• 제목/요약/키워드: Square section

검색결과 542건 처리시간 0.028초

감은사지 3층석탑(서탑)의 지반 특성을 위한 지구물리탐사 (GEOPHYSICAL EXPLORATION FOR THE SITE CHARACTERISTICS OF THE WESTERN THREE-STORY STONE PAGODA IN GAMEUM TEMPLE)

  • 서만철;최희수;이찬희;오진용
    • 지구물리
    • /
    • 제6권1호
    • /
    • pp.39-46
    • /
    • 2003
  • 경상북도 경주시 양북면 용당리 감은사지터에 위치한 쌍둥이 3층석탑(전체높이 약 13.4 m, 기단폭 6.78 m x 4.4 m)은 682년에 건립된 국내 최대 3층 석탑으로 국보급 문화재이다. 3층석탑의 서탑(이하 감은사지서탑)은 1959년에 해체 수리되었으나, 현재는 석탑 석재인 화강섬록암의 심한 풍화가 관찰되며, 탑의 구조적 불균형에 의하여 생겨난 하중의 편중으로 일부 옥개석 사이가 역 V자형으로 벌어져 있다. 일반적으로 석탑 안정성 진단을 위해서는 석탑과 인근의 지반환경을 이해하는 것이 필수적이다. 이 연구에서는 감은사지서탑 주변에서 탄성파탐사와 전기비저항탐사의 복합 지구물리탐사를 실시하였다. 웨너법에 의한 천부층의 전기비저항 수평 분포는 55∼350 Ωm의 범위인데, 대체로 석탑 남서측면이 상대적으로 높은 비저항인 반면 북동측은 100 Ωm이하의 낮은 비저항 지역으로서 연약지반으로 해석된다. 이는 동측 방향으로의 구조적인 기울임이 관찰된 석탑의 변위측정 결과와 부합한다. 탄성파 굴절법 탐사에 의하면 석탑인근의 약 3 m 두께의 최상부층의 탄성파 P파 속도범위는 200∼700 m/s이다. 복합지구물리 탐사결과 나타난 감은사지서탑의 기초는 약 11 m x 11 m의 장방형 형태로 약 3 m 깊이까지 분포하는 것으로 해석된다.

  • PDF

고강도 띠철근으로 구속된 고강도 콘크리트 기둥의 연성 (Ductility of High-Strength Concrete Columns with High-Strength Lateral Ties)

  • 문호권;이영호;양근혁;정헌수
    • 콘크리트학회논문집
    • /
    • 제13권3호
    • /
    • pp.261-267
    • /
    • 2001
  • 본 연구는 고축력을 받는 고강도 콘크리트 기둥부재의 연성을 확보하기 위한 띠철근 양 산정시 띠철근 강도가 연성에 미치는 영향이 현저하게 나타나기 시작하는 축력비 및 연성과 주근의 관계를 파악하기 위한 실험적 연구이다 본 연구의 목적을 이루기 위해 띠철근 항복강도, 축력비, 주근 양 및 배치형태 등을 주요 변수로 하여 총 12개의 시험체를 제작하였다. 시험체의 크기는 20$\times$20$\times$80 cm이며 실험구간은 중앙부 40 cm 이다. 실험결과 띠철근의 항복강도가 연성에 영향을 현저히 미치기 시작하는 축력비는 0.4 $f_{ck}$ $A_{g}$이었으며 현 ACI318-99 내진기준에 따라 띠철근 양을 산정할 때 저축력하에서 고강도 띠철근을 사용할 경우 띠철근 간격이 크고 띠철근 강도의 영향이 미비하여 부재는 취성적인 거동을 보일 위험이 있다. 고축력하에서 고강도 띠철근은 주근의 좌굴억제에도 상당히 효율적이었다. 특히 0.4 $f_{ck}$ $A_{g}$이상의 고축력하에서 고강도 띠철근이 응력을 충분히 발휘하기 위해서는 띠철근 체적비 및 배근형태, 주근의 배치형태, 축력비 등을 함께 고려하여야 할 것이라고 사료된다.다.

