• Journal of the Korea Concrete Institute
• /
• v.17 no.6 s.90
• /
• pp.1025-1032
• /
• 2005

This paper presents experimental and analytical studies on long-term behavior of square CFT columns with diaphragm. In order to investigate the effect of the diaphragm on the long~term behavior, experiments for six specimens with two diaphragms and three different column length, and three-dimensional finite element analysis for each specimen have been performed. The finite element models considering the interface behavior between the steel tube and the inner concrete were verified from comparison of the test results with the analysis results. From the test and the analysis results, the following conclusions were obtained. The confinement effect created by the diaphragm does not depends on column length and influences only a part of the whole column that is from the end to the depth which is the same to the width of the column. The shortening of the column with diaphragm which covers more than a half of the cross sectional area of the inner concrete is the same as that of the column under a load applied on the steel tube and the entire section of the inner concrete.

• Journal of the Korean Institute of Gas
• /
• v.26 no.2
• /
• pp.49-55
• /
• 2022

According to reinforce environmental regulations, coal power plants have used selective catalytic reduction using ammonia as a reducing agent to reduce the amount of nitrogen oxide generation. The purpose of the present study was to derive a mixing device for effectively mixing dilute air and ammonia in the ammonia mixing pipe by performing computational fluid dynamic analysis. The mixing effect was compared by analysing the %RMS of ammonia concentration at the down stream cross section in the mixing pipe and the 16 outlets based on the case 1-1 shape, which is an existing mixing pipe without a mixing device. The mixing device was performed by changing the positions of a square plate on the downstream side of the ammonia supply pipe and an arc-shaped plate on the wall of the mixing pipe. In the case of the existing geometry(Case 1-1), the %RMS of ammonia concentration at the 16 outlets was 29.50%. The shape of the mixing device for Case 3-2 had a square plate on the downstream side of the ammonia supply pipe and an arc plate was installed adjacent to it. The %RMS of ammonia concentration for Case 3-2 was 2.08% at 16 outlets and it could be seen that the shape of Case 3-2 was the most effective mixing shape for ammonia mixing.

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.35 no.6
• /
• pp.128-137
• /
• 2023

In this study, the bearing pressure on the rubble mound of a gravity-based harbor structure with an arbitrarily shaped bottom was targeted. Assuming that the bottom of the structure is a rigid body, the rubble mound was modeled as a linear spring uniformly distributed on the bottom that resists compression only, and the bearing pressure evaluation formula was derived. It was confirmed that there were no errors in the derivation process by showing that when the bottom was square, the derived equation was converted to the equation used in the design. In addition, the validity of the derived equation was proven by examining the behavior and convergence value of the bearing pressure when an arbitrarily shaped bottom converges into a square one. In order to examine the adequacy of the method used in the current design, the end bearing pressure for the pre-designed breakwater cross-section was calculated and compared with the values in the design document. As a result, it was shown that the method used for design was not appropriate as it gave unsafe results. In particular, the difference was larger when the eccentricity of the vertical load was large, such as in the case of extreme design conditions.

• Journal of the Korean Association of Oral and Maxillofacial Surgeons
• /
• v.30 no.6
• /
• pp.504-508
• /
• 2004

Surgical process of oral and maxillofacial area as well as dental treatment are stressful situations to the patients. It is well known that serum level of stress hormones including adrenocorticotropic hormone(ACTH) and cortisol increase when the body is exposed to stress. However, there have been few studies on demographic and clinical factors related with stress. Therefore, the purpose of this study was to supply data to cope with stress more comprehensively and efficiently by analyzing the effect of factors related with stress in addition to surgical procedure. Prospective cohort study method was selected. Serum levels of ACTH and cortisol were measured by sampling bloods pre-operatively and post-operatively from 45 patients who had been operated at the Bundang Jesaeng Hospital department of oral and maxillofacial surgery. To evaluate factors associated with stress, patients were classified according to gender, age, method of payment(insurance or self), experiences of operation, kind of operations(expected operations or unexpected operations). Relative risk was calculated to assess relationships between changes of serum level of ACTH and cortisol and factors related with stress, whereas Chi-square analysis was executed to evaluate statistical significance. With regard to serum level of ACTH, relative risk was 1.3 in the group of the patients who were less than 40 years old. With regard to serum level of cortisol, relative risk was 1.8 for women compared with men, 1.4 in the group of the patients who were less than 40 years old and 1.6 in the group of the patients who had not experienced any other operations. In addition to surgical procedure, factors related with stress included gender, age, method of payments, experiences of operation and kind of operations. Therefore, we should provide comprehensive schemes to reduce stress of the patients going through oral and maxillofacial surgery.

