• 대한한의학원전학회지
• /
• 제23권1호
• /
• pp.101-114
• /
• 2010

In the perspective of the correspondence of heaven and man[天人相應], people live through Gi of heaven and earth[天地之氣], and the human body which is a small universe[小宇宙] itself receives influence while sympathizing with the Gi and heaven[天氣]. So with unexpected incident of the Eum and Yang, four season[陰陽四時], ups and downs of warmth of cold and chilliness of warm[寒熱溫涼] differs, and the position of Gi of human[人氣] changes, regimen and application of acupuncture, and images[象] of the pulse changes. In "Maekyojeongmiron(脈要精微論)", ups and downs of Eum and Yang changes by four season[四時], and correspondence of ups and downs of pulse law is explained with compass, carpenter's square, the beam of balance and the weight of balance[規矩權衡]. Compass[規] is a measure of instrument that can draw a circle, like regulating the measure and differing the center of the circle and diameter and drawing a circle, compass is a image of Gi of Yang[陽氣] that was staying deep inside the body in winter stretching out by big fault[太過不及] of year and energy[元氣] of human in spring. Carpenter's square[矩] is a instrument that draws direction, which is a image of Gi of Yang flourishing in summer and when it gets highly flourished, again the Gi of Eum[陰氣] comes alive and falls. The beam of balance[衡] is a scale, like a scale that tilts at once when one side is slightly heavy, the beam of balance is a image Gi of yang that is fully flourished in summer and about to descent again, which is just about to fall but not going down yet. The weight of balance [權] is a image of gi of yang which as descent to the bottom and staying in the deepest place. compass, carpenter's square, the beam of balance and the weight of balance is not a direct pulse image[脈象], but standard image of pulse of pulse corresponding to the Gi of human[人氣] that changes by four season, and the explanation includes the pulse image of four season like the taut, full, floating, deeply gather[弦鉤浮營] of "Okgijinjangron(玉機眞藏論)" or taut, full, skip, float, deep [弦鉤代毛石] of "Pyeong-ingisangron(平人氣象論)". So with compass, carpenter's square, the beam of balance and the weight of balance, can judge is human correspond in Eum and Yang, four seasons, this is importantly used in examination of pulse[診脈] with existence and nonexistence, and prognosis of illness.

• 대한기계학회논문집A
• /
• 제24권1호
• /
• pp.79-86
• /
• 2000

In this study, a method of optimal blank design using the sensitivity analysis has been proposed. To get sensitivity a well-known commercial code PAM-STAMP has been used. In order to verify this method, formings of square cup, clover shaped cup and L shaped cup have been chosen as the examples. With the predicted optimal blank both computer simulation and experiment are performed. Excellent agreements are recognized between the numerical results and the target contour shapes. Through the investigation, the proposed systematic method of optimal blank design is found to be effective in the design of the deep drawing process.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 1994년도 추계학술대회 논문집
• /
• pp.44-54
• /
• 1994

A variational formulation and the associated finite elemet equations have been derived for general three-dimensional deformation of a planar anisotropic rigid-plastic sheet metal which obeys the strain-rate potential proposed by BARLAT et al [13]. By using the natural convected coordinate system, the effect of geometric change and the rotation of planar anisotropic axes are considered efficiently. In order to check the validity of present formulation, a cylindrical cup and a square cup deep drawing test was modeled. good agreement was found between the FE simulation and the experiment. The results have shown that the present formulation for planar anisotropic deformation can be efficiently applied to the analysis of sheet metal working processes for planar anisotropic nonferrous metals.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 1998년도 제2회 박판성형심포지엄 논문집 박판성형기술의 현재와 미래
• /
• pp.171-182
• /
• 1998

An automated surface-strain measuring system using the image processing technique is developed in the present study, which consists of the hardware to capture and to display digital images, and the software to calculate the 3D informations of grid points from two views. New or improved algorithms the mapping and establishing correspondence of grid points and elements, the camera calibration, and the subpixel measurement of grid points, are implemented. As an application of the present system the surface-strains of deformed blanks in the limitting dome height test, the square cup deep-drawing and punch stretching to obtain the forming limit diagram are measured. The results are compared with those obtained by conventional manual methods.

• 소성∙가공
• /
• 제7권6호
• /
• pp.575-585
• /
• 1998

An automated surface-strain measuring system using the image processing technique is developed in the present study which consists of the hardware to capture and to display digital images. and the software to calculate the 3-D informations of grid points from two views. New or improved algorithms for the mapping and establishing correspondence of grid points and elements the camera calibration and the subpixel measurement of grid points are implemented. As an application of the present system the surface-strains of deformed blanks in the limitting dome height test the square cup deep-drawing and punch stretching to obtain the forming limit diagram are measured. The results are com-pared with those obtained by conventional manual methods.

