• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2008년도 추계학술대회 논문집 Vol.21
• /
• pp.165-166
• /
• 2008

$(Ba_{0.6},Sr_{0.3},Ca_{0.1})TiO_3$ powders, which were prepared by sol-gel method using a solution of Ba-acetate, Sr-acetate and Ca-acetate and Ti iso-propoxide, were mixed with organic vehicle and the BSCT thick films were fabricated by the screen-printing techniques on high purity alumina substrates. The structural and dielectirc properties were investigated for various $Pr_2O_3$ and $Y_2O_3$doping contents. As a result of thermal analysis of $(Ba_{0.6},Sr_{0.3},Ca_{0.1})TiO_3$ powders, the exothermic peak was observed at around $670^{\circ}C$ due to the formation of the polycrystalline perovskite phase. All BSCT thick films, sintered at $1420^{\circ}C$ for 2h, showed the typical XRD patterns of perovskite polycrystalline structure. The average grain size of the specimens decreased with amount of $Pr_2O_3$ and $Y_2O_3$ contents.

• 한국재료학회:학술대회논문집
• /
• 한국재료학회 2001년도 춘계학술발표강연 및 논문개요집
• /
• pp.149-149
• /
• 2001

No Abstract (See Full-text)

• 한국세라믹학회지
• /
• 제47권6호
• /
• pp.638-642
• /
• 2010

The spinel material $Li_4Ti_5O_{12}$ has attracted considerable attention as an anode electrode material for many battery applications owing to its light weight and high energy density. However, the real capacity of $Li_4Ti_5O_{12}$ powder as determined by the solid-state method is lower than the ideal capacity. In this study, we investigated the effect of the dopants in M-doped spinel $Ba_xLi_{4-2x}Ti_5O_{12}$(x=0.005, 0.05, 0.1) powders prepared by the solid-state reaction method and used as the anode material in lithiumion batteries. The results confirmed the effect of the Ba and Sr dopants on the powder properties of the spinel $Li_4Ti_5O_{12}$, which exhibited a pure spinel structure without any secondary phase in its XRD pattern. Moreover, the electrochemical properties of the spinel M-LTO materials were investigated using a half cell. The electrochemical data show that cells with anodes made of undoped $Li_4Ti_5O_{12}$ and Ba- and Sr-doped $Li_4Ti_5O_{12}$ have discharge capacities of 97, 130, and 112 mAh/g, respectively, at the first cycle. Moreover, the Ba- and Sr-doped spinel $Li_4Ti_5O_{12}$ demonstrated good properties in the mid-voltage range at 1.55 V, showing stable cyclic voltammogram properties which surpassed those of the same material without Ba or Sr at 1 C after 100 cycles.

• 한국전기전자재료학회논문지
• /
• 제20권8호
• /
• pp.680-684
• /
• 2007

In this study, we investigated the effects of structural and electrical properties of $(Ba_{0.6},\;Sr_{0.3},\;Ca_{0.1})TiO_3$ thick films with variation $Dy_2O_3$ contents. $(Ba_{0.6},\;Sr_{0.3},\;Ca_{0.1})TiO_3$ powders, prepared by the sol-gel method, were mixed organic vehicle. The BSCT thick films doped with 0.1, 0.3, 0.5, 0.7 mol% $Dy_2O_3$ were fabricated by the screen-printing techniques on the alumina substrates and the structural and dielectric properties were investigated with variation of $Dy_2O_3$ doping contents. All BSCT thick films were sintered at $1420^{\circ}C$, for 2hr. In the TG-DTA analysis, the formation of the polycrystalline perovskite phase was observed at around $670 ^{\circ}C$. In the XRD analysis, all BSCT thick films showed the cubic perovskite structure. The average thickness of BSCT thick films was approximately $65{\mu}m$. The Curie temperature decreased with increasing $Dy_2O_3$ amount. The relative dielectric constant and dielectric loss of BSCT thick films doped with $Dy_2O_3$ 0.1 mol% were 6267 and 2.6 %, respectively.

