• The Korean Journal of Food And Nutrition
• /
• v.27 no.5
• /
• pp.851-858
• /
• 2014

Goami2, Goami3 and Goami4 were identified as fiber-rich rice cultivars which were developed by mutation breeding with Ilpum. The purpose of this study was to develop a method for producing Makgeolli with the fiber-rich rice cultivars, Goami2, Goami3, Goami4, and to investigate the characteristics of Makgeolli during the fermentation process. Makgeolli was produced herein by fermentation steamed rice (SR), raw rice flour (RF), and steamed rice flour (SF) from Goami2, Goami3, Goami4, Ilpum and Sealgaeng rice cultivars. The physicochemical characteristics including alcohol and sugar content, pH, total acidity, TDF (total dietary fiber), and color of the Makgeolli samples were analyzed. Makgeolli produced with Ilpum and Sealgaeng showed satisfactory fermention characteristics in alcohol and sugar content when SR, RF and SF were used. In the case of Goami2, Goami3, and Goami4, the use of SF resulted in 17.2~20.1% alcohol content, whereas only 10% alcohol was produced by SR. The sugar contents in the SF-makgeolli samples were also higher ($9{\sim}10^{\circ}Brix$) than in the SR-makgeolli ($5.35{\sim}5.44^{\circ}Brix$) for Goami2 and Goami4 cultivars. The dietary fiber contents of the Makgeolli samples produced using SF from the fiber-rich rice cultivars were higher (1.35~1.52 g/100 mL) than those produced with Ilpum and Sealgaeng (0.74~0.87 g/100 mL). From these results, it may be suggested that SF would be an appropriate material to brew Makgeolli using fiber-rich rice cultivars to obtain better physicochemical and functional qualities.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.20 no.1
• /
• pp.21-24
• /
• 2010

The effects of mole ratio(A/B) m and Ti-ion on the dielectric properties and microstructure of the microwave dielectric ceramics $(Ca_{0.7}Sr_{0.3})_m(Ti_yZr_{1-y})O_3$ were investigated. Ti ions substituted on Zr-sites in these modified $CaZrO_3$ composition strongly affect the sintering density and microstructure of the fired ceramic body. With increasing the amount of Ti substituted on Zr-sites, the sintered density rapidly increased and the dense microstructure was obtained for the compositions having mole ratio of 1.01, whereas the sintered density and microstructure are nearly constant with the content of Ti-ion for the compositions having mole ratio of 0.99. With increasing the content of Ti ion, the curve of TCC (Temperature Coefficient of Capacitance) as a function of temperature rotated clockwise and satisfied the COG characteristics for both of compositions with mole ratio of 0.99 and 1.01. The content of Ti ion seems to be more effective than mole with respect to the controlling of firing and TCC.

• Journal of the Korean GEO-environmental Society
• /
• v.22 no.12
• /
• pp.41-50
• /
• 2021

This study investigated the changes in engineering characteristics of sand-tire chip mixtures during repetitive loading. To quantify the changes in the maximum shear modulus according to the tire chip content in the mixtures and the particle size ratio between sand particle and tire chip, the samples were prepared with tire chip content of TC = 0, 10, 20, 40, 60, and 100%, and the particle size ratios SR were also set to be SR = 0.44, 1.27, 1.87, and 4.00. The stress of the prepared sample was applied through a pneumatic cylinder. The experiment was conducted in the order of static loading (= 50 kPa), cyclic loading (= 50-150 kPa), static loading (= 400 kPa) and unloading. The stress applied to tested mixtures was controlled by a pressure panel and a pneumatic valve by using an air compressor. The shear wave velocity was measured during static and cyclic loadings by installing bender elements at the upper and lower caps of the mold. The results demonstrated that the change in maximum shear modulus of all tested materials with varying SR during repetitive loading is the most significant when TC ~ 40%. In addition, the mixture with smaller SR at a given TC shows greater increase in maximum shear modulus during repetitive loading.

• Proceedings of the Materials Research Society of Korea Conference
• /
• 1998.08a
• /
• pp.136.3-136
• /
• 1998

• Korean Journal of Materials Research
• /
• v.12 no.12
• /
• pp.962-966
• /
• 2002

The $SrBi_2$$Nb_2$$O_{9}$ (SBN) thin films were deposited with $SrNb_2$$O_{6}$ / (SNO) and $Bi_2$$O_3$ targets by co-sputtering method. For the growth of SBN thin films, we adopted the various power ratios of two targets; the power ratios of the SNO target to $Bi_2$$O_3$ target were 100 W : 20 W, 100 W : 25 W, and 100 W : 30 W during sputtering the SBN films. We found that the electrical properties of SBN films were greatly dependent on Bi content in films. The $Bi_2$Pt and $Bi_2$$O_3$ phase as second phases occurred at the films with excess Bi content greater than 2.4, resulting in poor ferroelectric properties. The best growth condition of the SBN films was obtained at the power ratio of 100 W : 25 W for the two targets. At this condition, the crystallinity and electrical properties of the films were improved at even low annealing temperature as $700^{\circ}C$ for 1h in oxygen ambient and the Sr, Bi and Nb component in the SBN films were about 0.9, 2.4, and 1.8 respectively. From the P-E and I-V curves for the specimen, the remnant polarization value ($2P_{r}$) of the SBN films was obtained about 6 $\mu$C/c $m^2$ at 250 kV/cm and the leakage current density of this thin film was $2.45$\times$10^{-7}$ $A/cm^2$ at an applied voltage of 3 V.V.