압전감쇠를 이용한 압전지능패널의 전달 소음저감 성능 (Transmission Noise Seduction Performance of Smart Panels using Piezoelectric Shunt Damping)

  • 이중근
    • 한국산학기술학회논문지
    • /
    • 제3권1호
    • /
    • pp.49-57
    • /
    • 2002
  • 안전감쇠에 의해 전달 소음을 저감시키는 압전지능패널에 대한 실험적 연구를 수행하였다. 압전지능패널은 기본적으로 압전재료를 부착한 평판 구조물에 션트회로를 연결하고 흡음재들을 부가한 구조물이다. 지능패널은 중 주파수영역에서 흡음재의 수동적 특성을 이용하고 저주파수영역의 공진주파수에서는 압전감쇠를 적용하여 소음저감을 이루는 개념이다. 저주파공진에서의 소음저감을 위하여 측정한 전기적임피던스모델을 이용하는 압선감쇠를 적용하였다. 압전감쇠를 위한 공진 션트회로는 직렬로 연결된 저항과 인넉터로 구성되었으며, 저항과 인덕터는 회로에서 소산되는 에너지가 최대가 될 수 있는 값으로 최적설계하였다. 압전지능패널의 전달 소음저감성능은 음향터널을 사용하여 실험을 수행하였다. 음향터널은 사각단면 형태이며 소음 원으로 터널의 한 쪽 끝에 스피커가 설치되었다. 패널들을 터널의 중앙에 설치하여 투과 음압을 측정하였다. 흡음재를 갖는 지능패널과 흡음재와 공기층을 갖는 압전이중지능패널은 수동적 특성에 의해 저주파영역의 공진주파수를 제외한 중 주파수영역에서 뚜렷한 소음저감 효과를 나타내었다. 압전감쇠를 통하여, 첫 번째 공진주파수에서 약 10dB, 8dB의 소음저감 효과를 얻었다. 압전감쇠와 수동특성을 혼용하는 압전지능패널은 넓은 주파수영역에서의 소음저감을 위한 유망한 기술이다.

  • PDF

k-Nearest Neighbor 알고리즘을 이용한 도심 내 주요 도로 구간의 교통속도 단기 예측 방법 (Short-Term Prediction of Vehicle Speed on Main City Roads using the k-Nearest Neighbor Algorithm)

  • 모하메드 아리프 라시이디;김정민;류광렬
    • 지능정보연구
    • /
    • 제20권1호
    • /
    • pp.121-131
    • /
    • 2014
  • 교통속도는 교통 문제를 해결하기 위한 중요한 지표 중 하나이다. 이를 이용하여 교통혼잡 탐지, 주행 시간 예측, 도로 설계와 같은 다양한 문제 해결에 활용할 수 있다. 따라서 정확한 교통속도 예측은 지능형 교통 시스템의 개발에 있어 필수적인 요소라고 할 수 있다. 본 논문에서는 대한민국 부산시의 특정 도로를 대상으로 교통 속도에 대한 분석 및 예측을 수행하였다. 과거 연구에서는 대상 도로의 속도 예측을 위해 과거 대상 도로의 교통속도 이력 데이터만을 사용하였다. 그러나 실제 대상 도로의 교통 상황은 인접한 도로의 교통 상황의 영향을 받게 된다. 따라서 본 논문에서는 실제 부산시의 과거 교통속도 이력 데이터를 기반으로 대상 도로와 인접 도로를 모두 고려하여 교통속도 예측 모델의 학습을 위한 속성을 추출하였다. 이와 같이 후보 속성들을 추출 한 후 선형 회귀 (linear regression), 모델 트리 (model tree) 및 k-nearest neighbor (k-NN) 기법을 이용하여 속성의 부분집합 선택 (feature subset selection)과 교통속도 예측 모델 생성을 수행하였다. 실험 결과 주어진 교통 데이터에서 k-NN 기법은 선형 회귀 및 모델 트리 기법에 비해 평균절대백분율오차 (mean absolute percent error, MAPE)와 제곱근평균제곱오차 (root mean squared error, RMSE) 측면에서 더 나은 성능을 보임을 확인하였다.