• Transactions on Electrical and Electronic Materials
• /
• 제8권6호
• /
• pp.241-245
• /
• 2007

[ $(Ba_{0.9-x}Sr_xCa_{0.10})TiO_3$ ] (x=0.33, 0.36) powders were prepared by sol-gel method. $(Ba,Sr,Ca)TiO_3$(BSCT) thick films, undoped and doped with $MnCO_3$ and $Yb_2O_3(0.1{\sim}0.7mol%)$, were fabricated by the screen printing method on the alumina substrate. The coating and drying procedure was repeated 6-times. The Pt bottom electrode was screen printing method on the alumina substrate. These BSCT thick films were annealed at $1420^{\circ}C$ for 2 hr in atmosphere. The upper electrodes were fabricated by screen printing the Ag paste and then firing at $590^{\circ}C$ for 10 min. And then the structured and dielectric properties as a function of the doping amount of $Yb_2O_3$ were studied. As a result of the TG-DTA, exothermic peak was observed at around $670^{\circ}C$ due to the formation of the polycrystalline perovskite phase. All BSCT thick films showed XRD patterns of typical cubic peroveskite structure. The average thickness of BSCT thick films was about $70^{\mu}m$. The curie temperature and the dielectric constant decreased with increasing $Yb_2O_3$ doped content and the relative dielectric constant of the specimen, doped with 0.5 mol% $Yb_2O_3$ at BSCT(54/36/10), showed a best value of 5018 at curie temperature.

• 한국세라믹학회지
• /
• 제51권6호
• /
• pp.605-611
• /
• 2014

$SrGd_{2-x}(MoO_4)_4:Er^{3+}/Yb^3$ phosphors with doping concentrations of $Er^{3+}$+ and $Yb^{3+}$ ($x=Er^{3+}+Yb^{3+}$, $Er^{3+}=0.05$, 0.1, 0.2, and $Yb^{3+}=0.2$, 0.45) were successfully synthesized by the cyclic microwave-modified sol-gel method, and their upconversion mechanism and spectroscopic properties have been investigated in detail. Well-crystallized particles showed a fine and homogeneous morphology with grain sizes of $2-5{\mu}m$. Under excitation at 980 nm, $SrGd_{1.7}(MoO_4)_4:Er_{0.1}Yb_{0.2}$ and $SrGd_{1.5}(MoO_4)_4:Er_{0.05}Yb_{0.45}$ particles exhibited a strong 525-nm emission band, a weak 550-nm emission band in the green region, and a very weak 655-nm emission band in the red region. The Raman spectra of the doped particles indicated the domination of strong peaks at higher frequencies of 1023, 1092, and $1325cm^{-1}$ and at lower frequencies of 223, 2932, 365, 428, 538, and $594cm^{-1}$ induced by the incorporation of the $Er^{3+}$+ and $Yb^{3+}$+ elements into the $Gd^{3+}$ site in the crystal lattice, which resulted in the unit cell shrinkage accompanying a new phase formation of the $[MoO_4]^{2-}$ groups.

• 한국전기전자재료학회논문지
• /
• 제20권7호
• /
• pp.581-586
• /
• 2007

[ $(Ba_{0.57}Sr_{0.33}Ca_{0.10})TiO_3$ ] (BSCT) powders, prepared by sol-gel method, were mixed with organic vehicle and the BSCT thick films were fabricated by the screen printing method. The structural and dielectric properties were investigated as a function of the $Yb_2O_3$ doping contents. As a result of the TG-DTA, exothermic peak was observed at around $670^{\circ}C$ due to the formation of the polycrystalline perovskite phase. All BSCT thick films showed the typical XRD patterns of a cubic polycrystalline structure. The average thickness of all BSCT thick films was about $70{\mu}m$. The grain size of the BSCT thick film doped with 0.7 mol% $Yb_2O_3$ was approximately $6.2{\mu}m$. The Curie temperature and relative dielectric constant at room temperature decreased with increasing $Yb_2O_3$ amount. Relative dielectric constant and dielectric loss of the specimen doped with 0.1 mol% $Yb_2O_3$ were 4637 and 19 % at Curie temperature, respectively.