• Journal of Animal Science and Technology
• /
• v.47 no.3
• /
• pp.355-362
• /
• 2005

This study was carried out to obtain basic information on variety selection for the utilization of whole crop rices(WCR) at National Institute of Crop Science, RDA, in 2004. Fifteen varieties and elite line were evaluated on feed value such as dry matter yield(DMY), crude protein( CP), acid detergent fiber(ADF), neutral detergent fiber(NDF) and total digestible nutrients(TDN). The dry matter yields were ranged from 13.23 to 17.83 ton per ha, the highest yielding varieties were Sobibyeo(l6.98ton / ha) in Japonica type, SR22060 (17.83 ton / ha) in New plant type, Hangangchalbyeo(I7.66 ton / ha) in Tongil type. Suweon 468 showed the highest value in the RFV and TDN content among the varieties, and Suweon 468, Suweon 498, Suweon 490 and SR22058 were chosen to have the high feed values through cluster analysis. The dry weight(grain) was found to be positively related with percent of the ripened grain, 1,000 grain weight and CPo TDN content was found to be positively related with CP, but negatively related with NDF and ADF. RFV was found to be negatively related with plant height, NDF and ADF. The promising rice varieties for WCR were Suweon 468, Suweon 498, Suweon 490 and SR22058 on the basis of CP, TDN and DMY.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 1998.11a
• /
• pp.33-36
• /
• 1998

BST(66/34) and BSCT(60/30/10) ceramics were prepared by mixed oxide method and studied about the microstructural and dielectric properties with $Y_2$O$_3$, Dy$_2$O$_3$, La$_2$O$_3$, MnCO$_3$. The grain size of undoped BST was 20~30 ${\mu}{\textrm}{m}$, but that of BST, doped content of MnCO$_3$ was 0.1 mol%, was decreased with increasing the contents of $Y_2$O$_3$. As the content of $Y_2$O$_3$ was Increased, Tc was shifted to lower temperature and dielectric constant at Tc was decreased. The dielectric constant of doped BSCT(60/30/10) ceramics ( 0.9 mol% $Y_2$O$_3$. and 0.1 mol% MnCO$_3$) was about 8, 000 at Tc( 22$^{\circ}C$ ).

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2004.07b
• /
• pp.776-779
• /
• 2004

The dielectric and electrical characteristics of Ce doped (Ba0.6Sr0.4)TiO3 (BST) thin films were investigated as a function of Ce content. Both atomic force microscopy (AFM) and x-ray diffraction (XRD) analysis showed that increasing the Ce doping ratio causes the decrease in grain size while the surface remains smooth and crack-free. The dielectric properties of the Ce doped BST films were found to be strongly dependent on the Ce contents. The dielectric constant and dielectric loss of the BST films decreased with increasing Ce content. However, it was also found that, compared with undoped films, the increase of Cecontent improves the leakage-current characteristics. The improvement of the electrical properties of Ce-doped BST films may be related to the decrease in the concentration of oxygen vacancies. The figure of merit (FOM) reached the maximum value of 48.9 at the 1 mol % of Cedoping. The dielectric constant, loss factor, and tunability of the 1 mol% Ce doped Ba0.6Sr0.4TiO3 thin films were 320, 0.011, and 46.3%, respectively.

• The Journal of Asian Finance, Economics and Business
• /
• v.7 no.11
• /
• pp.315-326
• /
• 2020

This study aims to test empirically whether the ASEAN Corporate Governance Scorecard (ACGS) has a positive effect on Sustainability Reporting (SR) and whether the ACGS and Sustainability Reporting (SR) have a positive effect on Firm Value (FV). The study was conducted in five ASEAN countries - Indonesia, Malaysia, Singapore, Philippines, and Thailand from 2014 - 2017. The research sample was collected from companies with the ACGS data and obtained with the help of 359 company observations. Hypothesis testing was performed using the Ordinary Least Square (OLS). The results of the study do not support all hypotheses. The ACGS has no effect on sustainability reporting. The ACGS has a significant negative effect on firm value, while sustainability reporting has a negative and insignificant effect on firm value. The ACGS and sustainability reporting are not good news for investors. This research's limitation is that companies rarely disclose the final value of the ACGS in their annual reports, so this research uses content analysis. The weakness of content analysis is the researchers' subjectivity so that the point of view between researchers is different. Besides, sustainability reporting for several ASEAN countries is voluntary, so not all companies can be sampled, which ultimately affects interpretation.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2000.11a
• /
• pp.363-366
• /
• 2000

In this study, SrBi$_2$Ta$_2$$O_{9}$ (SBT) thin films were etched at different Cl$_2$gas mixing ratio in Cl$_2$/Ar. The maximum etch rate of SBT was 883 $\AA$/min in Cl$_2$(20%)/Ar(80%). The result indicates that physical sputtering of charged particles is dominant to chemical reaction in etching SBT thin films. To evaluate the changes of morphology and crystallinity on the near surface of etched SBT, atomic force microscopy (AFM) and x-ray diffraction (XRD) were used. The rms values of etched samples in Ar only or Cl$_2$ only plasma were higher than that of as-deposited, Cl$_2$/Ar Plasma. The SBT (105) crystalinity of the etched samples decreased in Af only or Cla only plasma, but maintain constant in ClyAr plasma. This can be illustrated by a decrease of Bi content or nonvolatile etching products (Sr-Cl and Ta-Cl), resulting in the changes of stoichiometry on the etched surface of the SBT thin films. The decrease of Bi content and nonvolatile etch products were revealed by x-ray photoelectron spectroscopy (XPS) and secondary ion mass spectrometry (SIMS).).