• International Journal of Contents
• /
• 제3권4호
• /
• pp.26-29
• /
• 2007

The paper is devoted to problem of spline approximation. A new method of nodes location for curves and surfaces computer construction in multidimensional spaces by means of B-splines is presented. The criteria are which links a square-mean error caused by high frequency spline distortions and approximation intervals is determined and necessary theorem is proved. In this method use a theory of entire multidimensional spectra and may be extended for the spaces of three, four and more variables. Future work: application area such as digital contents like animation, game graphic.

• 한국자동차공학회논문집
• /
• 제6권4호
• /
• pp.141-150
• /
• 1998

The measurement of strains in stamped sheet metal is essential to the design and manufacture of sound sheet metal products. The measured strains can also be used in verifying the reliability of the computer analysis such as finite element analysis. In most engineering applications, strains are measured from the deformed square grids or deformed circular grids in comparison with the initial undeformed grids. In such a case, however, strains are averaged in each grid and the localized strain in a region smaller than a grid size can not be measured. In the present study, the B-spline surface interpolation technique is introduced in order to measure the strains more exactly and effectively. The strains calculated by using the surface interpolation technique are compared with the strains calculated from the three-noded grids as well as with the finite element analysis.

• 전자공학회논문지B
• /
• 제33B권7호
• /
• pp.99-106
• /
• 1996

Estimation and removal procedures for baseline drift have been developed using linear, cubic spline, and bilineared transformed high pass filter. Linear and cubic spline interpolation with the PQ and TP segmens, which are considered to be isoelectric, as fiducial points ahve been estimated respectively. For a quantitative validation of the estimation procedure, 4 ECGs with arfificial baseline drift were constructed and analyzed by mean square error calculations and amplitude histograms. Also real ECGs were analyzed in a test set of the CSE data set 3 and set 4. Baseline drift detecton rule were designed and new method for the decision of fiducial point were constructed to avoid distorting as the case of premature ventricular or atrial contraction. From these comparison, proposed cubic spline method with PQ and TP segment (CS_PQ & TP) emerged as the most efficient method.

• 한국항공우주학회지
• /
• 제39권12호
• /
• pp.1124-1132
• /
• 2011

본 논문에서는 2차원 공간에서 기동하는 고정익 무인항공기의 장애물 회피를 위한 부드러운 경로궤적을 생성하는 문제를 다룬다. 2차원 장애물맵의 이산화 모델링을 위해 육각형 격자를 채택하였고, 이는 사각형 격자에 비해 연결성이 높아 부드러운 경로궤적 생성이 가능하도록 하였다. 특히 본 논문에서 제안된 경로템플릿 기법은 일정거리 단위로 조합 가능한 대표경로들(경로템플릿)을 사용하여 무인항공기의 기준경로를 생성하는 방법이고, 온라인 경로궤적 생성에서 계산량을 줄여 메모리 및 연산리소스가 제한되는 소형 오토파일럿에서도 적용이 가능하다는 장점이 있다.

• 한국컴퓨터그래픽스학회논문지
• /
• 제22권5호
• /
• pp.1-16
• /
• 2016

본 논문에서는 최소자승법에 기반한 효율적인 곡선 복구 기법을 제안한다. 구체적으로는, 법선 벡터를 포함한 평면상의 샘플포인트가 주어졌을 때 계층적인 ZP(Zwart-Powell)-스플라인의 레벨로 곡선을 복구하는데, 세밀한 부문을 복구하면서도 비교적 큰 구멍도 효율적으로 메꾸고 있다. 정규화를 위해서는, (1) 선형시스템의 특이성을 피하기 위한 티코노프 정규항과 (2) 아이소커브를 부드럽게 하기 위한 이산 라플라스 정규항 두 가지를 사용하고 있다. 정량적인 벤치마크 테스트를 통해 비교한 결과, 본 방법은 다항식에 기반한 기법들에 비해 훨씬 우수한 결과를 보여준다는 것을 확인할 수 있다. 구멍이 있는 데이터의 경우, 계층적인 B-스플라인과 비교해본 결과 엇비슷한 품질을 보이지만 약 90%의 계산량만을 필요로 한다.