HEC-RAS를 이용한 하천변 농경지의 1, 2차원 연계 침수 모의 (Combined 1D/2D Inundation Simulation of Riverside Farmland using HEC-RAS)

  • 전상민;송정헌;최순군;이경도;강문성
    • 한국농공학회논문집
    • /
    • 제60권5호
    • /
    • pp.135-147
    • /
    • 2018
  • The objective of this study was to analyze the characteristics of combined 1D/2D inundation simulation of riverside farmland using the Hydrologic Engineering Center - River Analysis System (HEC-RAS). We compared and analyzed inundation simulation results between 1D and combined 1D/2D hydraulic simulation using HEC-RAS. Calibration and validation of stream stage were performed using three rainfall events. The coefficient of determination ($R^2$) and root mean square error (RMSE) between simulated and observed stream stage were 0.935 - 0.957 and 0.250 m - 0.283 m in calibration and validation, respectively. The inundation area showed no significant difference in 1D and combined 1D/2D simulation ($8.48km^2$ in 1D simulation, $8.75km^2$ in combined 1D/2D simulation). The average inundation depth by 1D simulation was 1.4 m deeper than combined 1D/2D simulation. In the lower inundation depth, the inundation area by combined 1D/2D simulation was larger than inundation area by 1D simulation. As the inundation depth increased, the inundation area by 1D simulation became wider. In the case of the 1D/2D combined simulation, low elevation areas along the river bank were inundated widely. Compared to 1D/2D combined simulation, the flood radius in some sections was longer in 1D simulation. In the 1D analysis, because the low altitude riverside farmlands are also assumed to stream, it is calculated that riverside farmlands have the same stage as the mainstream when the stream is overflowed. Therefore, the inundation area seems to be overestimated in those sections. In other regions, the inundation areas tend to be broken depending on overflow by each stream cross-section. In the case of river flooding, the overflow is expected to flow to the lower area depending on the terrain, such as the results of the combined 1D/2D simulation. It is concluded that the results of combined 1D/2D inundation simulation reflected the topographical characteristics of low-lying farmland.

Experimental Investigation on Post-Fire Performances of Fly Ash Concrete Filled Hollow Steel Column

  • Nurizaty, Z.;Mariyana, A.A.K;Shek, P.N.;Najmi, A.M. Mohd;Adebayo, Mujedu K.;Sif, Mohamed Tohami M.A;Putra Jaya, Ramadhansyah
    • 국제초고층학회논문집
    • /
    • 제10권4호
    • /
    • pp.335-344
    • /
    • 2021
  • In structural engineering practice, understanding the performance of composite columns under extreme loading conditions such as high-rise bulding, long span and heavy loads is essential to accuratly predicting of material responses under severe loads such as fires or earthquakes. Hitherto, the combined effect of partial axial loads and subsequent elevated temperatures on the performance of hollow steel column filled fly ash concrete have not been widely investigated. Comprehensive test was carried out to investigate the effect of elevated temperatures on partial axially loaded square hollow steel column filled fly ash concrete as reported in this paper. Four batches of hollow steel column filled fly ash concrete ( 30 percent replacement of fly ash), (HySC) and normal concrete (CFHS) were subjected to four different load levels, nf of 20%, 30%, 40% and 50% based on ultimate column strength. Subsequently, all batches of the partially damage composite columns were exposed to transient elevated temperature up to 250℃, 450℃ and 650℃ for one hour. The overall stress - strain relationship for both types of composited columns with different concrete fillers were presented for each different partial load levels and elevated temperature exposure. Results show that CFHS column has better performance than HySC at ambient temperature with 1.03 relative difference. However, the residual ultimate compressive strength of HySC subjected to partial axial load and elevated temperature exposure present an improvement compared to CFHS column with percentage difference in range 1.9% to 18.3%. Most of HySC and CFHS column specimens failed due to local buckling at the top and middle section of the column caused by concrete crushing. The columns failed due to global buckling after prolong compression load. After the compression load was lengthened, the columns were found to fail due to global buckling except for HySC02.

타공판에 따른 전기집진기 내의 유동분포 (Flow Distribution in an Electrostatic Precipitator with a Perforated Plate)

  • 김동욱;정상현;심성훈;김진태;이상섭
    • 청정기술
    • /
    • 제25권2호
    • /
    • pp.147-152
    • /
    • 2019
  • 각종 산업시설과 발전시설에서 배출되는 입자상 물질의 문제로 인하여, 입자상 물질의 제거 효율이 뛰어난 전기집진기의 중요성이 증가하고 있다. 전기집진기의 효율은 전기집진기 내부의 유동분포에 매우 큰 영향을 받으므로, 전기집진기 내부의 유동 균일화를 위한 연구가 지속적으로 이루어지고 있다. 본 연구에서는 유입부, 디퓨저, 본체, 수축부로 구성된 길이 3.5 m, 높이 0.875 m 전기집진기를 제작하였다. 디퓨저에는 3개의 타공판을 설치하였다. 5개의 피토관을 높이 방향으로 부착하여 전기집진기 단면 55지점의 유속을 측정하였다. 디퓨저에 타공판이 설치되었을 때, 전기집진기 내부의 유동분포는 RMS%를 이용하여 평가하였다. 또한 타공판의 타공률 변화에 따른 유속분포도 분석하였다. 그 결과, 타공판이 전기집진기 내부의 유동분포에 미치는 영향이 매우 큼을 확인하였고, 디퓨저 입구에서부터 40%, 50%, 50% 타공률을 가진 타공판을 설치하였을 때, 가장 균일한 유동분포를 나타내었다.