• The Journal of Engineering Geology
• /
• v.18 no.1
• /
• pp.45-54
• /
• 2008

Based on the data obtained from field investigation and soil testing to slope hazards occurrence section and non-occurrence section in gneiss area, a prediction technique was developed by the use of a decision tree model, which is one of the statistical analysis methods. The slope hazards data of Seoul and Kyonggi Province, which were induced by heavy rainfall in 1998, were 104 sections in gneiss area. The number of data applied in developing prediction model was 61 sections except a vacant value. Among these data, the number of data occurred slope hazards was 34 sections and the number of data non-occurred slope hazards was 27 sections. The statistical analyses using the decision tree model were applied to chi-square statistics, gini index and entrophy index. As the results of analyses, a slope angle, a degree of saturation and an elevation were selected as the classification standard. The prediction model of decision tree using entrophy index is most likely accurate. The classification standard of the selected prediction model is composed of the slope angle, the degree of saturation and the elevation from the first choice stage. The classification standard values of the slope angle, the degree of saturation and elevation are $17.9^{\circ}$, 52.1% and 320 m, respectively.

• The Journal of Korean Obstetrics and Gynecology
• /
• v.23 no.2
• /
• pp.106-115
• /
• 2010

Purpose: The purposes of this study were in understanding maternal and neonatal risk factors for postpartum depression using Edinburgh Postnatal Depression Scale(EPDS). Methods: Among 788 women, who had delivery include cesarean section in the department of obstetrics and gynecology at OO medical center from May 28th 2008 to October 6st 2009, 72 women filled out EPDS questionnaire sheets. Additional aspects included for the analysis are maternal factors including age, number of children, parity, delivery method, and hemoglobin; and neonatal factors such as weight, sex, gestational age, apgar score, and neonatal intensive care unit admission. Comparison was performed between the women with EPDS score equal or less than 8 and the women with EPDS score equal to or higher than 9 using statistical methods of student t-test for linear variables and chi-square test for non-linear variables. SPSS version 13.0 for windows was used for analysis. Results: Thirty women(41.7%) were included in the postpartum depression risk group (EPDS score ${\geqq}9$). Statistically significant difference(P<0.05) was found in gestational ages of the risk group($36.57{\pm}29.6$ weeks) and the non-risk group ($38.10{\pm}1.97$ weeks). Identified statistically significant risk factors(P<0.05) include cesarean section (OR=3.304 [1.121-9.744]), low birth weight infant(OR =6.500 [1.606-26.314]), preterm delivery(OR=2.857[1.071-7.621]), low apgar score (1minute) after delivery (OR=14.909 [1.750-127.025]). There was no statistically significant difference in maternal age, number of children, parity, hemoglobin, neonatal sex, apgar score (5minutes), NICU admission. Conclusions: Through the results showed, gestational age, delivery method, neonatal weight, apgar score(1minute) were identified as risk factors for postpartum depression. To prevent or minimize postpartum depression, oriental medical intervention is recommended for pregnant women through early detection.

