in the as-prepared $GdC/SiO_2$ particle colloid solution was increased up to a Gd concentration of 0.2 M by concentrating with centrifugation. The core-shell structure of $GdC/SiO_2$ particles was undamaged, and the colloid solution was still colloidally stable, even after the concentrating process. The concentrated $GdC/SiO_2$ colloid solution showed images of X-ray and magnetic resonance with contrast as high as commercial Gd complex contrast agents.

Synthesis of Size Controlled Spherical Silica Nanoparticles via Sol-Gel Process within Hydrophilic Solvent

  • Kim, Tae Gyun;An, Gye Seok;Han, Jin Soon;Hur, Jae Uk;Park, Bong Geun;Choi, Sung-Churl
    • 한국세라믹학회지
    • /
    • 제54권1호
    • /
    • pp.49-54
    • /
    • 2017
  • In this study, based on hydrolysis and condensation via $St{\ddot{o}}ber$ process of sol-gel method, synthesis of mono-dispersed silica nanoparticles was carried out with hydrophilic solvent. This operation was expected to be a more simplified process than that with organic solvent. Based on the sol-gel method, which involves simply controlling the particle size, the particle size of the synthesized silica specimens were ranged from 30 to 300 nm by controlling the composition of tetraethylorthosilicate (TEOS), DI water and ammonia solution, and by varying the stirring speeds while maintaining a fixed amount of ethanol. Increasing the content of DI water and decreasing the content of ammonia caused the particle size to decrease, while controlling the stirring speed at a high level of RPMs enabled a decrease of the particle size. X-ray diffraction (XRD) and Fourier transform infrared spectroscopy (FT-IR) were utilized to investigate the success factors for synthesizing process; Field emission scanning electron microscopy (FE-SEM) was used to study the effects of the size and morphology of the synthesized particles. To analyze the dispersion properties, zeta potential and particle size distribution (PSD) analyses were utilized.

기판 표면 기능화에 의한 실리카 나노입자의 선택적 패턴 성장 (Selective Pattern Growth of Silica Nanoparticles by Surface Functionalization of Substrates)

  • 김기출
    • 한국산학기술학회논문지
    • /
    • 제21권4호
    • /
    • pp.20-25
    • /
    • 2020
  • 나노과학과 나노기술의 발전에 따라 선택적 패턴 성장을 위한 기술이 주목을 받고 있다. 실리카(Silica) 나노입자는 바이오 라벨링, 바이오 이미징 및 바이오 센싱에 사용되고 있는 유망한 나노소재이다. 본 연구에서는 실리카 나노입자를 수정된 스토버 방법(Stöber Method)인 졸겔(Sol-Gel) 공정으로 합성하였다. 또한 기판의 표면을 미세접촉프린팅 기술로 발수 처리하여 실리카 나노입자를 선택적으로 패턴 성장시켰다. 합성된 실리카 나노입자의 크기와 선택적으로 패턴 성장된 실리카 나노입자의 표면형상을 전계방출 주사전자현미경(Field Emission Scanning Electron Microscopy, FE-SEM)으로 조사하였고, 기판의 표면 기능화에 따른 기판의 접촉각 특성을 조사하였다. 그 결과 OTS 용액으로 발수 처리된 기판에서는 실리카 나노입자를 스핀 코팅하였을 때, 실리카 나노입자를 관찰할 수 없었으나, KOH 용액으로 친수 처리된 기판에서는 실리카 나노입자가 잘 코팅되는 것을 확인하였다. 또한 미세접촉프린팅 기술로 발수 처리한 기판영역 외에서만 실리카 나노입자가 선택적으로 패턴 성장하는 것을 FE-SEM으로 확인하였다. 이러한 실리카 나노입자의 패턴성장 특성을 염료가 도핑 된 실리카 나노입자에 적용한다면, 실리카 나노입자의 패턴 성장 기술은 바이오 이미징 및 바이오 센싱 분야에 유용하게 활용될 것으로 기대된다.

고분자 박막 내에 담지 된 실리카 마이크로입자의 광산란 효과에 의한 광에너지 상향전환 효율 향상 (Light Scattering-enhanced Upconversion Efficiency in Silica Microparticles-embedded Polymeric Thin Film)

  • 최현석;이학래;이명수;박정민;김재혁
    • 공업화학
    • /
    • 제30권1호
    • /
    • pp.88-94
    • /
    • 2019
  • 삼중항-삼중항 소멸에 의한 광에너지 상향전환 기술(triplet-triplet annihilation upconversion, TTA-UC)은 특정 조건을 만족시키는 유기물들의 에너지 전달 및 융합 과정에 의해 저에너지의 광자를 고에너지의 광자로 변환시키는 신개념 에너지 전환기술이다. 본 연구에서는 실리카 마이크로입자(silica microparticle, SM)를 UC가 구현되는 폴리우레탄 박막 내에 담지 시켜 입사되는 광원의 광산란 효과를 도모함으로써 TTA-UC 효율을 향상시키고, 그 기작에 대해 탐구하였다. Seeded growth method를 통하여 약 950 nm의 균일한 크기를 갖는 SM을 합성하였으며, UC 박막 내에 담지 된 SM의 농도를 증가시킴에 따라 635 nm 광원 조사 시 430-570 nm 영역에서의 UC 세기가 최대 1.64배 증가함을 확인하였다. 삼중항 lifetime 측정을 통하여 광감응제 PdTPBP와 전자수용체 perylene 간의 triplet-triplet energy transfer(TTET) 효율을 분석한 결과, 박막 내에 담지 된 SM이 chromophore 간의 TTET에 미치는 영향은 미미한 것으로 나타났다. 또한, 입사 강도-UC 세기의 상관관계를 분석하여 TTA-UC 효율을 분석한 결과, SM이 박막 내에 존재할 경우 UC 양자효율이 최대 1.5배 향상됨을 확인하였다.