1980년대 민중미술론의 기원과 형성 (The Origin and Formation of Korean Public Art Theories in the 1980s)

  • 최열
    • 미술이론과 현장
    • /
    • 제7호
    • /
    • pp.37-64
    • /
    • 2009
  • The theories of Korean Public Art originated by the artists who were against dictatorship and they associated with democratic politicians. They criticized the Fine art that were supported by the dictatorship and gave their efforts for restoration of 'resistance paintings(against dictatorship)', 'proletarian painting', 'realism painting'. In addition, they participated new social ideology(democracy) movement and demonstrated for their rights in arts. These became the main kernel the public art theory was initiated. The public artists splitted into several different parts and participated in the democratic social movement as well as the art movement for freedom. They opened various art exhibitions within different genre, diverse space for various art section such as an exhibition hall, a factories, a university, or a congregation square. Furthermore, the public art theorists published their divergent views through newspaper/broadcasting or unauthorized printed materials. Most of the public artist and the theorists kept their relationship strongly until 1985, the time when 'National Arts Association' started. In 1983 and 1984, they were clearly separated into two parts; artists(move only in art museums) and activists(move in public spaces like school, convention square etc). Their ideological separation also took out national problems. The division; professional artists and armatures, became the social issue as a social stratification matter. And in creating method, there are also other conflicts; critical realism, and public realism as well as western painting and traditional one. These kinds of separation and conflicts made different Public artists associations, under divergent names; 'Reality and Speak'(R&S), 'KwangJu Art Association', 'Durung', 'Dang(Land)', and 'Local Youth Students Association'. In addition, their ideology and pursuit toward art movements were very difference. However, the differences and conflicts weakened When the oppression of democratic education from new dictatorship(Pres. Jun, Doo Hwan) came out. In August. 1985 the government opened to the public so called, 'The draft of School stabilization law'(Hankwon Anjung Bup) to control the teachers' rights and that initiated bigger street demonstration and conflicts between police and educators. In November.1985, assembly meeting of National Arts Association in democracy opened as 'ONE' combined organization. In this presentation, I'd like to summarize the stream of art movement until 1984, and clarify the main art theories that lead the Public Art Movements in 1980s. The main theories in 1980s are crucial because they become the origin of public art theories. This presentation started with O,youn's "Hyunsil Dong In the first declaration" and explained the absent of practice in 1970s. In addition, Won, Dong Suk 's theory was mentioned as all over struggles in theories before 1980s. GA and R&S 's founding declarations in 1970s were the start of public art theorists' activities and this article reported the activities after the declarations. First, realism base on the consciousness of reality. Second, practice art democratization based on the ideology. Third, the subject of public art movement based on understanding people's social stratification structure. Fourth, the matters of national forms and creative ways in arts based on showing reality. Fifth, the strong points in arts that the practitioners accepted. About the public art theories around 1984, I discussed the dividing point of public art theories that were shown in 'generation theory', 'organization theory', and 'popularization theory' by the practitioners. The public realism theory that subjects the contradiction of reality and point out the limits of critical realism not only showing the new creative ways but also giving the feeling of solidarity to the public art activist groups. After that, public art movements expressed 'Dismentlement of Capitalism' and 'Public revolution'. In addition, the direction of public art movements were established strongly. There were various opinions and views during the start and formation of the public art theories. The foundation of theorists activities derived from the practitioners who had the concept based on stratification and nationalism. The strong trend of group division spreaded out by practitioners who opened art work together in factories, universities, squares and rural areas. Now many lively active practitioners are gone to the other field not related with arts, and others join into professional art field not public art one with unknown reason. The theorists have the same situation with the practitioners. It means to me that theory always have to be based on the practice.