• Structural Engineering and Mechanics
• /
• 제38권6호
• /
• pp.733-751
• /
• 2011

In the present study, a new kind of multivariable Reissner-Mindlin plate elements with two kinds of variables based on B-spline wavelet on the interval (BSWI) is constructed to solve the static and vibration problems of a square Reissner-Mindlin plate, a skew Reissner-Mindlin plate, and a Reissner-Mindlin plate on an elastic foundation. Based on generalized variational principle, finite element formulations are derived from generalized potential energy functional. The two-dimensional tensor product BSWI is employed to form the shape functions and construct multivariable BSWI elements. The multivariable wavelet finite element method proposed here can improve the solving accuracy apparently because generalized stress and strain are interpolated separately. In addition, compared with commonly used Daubechies wavelet finite element method, BSWI has explicit expression and a very good approximation property which guarantee the satisfying results. The efficiency of the proposed multivariable Reissner-Mindlin plate elements are verified through some numerical examples in the end.

• Journal of Ship and Ocean Technology
• /
• 제3권4호
• /
• pp.1-14
• /
• 1999

The improved Green integral equation using the Kelvin-type Green function in known free of irregular frequencies where the integral over the inner free surface integral is removed from the integral equation, resulting in an overdetermined integral equation. The solution of the overdetermined Green integral equation is shown identical with the solution of the improved Green integral equation Using the B-spline higher order panel method, the overdetermined equation is discretized in two different ways; one of the resulting linear system is square and the other is redundant. Numerical experiments show that the solutions of both are identical. Using the present methods, the exact values and higher derivatives of the potential at any place over the wetted surface of the body can be found with much fewer panels than low order panel method.

• International Journal of Aeronautical and Space Sciences
• /
• 제17권1호
• /
• pp.64-72
• /
• 2016

The coverage area of a GNSS regional ionospheric delay model is mainly determined by the distribution of GNSS ground monitoring stations. Extrapolation of the ionospheric model data can extend the coverage area. An extrapolation algorithm, which combines observed ionospheric delay with the environmental parameters, is proposed. Neural network and least square regression algorithms are developed to utilize the combined input data. The bi-harmonic spline method is also tested for comparison. The IGS ionosphere map data is used to simulate the delays and to compute the extrapolation error statistics. The neural network method outperforms the other methods and demonstrates a high extrapolation accuracy. In order to determine the directional characteristics, the estimation error is classified into four direction components. The South extrapolation area yields the largest estimation error followed by North area, which yields the second-largest error.

• 한국농공학회논문집
• /
• 제53권5호
• /
• pp.1-7
• /
• 2011

The objective of this study is to decide a spatial interpolation method on temperature data for the suitability analysis of garlic cultivation. In Korea, garlic is the second most cultivated condiment vegetable after red pepper. Nowadays warm-temperate garlic faces potential shift of its arable area according to warmer temperature in the Korean Peninsula, and the change can be drawn with the precise temperature map derived from interpolation on point-measured data. To find the preferable interpolation method in cases of germination and vegetative period of the garlic, different approaches were tested as follows: Inverse Distance Weighted (IDW), Spline, Ordinary Kriging (OK), and Universal Kriging (UK). As a result, IDW and UK show the lowest root mean square errors as for the germination and vegetative seasons, respectively. However, statistically significant difference was not revealed among the applied methods regarding the germinating period. Eventually this will contribute to mapping the suitable lands for the cultivation of warm-temperate garlic reasonably.

• International Journal of Fuzzy Logic and Intelligent Systems
• /
• 제5권4호
• /
• pp.286-290
• /
• 2005

We consider the poisson equation where the functions involved are periodic including the solution function. Let $R=[0,1]{\times}[0,l]{\times}[0,1]$ be the region of interest and let $\phi$(x,y,z) be an arbitrary periodic function defined in the region R such that $\phi$(x,y,z) satisfies $\phi$(x+1, y, z)=$\phi$(x, y+1, z)=$\phi$(x, y, z+1)=$\phi$(x,y,z) for all x,y,z. We describe a very simple method for solving the equation ${\nabla}^2u(x, y, z)$ = $\phi$(x, y, z) based on the cubic spline interpolation of u(x, y, z); using the requirement that each interval [0,1] is a multiple of the period in the corresponding coordinates, the Laplacian operator applied to the cubic spline interpolation of u(x, y, z) can be replaced by a square matrix. The solution can then be computed simply by multiplying $\phi$(x, y, z) by the inverse of this matrix. A description on how the storage of nearly a Giga byte for $20{\times}20{\times}20$ nodes, equivalent to a $8000{\times}8000$ matrix is handled by using the fuzzy rule table method and a description on how the shape preserving property of the Laplacian operator will be affected by this approximation are included.