• 한국산학기술학회논문지
• /
• 제18권6호
• /
• pp.692-696
• /
• 2017

프레스 부품의 형상은 고객 요구와 공정단축 및 비용절감으로 점점 복잡하게 변하고 있다. 또한 프레스공정은 많은 인자의 영향으로 양산 중에도 안정성이 수시로 변하고 있다. 공정의 안정성을 확보하는 데는 형상, 소재, 프레스, 금형 및 윤활에 대한 사전 연구가 충분히 되어 허용된 공차 안에서 재현성이 구현되는 공정을 수립해야 한다. 하지만 예측하지 못한 공정인자들의 변화는 양산라인 정지와 생산계획에 차질을 현장에서 야기 시키고 있다. 이에 프레스금형에 센서를 적용해 실시간 공정을 모니터링 할 수 있는 방법을 본 논문에선 소개한다. 비접촉식으로 판재의 흐름을 측정하는 센서와 그 중 양산에 적용 가능성이 높은 광학센서를 사용한 실험 사례를 제시했다. 원통드로잉금형에 광학센서를 설치해 소재, 블랭크홀더힘, 드로잉비를 변화시키며 센서의 사용 가능성을 테스트했다. 또한 각통드로잉 금형을 사용해 국부적으로 다른 판재의 흐름을 정량화 했고 측정값이 소재의 연신에 의해 드로잉 깊이보다 항상 작다는 것을 정량적으로 측정하였다. 마지막으로 프레스 금형에 센서를 접목시켜 사용할 수 있는 분야에 대해 제안을 하였다. 원가절감에 대한 Needs가 지속적으로 증가하고 이를 통해 글로벌 금형경쟁력을 확보해야하는 시점에 기여가 되었으면 한다.

• 한국산학기술학회논문지
• /
• 제16권9호
• /
• pp.5789-5794
• /
• 2015

최근 스마트 폰, 모바일 PC 제품의 외관에 필요한 가벼운 금속제품으로 제조를 하기 위하여 알루미늄 압출 공정과 CNC 가공기법을 적용한 생산방식이 널리 사용되고 있다. 하지만, 알루미늄 압출법은 외관 디자인의 제약이 있으며, 특히 CNC 가공 프로세스가 상대적으로 높은 생산 비용 및 낮은 생산성으로 생산단가가 많이 높은 단점이 있다. 본 연구에서, 새로운 처리 방법을 순서 재료비를 대폭 감소시키고, 제조 속도를 향상시키기 위해 판재성형과 부피성형의 두가지 공정을 섞어 새로운 판단조 공정을 개발하였다. 새로운 판단조 공법(hybrid plate forging)이란 우선 일반적인 딥드로잉으로 중간 모양을 만든 후 원하는 벽 부위만 증육을 하는 방법을 의미한다. 이러한 판단조 공법을 활용하여 재료의 낭비와 제조 시간을 최소화하는 것이 가능하게 된다. 본 연구에서는 상용 유한 요소 프로그램 AFDEX-2D를 통해 판단조공정을 설계하였고 최적의 사용 가능한 소재의 두께와 초기 폭을 설계하였다. 최종적으로 실제 노트북 케이스 금형을 제작하여 제안한 방법의 타당성을 검증하였다.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 1999년도 춘계학술대회논문집
• /
• pp.14-17
• /
• 1999

The wrinkling behavior of a thin sheet with perfect geometry is a kind of compressive instability. The compressive instability is influenced by many factors such as stress state mechanical properties of the sheet material geometry of the body contact conditions and plastic anisotropy. The analysis of compressive instability in plastically deforming body is difficult considering all the factors because the effects of the factors are very complex and the instability behavior may show wide variation for small deviation of the factors. In this study the bifurcation theory is introduced for the finite element analysis of puckering initiation and growth of a thin sheet with perfect geometry. All the above mentioned analysis and the post-bifurcation behavior is analyzed by introducing the branching scheme proposed by Riks. The finite element formulation is based on the incremental deformation theory and elastic-plastic material modeling. in order to investigate the effect of plastic anisotropy on the compressive instability a square plate that is subjected to compression in one direction and tension in the other direction is analyzed by the above-mentionedfinite element analysis. The critical stress ratios above which the buckling does not take place are found for various plastic anisotropic modeling method and discussed. Finally the effect of plastic anisotropy on the puckering behavior in the spherical cup deep drawing process is investigated.