• 한국결정성장학회지
• /
• 제11권2호
• /
• pp.71-77
• /
• 2001

고상반응법에 의해 제조된 $SrAl_2$$O_4$ : $Eu^{2+}$,$Dy^{3+}$ 계 형광체에 $Dy_2$$O_3$의 농도를 0.0~9.5mol%까지 변화시켜, $Dy_2$$O_3$의 첨가량에 따른 결정특성과 장잔광 축광재료로서 가장 중요한 발광 및 장잔광 특성을 조사하였다. $SrAl_2$$O_4$ : $Eu^{2+}$,$Dy^{3+}$ 계 형광체는 $Dy_2$$O_3$의 농도에 관계없이 녹색의 520nm파장을 최대 발광파장으로 하는 발광스펙트럼을 나타내었고, 발광특성을 크게 저해하지 않는 $SrAl_2$$O_4$의 단일상을 얻기 위한 농도는 1.0mol%이하가 적절하였다. 또한 $SrAl_2$$O_4$ : $Eu^{2+}$,$Dy^{3+}$ 형광체의 잔광 강도는 $Dy_2$$O_3$의 농도에 무관하게 시간에 따라 모든 시료에서 지수 함수적으로 감소하나, $Dy_2$$O_3$의 농도가 1.0mol% 이하인 경우에 발광의 감쇠속도가 작은 뛰어난 장잔광특성을 나타내었다.

• 한국결정성장학회지
• /
• 제22권5호
• /
• pp.241-246
• /
• 2012

본 연구에서는 complex citrate-gel method를 이용하여 $Yb3^{3+}$, $Er^{3+}$ 이온이 동시 도핑 된 $SrMoO_4$($SrMoO_4$: $Yb^{3+}/Er^{3+}$)를 성공적으로 합성하였으며, 그 구조적, 광학적 특성을 분석하였다. 980 nm의 근적외선 여기 광 하에서 상기 분말은 530 및 550 nm 부근의 강한 녹색 방출과 670 nm 부근에서의 약한 적색 방출은 $Er^{3+}$ 이온 내의 intra 4f transition $Er^{3+}$($^4F_{9/2}$, $^2H_{11/2}$, $^4S_{3/2}$) ${\rightarrow}$ $Er^{3+}(^4I_{15/2})$에 의한 현상임을 확인하였다. 또한, $Er^{3+}$ 및 $Yb^{3+}$ 이온의 최적 도핑 농도는 각각 2/16 mol%로 조사되었으며 그에 따른 형성 가능한 upconversion 메커니즘에 대하여 논의하였다.

• 한국결정성장학회지
• /
• 제22권2호
• /
• pp.78-83
• /
• 2012

$La_{1-x}Sr_xMn_{0.8}Cu_{0.2}O_{3-{\delta}}$(LSMCu)에서 Sr 함량에 따른 구조적 변화와 전기전도도에 대해 연구, 고찰하였다. EDTA citric complexing process(ECCP)로 페로브스카이트 구조를 갖는 $La_{0.8}Sr_{0.2}MnO_3$(LSM)와 $La_{1-x}Sr_xMn_{0.8}Cu_{0.2}O_3$($0.1{\leq}x{\leq}0.4$)을 제조하였다. Sr 함량이 증가할수록 격자상수와 격자부피는 감소하는 경향을 나타내었으며, 이는 Sr 함량이 증가함에 따라 B-site에서 증가하는 $Mn^{4+}$ 이온과 $Cu^{3+}$ 이온의 영향인 것으로 판단하였다. $0.1{\leq}x{\leq}0.3$ 범위의 조성에서 Sr 함량이 증가할수록 $500{\sim}1000^{\circ}C$에서 측정된 전기전도도는 증가하였고, x = 0.3 조성에서는 $750^{\circ}C$와 $950^{\circ}C$에서 각각 172.6 S/cm와 177.7 S/cm (최고값)를 나타내었다. 반면, x = 0.4 조성에서는 전기전도도가 감소하였는데 이는 입계에 발생한 산화물에 의한 영향으로 판단하였다. Sr 함량이 증가함에 따라 B-site에 존재하는 $Mn^{4+}$ 이온과 $Cu^{3+}$ 이온의 증가로 인해 격자수축이 발생하고, hopping mechanism에 관여하는 charge carrier들이 늘어나 전기전도도가 증가한 것으로 판단하였다.