• Journal of Korean Society of Transportation
• /
• v.22 no.3 s.74
• /
• pp.109-125
• /
• 2004

In recent decades, microscopic simulation models have become powerful tools to analyze traffic flow on highways and to assist the investigation of level of service. The existing microscopic simulation models simulate an individual vehicle's speed based on a constant free-flow speed dominantly specified by users and driver's behavior models reflecting vehicle interactions, such as car following and lane changing. They set a single free-flow speed for a single vehicle on a given link and neglect to consider the effects of highway design elements to it in their internal simulation. Due to this, the existing models are limitted to provide with identical simulation results on both curved and tangent sections of highways. This paper presents a model developed to estimate the change of free-flow speeds based on highway design elements. Nine neural network models were trained based on the field data collected from seven different freeway curve sections and three different locations at each section to capture the percent changes of free-flow speeds: 100 m upstream of the point of curve (PC) and the middle of the curve. The model employing seven highway design elements as its input variables was selected as the best : radius of curve, length of curve, superelevation, the number of lanes, grade variations, and the approaching free-flow speed on 100 m upstream of PC. Tests showed that the free-flow speeds estimated by the proposed model were statistically identical to the ones from the field at 95% confidence level at each three different locations described above. The root mean square errors at the starting and the middle of curve section were 6.68 and 10.06, and the R-squares at these points were 0.77 and 0.65, respectively. It was concluded from the study that the proposed model would be one of the potential tools introducing the effects of highway design elements to free-flow speeds in simulation.

• Journal of Korean Society of Steel Construction
• /
• v.16 no.3 s.70
• /
• pp.315-324
• /
• 2004

This study performs a yield line analysis of welded T-joints in cold-formed Square Hollow Sections (SHS) with the branch in axial compression. The existing yield line models proposed by Koto, Packer, Zhao, and CIDECT and the proposed yield line model of the previous study are compared, using the existing test results of welded T-joints in cold-formed SHS. The yield line model suggested in the previous paper, which is based on the simplified yield line analysis, is reviewed to evaluate its application limit on cold-formed SHS T-joints. In the proposed model, the round corner of the cold-formed SHS section and weld size are taken into account. Finally, the validity range of yield line analysis is determined by observing the actual failure modes and comparing the test value with the analysis value, set as ${\beta}^{\prime}{\leq}0.8$ where ${\beta}^{\prime}=0.8$, ${\beta}^{\prime}=b_1^{\prime}/b_0^{\prime}$, $b_1{^{\prime}}=b_1+t_0$ and $b_0{^{\prime}}=b_0-t_0$.

• Korean Chemical Engineering Research
• /
• v.47 no.5
• /
• pp.572-579
• /
• 2009

This study is to investigate experimentally the flame structure and propagation mechanism in dust explosions and to provide the fundamental knowledge. Upward propagating laminar dust flames in a vertical duct of 1.8 m height and 0.15 m square cross-section are observed and flame front is visualized using by a high-speed video camera. Also, the thicknesses of preheated and reaction zone have been determined by a schlieren, electrostatic probe and thermocouple. The thickness of preheated zone in lycopodium dust flame is observed to be 4~13 mm, about several orders of magnitude higher than that of premixed gaseous flames. From the experimental results by a PIV(Particle Image Velocimetry) system, a certain residence time of the unburned particle in preheated zone is needed to generate combustible gas from the particle. The residence time will depend on preheated zone thickness, particle velocity and flame propagation velocity.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.29 no.8A
• /
• pp.950-961
• /
• 2004

In this paper, we measured and analyzed propagation characteristics in a subway tunnel that is recently increasingly becoming one of the radio communication environments. The measurements are carried out in a subway tunnel with frequency bands of 2.45㎓ and 5.8㎓. The length of tunnel we used for this study is 175m of LOS (Line-of-sight) and 270m of NLOS (Non Line-of-Sight). The subway tunnel is curved and its cross section is horseshoe type. The measurement systems we employ in this study are a narrow-band system and a wide-band system. The narrow-band system is used to get path loss measurement and the wide-band system is used to figure out delay profile measurement. In particular, the wide-band system consists of 1023 length PN sequence generator using a chip rate of 80MHz based on a sliding correlation technique. The omni-directional antennas and directional antennas are used to analyze propagation characteristics for beam type of antenna. The path loss displays only pure path loss of a tunnel environment. The delay profile indicates the mean excess delay and RMS (root mean square) delay spread.