• 한국항행학회논문지
• /
• 제25권1호
• /
• pp.90-95
• /
• 2021

본 논문에서는 chipless RFID (radio frequency identification) 태그용 고감도 소형 공진기의 설계 방법을 제안하였다. 제안된 고감도 소형 공진기는 기존의 전계-결합(ELC; electric field-coupled) 공진기에서 커패시터 모양의 스트립 구조 대신에 인터디지털-커패시터(IDC; interdigital-capacitor) 구조를 사용하였다. IDC 구조의 극판 길이가 기존의 커패시터 모양 구조 보다 더 길어 공진기의 등가 커패시턴스가 더 커지고, 이로 인해 레이다 단면적(RCS; radar cross section)의 공진 피크 주파수를 낮출 수 있다. 정사각형 루프의 길이와 스트립의 폭이 같은 두 공진기를 두께 0.8 mm의 RF-301 기판에 제작하였다. 실험 결과, ELC 공진기는 bistatic RCS의 공진 피크 주파수와 값은 4.305 GHz와 -30.39 dBsm이었다. 제안된 IDC 공진기의 경우 bistatic RCS의 공진 피크 주파수와 값은 3.295 GHz와 -36.91 dBsm이었다. 따라서 측정 공진 피크 주파수를 기준으로 공진기 크기가 23.5% 정도 소형화되었다.

• Computers and Concrete
• /
• 제29권 6호
• /
• pp.375-391
• /
• 2022

This paper examined the impact of the cross-sectional structure on the structural results under different loading conditions of reinforced concrete (RC) members' management limited in Carbon Fiber Reinforced Polymers (CFRP). The mechanical properties of CFRC was investigated, then, totally 32 samples were examined. Test parameters included the cross-sectional shape as square, rectangular and circular with two various aspect rates and loading statues. The loading involved concentrated loading, eccentric loading with a ratio of 0.46 to 0.6 and pure bending. The results of the test revealed that the CFRP increased ductility and load during concentrated processing. A cross sectional shape from 23 to 44 percent was increased in load capacity and from 250 to 350 percent increase in axial deformation in rectangular and circular sections respectively, affecting greatly the accomplishment of load capacity and ductility of the concentrated members. Two Artificial Intelligence Models as Extreme Learning Machine (ELM) and Particle Swarm Optimization (PSO) were used to estimating the tensile and flexural strength of specimen. On the basis of the performance from RMSE and RSQR, C-Shape CFRC was greater tensile and flexural strength than any other FRP composite design. Because of the mechanical anchorage into the matrix, C-shaped CFRCC was noted to have greater fiber-matrix interfacial adhesive strength. However, with the increase of the aspect ratio and fiber volume fraction, the compressive strength of CFRCC was reduced. This possibly was due to the fact that during the blending of each fiber, the volume of air input was increased. In addition, by adding silica fumed to composites, the tensile and flexural strength of CFRCC is greatly improved.

• Safety and Health at Work
• /
• 제13권4호
• /
• pp.440-447
• /
• 2022

Background: Agricultural handle equipment is present on all production areas' farms. They are handy and portable; however, excessive use can lead to acute traumas or accidental injuries. Repetitive movements, awkward postures, and hand-arm vibrations predispose them to pain and work-related musculoskeletal disorders. The purpose of this study was to observe the interaction of handle equipment in terms of electromyographic activity and analyze the postural work-related alterations. Materials and methods: Twenty male agricultural operators, mean age 24±1.54 years, underwent the electromyographic analysis testing their muscular activities with a brushcutter, electric saw, and hedge trimmer in four different test conditions. Results: The brushcutter proved to be the agricultural handle equipment with the higher mean frequency (3.37±0.38 Hz) and root mean square (5.25±1.24 ms^-2). Furthermore, the digital postural analysis showed a general asymmetry of the main arm and the respective side of the trunk. The head resulted right inclined in the anterior frontal plane by 5.7°±1.2°; the right scapula lower than the left in the posterior frontal plane (8.5°±1.8°), and a working trunk inclination of 34.15°±5.7°. Conclusions: Vibrations of handle equipment and awkward working postures represent a risk for agricultural operators. Preventive measures are required to avoid young operators from experiencing musculoskeletal disorders all lifelong.