  • PDF

조선왕릉 연지(蓮池)의 특성과 전형 (A Study on the Characteristics and Model of Lotus Pond in Joseon Royal Tombs)

  • 고승관;구본학;최종희
    • 한국전통조경학회지
    • /
    • 제29권3호
    • /
    • pp.116-123
    • /
    • 2011
  • 본 연구는 조선왕릉 연지보존 및 복원을 위한 기초연구로 고문헌(춘관통고, 광릉지)에 그 기록이 남아 있으며, 비교적 원형이 잘 보존된 남양주 광릉, 효릉, 김포 장릉, 숭릉의 연지를 대상으로 형태, 재료, 구조 및 공법, 식생적 특성 및 전형에 관하여 살펴보았다. 조선왕릉 연지형태는 평면적으로는 방지원도형 혹은 방지형이며, 크기는 가로 7.5~81m, 세로 6.5~45m, 섬의 직경은 8~16m, 수심은 0.5~1.2m, 단면은 연지의 밑 부분은 좁고 윗부분으로 갈수록 넓은 형태로 조성되었다. 연지바닥은 진흙이 쓰인 것으로 볼 때 흙이 주재료이며, 연지의 구조 및 공법은 토축으로 들여쌓은 지안이 전형으로 보이며, 물의 입수와 배수는 암거수로를 통해 이루어졌다. 연지식생은 현재 많은 수종이 재식되어 있으나, 문헌과 현황을 비교해 보았을 때, 연지 내부는 연꽃, 연지 주변은 소나무 전나무 기타 화훼류 그리고 섬 안은 소나무가 재식되었음을 파악할 수 있었다. 한편, 궁궐 연지를 비교한 결과, 형태와 식생적인 측면에서는 큰 차이가 없었으나, 장대석이라는 재료의 차이에 따라 그 구조 및 공법에도 차이가 있음을 파악할 수 있었다. 이에 본 연구에서는 조선왕릉 연지의 특성을 분석하고 전형을 구명함으로써, 향후 조선왕릉 연지를 재현하는데 기본적 준거를 제공하였다는 긍정적 측면이 있다.

황사 발생 기간 동안 WRF-Chem 모델을 이용한 미세먼지 예측과 관련 기상장에 대한 민감도 분석 (Analysis of Sensitivity to Prediction of Particulate Matters and Related Meteorological Fields Using the WRF-Chem Model during Asian Dust Episode Days)

  • 문윤섭;구윤서;정옥진
    • 한국지구과학회지
    • /
    • 제35권1호
    • /
    • pp.1-18
    • /
    • 2014
  • 이 연구의 목적은 2008년 5월 29일 우리나라에 영향을 미치는 황사를 예측하기 위해 WRF-Chem 모델 내 에어로졸 스킴과 광물성 먼지 옵션에 따른 미세먼지 농도 변화와 그에 따른 기상장의 민감도를 분석하는 것이다. 미세먼지의 인위적 배출량에 대해서는 $0.5^{\circ}{\pm}0.5^{\circ}$ RETRO 전구 배출량을, 광해리의 경우 Fast-J 광해리 스킴을, 그리고 황사 발생량을 추정하기 위해 RADM2 화학메커니즘 및 MADE/SORGAM 에어로졸 시나리오, MOSAIC 8 섹션 에어로졸 시나리오, 그리고 GOCART 먼지 침식 시나리오를 각각 적용하였다. 그 결과 RADM2 화학메커니즘 및 MADE/SORGAM 에어로졸 시나리오가 다른 시나리오들보다 우리나라 황사 먼지 농도와 배경 PM 농도를 더 높게 모사하였다. 그리고 이 시나리오와 서울의 각 대기질 측정망의 평균 PM10 농도와의 비교 결과, 상관계수는 0.67, 평균제곱근오차는 $44{\mu}gm^{-3}$으로 나타났다. 또한 WRF-Chem 모델에서 상기 3가지 시나리오와 이들 시나리오가 없는 순수 기상에서의 온도, 풍속, 경계층 높이, 장파복사의 기상 민감도를 분석한 결과, 1,800-3,000 m 경계층 높이와 $2-16ms^{-1}$ 풍속 U 성분의 공간적 분포가 황사 먼지 발생의 공간적 분포와 유사하게 나타났다. 그리고 GOCART 먼지 침식 시나리오와 RADM2 화학메커니즘 및 MADE/SORGAM 에어로졸 시나리오는 황사 먼지 또는 에어로졸과 기상이 온라인으로 상호작용함으로써 지구장파복사가 더 낮게 모사되었다.