• 한국신재생에너지학회:학술대회논문집
• /
• 한국신재생에너지학회 2005년도 춘계학술대회
• /
• pp.638-642
• /
• 2005

For gas hydrate exploration, long offset multichannel seismic data acquired using by the 4km streamer length in Ulleung basin of the East Sea. The dataset was processed to define the BSRs (Bottom Simulating Reflectors) and to estimate the amount of gas hydrates. Confirmation of the presence of Bottom Simulating reflectors (BSR) and investigation of its physical properties from seismic section are important for gas hydrate detection. Specially, faster interval velocity overlying slower interval velocity indicates the likely presences of gas hydrate above BSR and free gas underneath BSR. In consequence, estimation of correct interval velocities and analysis of their spatial variations are critical processes for gas hydrate detection using seismic reflection data. Using Dix's equation, Root Mean Square (RMS) velocities can be converted into interval velocities. However, it is not a proper way to investigate interval velocities above and below BSR considering the fact that RMS velocities have poor resolution and correctness and the assumption that interval velocities increase along the depth. Therefore, we incorporated Migration Velocity Analysis (MVA) software produced by Landmark CO. to estimate correct interval velocities in detail. MVA is a process to yield velocities of sediments between layers using Common Mid Point (CMP) gathered seismic data. The CMP gathered data for MVA should be produced after basic processing steps to enhance the signal to noise ratio of the first reflections. Prestack depth migrated section is produced using interval velocities and interval velocities are key parameters governing qualities of prestack depth migration section. Correctness of interval velocities can be examined by the presence of Residual Move Out (RMO) on CMP gathered data. If there is no RMO, peaks of primary reflection events are flat in horizontal direction for all offsets of Common Reflection Point (CRP) gathers and it proves that prestack depth migration is done with correct velocity field. Used method in this study, Tomographic inversion needs two initial input data. One is the dataset obtained from the results of preprocessing by removing multiples and noise and stacked partially. The other is the depth domain velocity model build by smoothing and editing the interval velocity converted from RMS velocity. After the three times iteration of tomography inversion, Optimum interval velocity field can be fixed. The conclusion of this study as follow, the final Interval velocity around the BSR decreased to 1400 m/s from 2500 m/s abruptly. BSR is showed about 200m depth under the seabottom

• Asian Pacific Journal of Cancer Prevention
• /
• 제16권14호
• /
• pp.6033-6038
• /
• 2015

Background: Experience of lung cancer includes negative impacts on both physical and psychological health. Pain is one of the negative experiences of lung cancer. Cognitive behavioral therapy techniques are often recommended as treatments for lung cancer pain. The objective of this review was to synthesize the evidence on the effectiveness of cognitive behavioral therapy techniques in treating lung cancer pain. This review considered studies that included lung cancer patients who were required to 1) be at least 18 years old; 2) speak and read English or Thai; 3) have a life expectancy of at least two months; 4) experience daily cancer pain requiring an opioid medication; 5) have a positive response to opioid medication; 6) have "average or usual" pain between 4 and 7 on a scale of 0-10 for the day before the clinic visit or for a typical day; and 7) able to participate in a pain evaluation and treatment program. This review considered studies to examine interventions for use in treatment of pain in lung cancer patients, including: biofeedback, cognitive/attentional distraction, imagery, hypnosis, and meditation. Any randomized controlled trials (RCTs) that examined cognitive behavioral therapy techniques for pain specifically in lung cancer patients were included. In the absence of RCTs, quasi-experimental designs were reviewed for possible conclusion in a narrative summary. Outcome measures were pain intensity before and after cognitive behavioural therapy techniques. The search strategy aimed to find both published and unpublished literature. A three-step search was utilised by using identified keywords and text term. An initial limited search of MEDLINE and CINAHL was undertaken followed by analysis of the text words contained in the title and abstract, and of the index terms used to describe the article. A second search using all the identified keywords and index terms was then undertaken across all included databases. Thirdly, the reference list of all identified reports and articles were searched for additional studies. Searches were conducted during January 1991- March 2014 limited to English and Thai languages with no date restriction. Materials and Methods: All studies that met the inclusion criteria were assessed for methodological quality by three reviewers using a standardized critical appraisal tool from the Joanna Briggs Institute (JBI). Three reviewers extracted data independently, using a standardized data extraction tool from the Joanna Briggs Institute (JBI). Ideally for quantitative data meta-analysis was to be conducted where all results were subject to double data entry. Odds ratios (for categorical data) and weighted mean differences (for continuous data) and their 95% confidence intervals were to be calculated for analysis and heterogeneity was to be assessed using the standard Chi-square. Where statistical pooling was not possible the finding were be presented in narrative form. Results: There were no studies located that met the inclusion requirements of this review. There were also no text and opinion pieces that were specific to cognitive behavioral therapy techniques pain and lung cancer patients.Conclusions: There is currently no evidence available to determine the effectiveness of cognitive behavioural therapy techniques for pain in lung cancer patients.

• Journal of the Korean Wood Science and Technology
• /
• 제12권4호
• /
• pp.31-35
• /
• 1984

우리 나라 특산(特産) 수종(樹種)인 개나리속(屬)의 해부학적(解剖學的) 성질(性質)을 조사(調査)한 결과(結果)는 다음과 같다. 횡단면상(橫斷面上)의 도관(導管)은 거의 단일도관(單一導管)이었고, 2~3개(個)로 복합(複合)된 복합도관(複合導管)도 가끔 나타나고, 도관(導管)의 배열상태(排列狀態)는 복사공성(輻射孔性) 환공재(環孔材)이었다. 도관(導管)의 평균(平均) 길이는 개나리 $539.98{\pm}154.71{\mu}$, 만리화 $602.22{\pm}157.38{\mu}$, 장수만리화 $465.50{\pm}83.02{\mu}$이었다. 목섬유(木纖維)의 평균(平均) 길이는 개나리 $387.40{\pm}68.23{\mu}$, 만리화 $533.90{\pm}106.77{\mu}$, 장수만리화 $482.40{\pm}72.33{\mu}$ 이었다. 방사조직(放射組織)의 형(型)은 이성공형(異性工型)이었다.

• 한국조경학회지
• /
• 제42권2호
• /
• pp.1-9
• /
• 2014

본 연구는 국제적 명성을 얻고 있는 부산국제영화제를 테마로 한 가로 공간-영화의 거리-의 정비 계획을 정리한 것이다. 테마 거리의 정비 목표는 방문객 유치를 통한 지역 경제 활성화에 있다. 계획 수립의 과정은 먼저 테마 거리의 정비 사례를 분석하여 계획 대상지의 위상을 동정하였다. 그리고 관련 계획을 검토하여 본 계획과의 차별성을 확인하였다. 영화의 거리의 공간별 주제는 영화와 관계 맺기로 설정하여 가로 공간의 통일적 이미지를 구현하고자 하였다. 영화의 역사를 보도에 새겨 영화역사의 길을 조성하고, 일부 구간은 붉은색의 보도 블록을 부설하여 레드카펫거리를 조성하였다. 요트경기장에서 마린시티까지의 길은 영화와 친해지기를 주제로, 영화제작 조형물과 테마벤치를 설치하여 영화를 간접체험해 볼 수 있도록 했다. 다음 마린시티에서 동백섬까지는 영화와 놀며 즐기기로 슈퍼그래픽과 트릭아트 등을 활용해 재미있는 길을 만들고자 했다. 동백섬에서 해운대까지는 영화와 이별이라는 주제를 영화음악을 통해 풀어내 악보보도와 음악분수를 도입했다. 마지막 구간 해운대에서 문텐로드까지는 이별 후의 추억을 주제로 하는 문텐로드와의 중간지역이다. 광섬유를 이용해 은하수 보도와 은하수 광장을 조성하여 두 가지 역할을 모두 소화할 수 있는 지대로 조성하고자 했다.

• 한국건설관리학회논문집
• /
• 제20권1호
• /
• pp.52-61
• /
• 2019

2017년 6월 30일 국토교통부는 주차단위구획의 최소 크기를 확대하는 것을 입법 예고하였다. 주차단위구획의 확대는 주차장 연면적의 증가를 초래하여 아파트 분양가를 상승시킬 우려가 있다. 그러므로 주차장의 기둥 간격과 개수를 조정하고, 주차효율이 좋은 8-Bay 장스팬 주차모듈을 적용할 필요가 있다. 연구결과, 주차단위구획을 확대한 6-Bay 주차모듈과 8-Bay 주차모듈의 공사비는 거의 비슷한 수준이었으나, 8-Bay 주차모듈의 연면적 감소 효과가 확인되어 8-Bay 주차모듈이 더 경제적인 것으로 나타났다. 8-Bay 주차모듈의 공사비를 분석한 결과, 탈형데크플레이트 RC공법을 적용한 모듈이 가장 경제성이 있는 것으로 나타났다. PC 복합화공법은 부재의 체적 증가로 인해 비교적 공사비가 높게 나타났으나, 프리스트레스를 적용하여 보 춤을 감소시키면 경제성을 확보할 수 있을 것으로 확인되었다. 또한 중공슬래브 공법 모듈은 가장 공사비가 높게 나타났으나, $1m^2$당 공사비가 가장 낮아 비용적 측면에서 아파트 주차장의 구조공법으로 적용 가능성을 확인하였다. 이 연구는 8-Bay 주차모듈의 공사비를 분석하고 비용적 측면에서 경제성을 확인하였다는 점에서 의의를 가지며, 향후에 8-Bay 주차모듈을 적용한 최적의 공법을 도출하는데 기초자료로 활용될 것으로 기대된다.

• 한국강구조학회 논문집
• /
• 제16권2호통권69호
• /
• pp.247-255
• /
• 2004

본 실험프로그램은 슬래브가 있는 합성보의 내진성능향상을 위해 기존 모멘트접합부의 내진보강 방법을 개발을 목적으로 수행하였다. 반복하중을 통해 5개의 실대형 합성실험체에 대한 실험을 수행하였다. 각형강관기둥과 H형강보로 이루어진 기존의 다이아프램접합부가 RBS 또는 개량수평스티프너를 통해서 하부플랜지에만 내진 보강되었다. 제안한 보강접합부의 효율성을 조사하였다. 실험결과 하부플랜지에만 RBS를 적용한 접합부는 부족한 변형성능을 나타냈지만, 개량스티프너를 적용한 합성보 접합부는 내진성능을 향상시켰다.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2007년도 춘계학술대회B
• /
• pp.3529-3533
• /
• 2007

The advantages of the SITVC(secondary injection thrust vector control) technique over mechanical thrust vector systems include a reduction in both the nozzle weight and complexity due to the elimination of the mechanical actuators that are used in conventional vectoring. Computational study is performed to understand the fluidic thrust vectoring control of an axisymmetric nozzle, in which secondary gas injection is made in the divergent section of the nozzle. The nozzle has a design mach number 3. The effect of injection hole number and shape of secondary jet on the mach number distribution of SITVC were investigated. The standard ${\kappa}$ - ${\epsilon}$ turbulence model solved the complex three-dimensional nozzle flows perturbed by the secondary gas jet. The numerical code was validated by experiment. The results showed that the mach number distribution of circular and square nozzle are similar each other. As number of second injection hole increasing, a effect of deflection was decreased.